Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Souza, Jose" <jose.souza@intel.com>
To: "intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>,
	"Deak, Imre" <imre.deak@intel.com>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>,
	"Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Subject: Re: [PATCH v2 5/5] drm/i915/icl: Fix port B combo PHY context loss after DC transitions
Date: Wed, 7 Nov 2018 20:46:53 +0000	[thread overview]
Message-ID: <106e908eccf9b3ecef83a044df4f275c6eba671b.camel@intel.com> (raw)
In-Reply-To: <20181106160621.23057-6-imre.deak@intel.com>


[-- Attachment #1.1: Type: text/plain, Size: 2003 bytes --]

On Tue, 2018-11-06 at 18:06 +0200, Imre Deak wrote:
> On ICL DMC/PCODE retains the HW context only for port A across DC
> transitions, for the other port B combo PHY, it doesn't. So we need
> to
> do this manually after exiting from DC6. Do the reinit even after
> exiting from DC5, it won't hurt since we only reinit the PHY in case
> it's needed (in case it was disabled to begin with).
> 
> As can be guessed from the bugzilla report leaving the PHY uninited
> will
> lead to a later timeout during the port B specific AUX and DDI_IO
> power
> well enabling.
> 
> v2:
> - Apply the fix on all GEN>=11 platforms. (Rodrigo)
> 
> Bspec: 21257
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108070
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

> Cc: José Roberto de Souza <jose.souza@intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_runtime_pm.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> b/drivers/gpu/drm/i915/intel_runtime_pm.c
> index f8da471e81aa..c20f25d6964a 100644
> --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> @@ -843,6 +843,14 @@ static void gen9_dc_off_power_well_enable(struct
> drm_i915_private *dev_priv,
>  
>  	if (IS_GEN9_LP(dev_priv))
>  		bxt_verify_ddi_phy_power_wells(dev_priv);
> +
> +	if (INTEL_GEN(dev_priv) >= 11)
> +		/*
> +		 * DMC retains HW context only for port A, the other
> combo
> +		 * PHY's HW context for port B is lost after DC
> transitions,
> +		 * so we need to restore it manually.
> +		 */
> +		icl_combo_phys_init(dev_priv);
>  }
>  
>  static void gen9_dc_off_power_well_disable(struct drm_i915_private
> *dev_priv,

[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2018-11-07 20:46 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-06 16:06 [PATCH v2 0/5] drm/i915/icl: Fix combo PHY HW context loss Imre Deak
2018-11-06 16:06 ` [PATCH v2 1/5] drm/i915/icl: Fix combo PHY uninit Imre Deak
2018-11-07 20:37   ` Souza, Jose
2018-11-06 16:06 ` [PATCH v2 2/5] drm/i915/cnl+: Move the combo PHY init/uninit code to a new file Imre Deak
2018-11-06 16:16   ` Ville Syrjälä
2018-11-06 17:00     ` Imre Deak
2018-11-07 20:41   ` Souza, Jose
2018-11-06 16:06 ` [PATCH v2 3/5] drm/i915/cnl+: Verify combo PHY HW state during PHY uninit Imre Deak
2018-11-07 20:46   ` Souza, Jose
2018-11-06 16:06 ` [PATCH v2 4/5] drm/i915/icl: Skip init for an already enabled combo PHY Imre Deak
2018-11-06 16:06 ` [PATCH v2 5/5] drm/i915/icl: Fix port B combo PHY context loss after DC transitions Imre Deak
2018-11-07 20:46   ` Souza, Jose [this message]
2018-11-07 11:05 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/icl: Fix combo PHY HW context loss (rev2) Patchwork
2018-11-07 11:07 ` ✗ Fi.CI.SPARSE: " Patchwork
2018-11-07 11:31 ` ✗ Fi.CI.BAT: failure " Patchwork
2018-11-07 11:37 ` Patchwork
2018-11-07 11:40 ` ✓ Fi.CI.BAT: success " Patchwork
2018-11-07 11:44 ` Patchwork
2018-11-08 17:34   ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=106e908eccf9b3ecef83a044df4f275c6eba671b.camel@intel.com \
    --to=jose.souza@intel.com \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox