From: Jani Nikula <jani.nikula@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com
Subject: [PATCH v2 2/7] drm/i915/lvds: only call intel_lvds_init() on platforms that might have LVDS
Date: Tue, 22 Jan 2019 10:23:02 +0200 [thread overview]
Message-ID: <20190122082307.4003-2-jani.nikula@intel.com> (raw)
In-Reply-To: <20190122082307.4003-1-jani.nikula@intel.com>
With new platforms not having LVDS support, only call intel_lvds_init()
on platforms that might actually have LVDS. Move the comment about eDP
init to the PCH block where it's relevant.
This puts intel_lvds_init() more in line with the rest of the outputs,
and makes it slightly easier for the uninitiated to figure out which
platforms actually have what.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 20 +++++++++++++-------
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9e0f34524d0b..29a7dd4afe0e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -14313,13 +14313,6 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
if (!HAS_DISPLAY(dev_priv))
return;
- /*
- * intel_edp_init_connector() depends on this completing first, to
- * prevent the registeration of both eDP and LVDS and the incorrect
- * sharing of the PPS.
- */
- intel_lvds_init(dev_priv);
-
if (IS_ICELAKE(dev_priv)) {
intel_ddi_init(dev_priv, PORT_A);
intel_ddi_init(dev_priv, PORT_B);
@@ -14383,6 +14376,13 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
} else if (HAS_PCH_SPLIT(dev_priv)) {
int found;
+ /*
+ * intel_edp_init_connector() depends on this completing first,
+ * to prevent the registration of both eDP and LVDS and the
+ * incorrect sharing of the PPS.
+ */
+ intel_lvds_init(dev_priv);
+
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
@@ -14460,11 +14460,15 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
vlv_dsi_init(dev_priv);
} else if (IS_PINEVIEW(dev_priv)) {
+ intel_lvds_init(dev_priv);
+
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
} else if (IS_GEN_RANGE(dev_priv, 3, 4)) {
bool found = false;
+ intel_lvds_init(dev_priv);
+
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
@@ -14500,6 +14504,8 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
if (IS_G4X(dev_priv) && (I915_READ(DP_D) & DP_DETECTED))
intel_dp_init(dev_priv, DP_D, PORT_D);
} else if (IS_GEN(dev_priv, 2)) {
+ intel_lvds_init(dev_priv);
+
if (dev_priv->vbt.int_crt_support)
intel_crt_init(dev_priv);
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-01-22 8:21 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-22 8:23 [PATCH v2 1/7] drm/i915/crt: split out intel_crt_present() to platform specific setup Jani Nikula
2019-01-22 8:23 ` Jani Nikula [this message]
2019-01-22 8:23 ` [PATCH v2 3/7] drm/i915/lvds: nuke intel_lvds_supported() Jani Nikula
2019-01-22 8:23 ` [PATCH v2 4/7] drm/i915/tv: only call intel_tv_init() on platforms that might have TV Jani Nikula
2019-01-22 8:23 ` [PATCH v2 5/7] drm/i915: rename has_edp_a() to ilk_has_edp_a() Jani Nikula
2019-01-23 18:35 ` Ville Syrjälä
2019-01-22 8:23 ` [PATCH v2 6/7] drm/i915/lvds: simplify gen 2 lvds presence Jani Nikula
2019-01-23 18:36 ` Ville Syrjälä
2019-01-22 8:23 ` [PATCH v2 7/7] drm/i915/crt: simplify CRT VBT check on pre-VLV/DDI Jani Nikula
2019-01-23 18:36 ` Ville Syrjälä
2019-01-24 7:40 ` Jani Nikula
2019-01-22 9:01 ` ✓ Fi.CI.BAT: success for series starting with [v2,1/7] drm/i915/crt: split out intel_crt_present() to platform specific setup Patchwork
2019-01-22 9:50 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190122082307.4003-2-jani.nikula@intel.com \
--to=jani.nikula@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox