From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 13/13] drm/i915: Remove the fragile array index -> link rate mapping
Date: Thu, 7 Feb 2019 19:32:30 +0200 [thread overview]
Message-ID: <20190207173230.22368-13-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20190207173230.22368-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Rather than try to maintain some magic relationship between the link
rates and the index into the wrpll params array let's just store
the link rate in the array itself. Much less fragile.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/intel_dpll_mgr.c | 136 +++++++++++++-------------
1 file changed, 68 insertions(+), 68 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index 78dd28aa123c..9aacd19aede1 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -2417,47 +2417,69 @@ static const struct intel_dpll_mgr cnl_pll_mgr = {
.dump_hw_state = cnl_dump_hw_state,
};
+struct icl_combo_pll_params {
+ int clock;
+ struct skl_wrpll_params wrpll;
+};
+
/*
* These values alrea already adjusted: they're the bits we write to the
* registers, not the logical values.
*/
-static const struct skl_wrpll_params icl_dp_combo_pll_24MHz_values[] = {
- { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [0]: 5.4 */
- .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [1]: 2.7 */
- .pdiv = 0x2 /* 3 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [2]: 1.62 */
- .pdiv = 0x4 /* 5 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [3]: 3.24 */
- .pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x168, .dco_fraction = 0x0000, /* [4]: 2.16 */
- .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 1, .qdiv_ratio = 2},
- { .dco_integer = 0x168, .dco_fraction = 0x0000, /* [5]: 4.32 */
- .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x195, .dco_fraction = 0x0000, /* [6]: 6.48 */
- .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [7]: 8.1 */
- .pdiv = 0x1 /* 2 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
+static const struct icl_combo_pll_params icl_dp_combo_pll_24MHz_values[] = {
+ { 540000,
+ { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [0]: 5.4 */
+ .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 270000,
+ { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [1]: 2.7 */
+ .pdiv = 0x2 /* 3 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 162000,
+ { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [2]: 1.62 */
+ .pdiv = 0x4 /* 5 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 324000,
+ { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [3]: 3.24 */
+ .pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 216000,
+ { .dco_integer = 0x168, .dco_fraction = 0x0000, /* [4]: 2.16 */
+ .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 1, .qdiv_ratio = 2, }, },
+ { 432000,
+ { .dco_integer = 0x168, .dco_fraction = 0x0000, /* [5]: 4.32 */
+ .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 648000,
+ { .dco_integer = 0x195, .dco_fraction = 0x0000, /* [6]: 6.48 */
+ .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 810000,
+ { .dco_integer = 0x151, .dco_fraction = 0x4000, /* [7]: 8.1 */
+ .pdiv = 0x1 /* 2 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
};
+
/* Also used for 38.4 MHz values. */
-static const struct skl_wrpll_params icl_dp_combo_pll_19_2MHz_values[] = {
- { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [0]: 5.4 */
- .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [1]: 2.7 */
- .pdiv = 0x2 /* 3 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [2]: 1.62 */
- .pdiv = 0x4 /* 5 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [3]: 3.24 */
- .pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x1C2, .dco_fraction = 0x0000, /* [4]: 2.16 */
- .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 1, .qdiv_ratio = 2},
- { .dco_integer = 0x1C2, .dco_fraction = 0x0000, /* [5]: 4.32 */
- .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x1FA, .dco_fraction = 0x2000, /* [6]: 6.48 */
- .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
- { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [7]: 8.1 */
- .pdiv = 0x1 /* 2 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0},
+static const struct icl_combo_pll_params icl_dp_combo_pll_19_2MHz_values[] = {
+ { 540000,
+ { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [0]: 5.4 */
+ .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 270000,
+ { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [1]: 2.7 */
+ .pdiv = 0x2 /* 3 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 162000,
+ { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [2]: 1.62 */
+ .pdiv = 0x4 /* 5 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 324000,
+ { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [3]: 3.24 */
+ .pdiv = 0x4 /* 5 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 216000,
+ { .dco_integer = 0x1C2, .dco_fraction = 0x0000, /* [4]: 2.16 */
+ .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 1, .qdiv_ratio = 2, }, },
+ { 432000,
+ { .dco_integer = 0x1C2, .dco_fraction = 0x0000, /* [5]: 4.32 */
+ .pdiv = 0x1 /* 2 */, .kdiv = 2, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 648000,
+ { .dco_integer = 0x1FA, .dco_fraction = 0x2000, /* [6]: 6.48 */
+ .pdiv = 0x2 /* 3 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
+ { 810000,
+ { .dco_integer = 0x1A5, .dco_fraction = 0x7000, /* [7]: 8.1 */
+ .pdiv = 0x1 /* 2 */, .kdiv = 1, .qdiv_mode = 0, .qdiv_ratio = 0, }, },
};
static const struct skl_wrpll_params icl_tbt_pll_24MHz_values = {
@@ -2474,44 +2496,22 @@ static bool icl_calc_dp_combo_pll(struct intel_crtc_state *crtc_state,
struct skl_wrpll_params *pll_params)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
- const struct skl_wrpll_params *params;
+ const struct icl_combo_pll_params *params =
+ dev_priv->cdclk.hw.ref == 24000 ?
+ icl_dp_combo_pll_24MHz_values :
+ icl_dp_combo_pll_19_2MHz_values;
int clock = crtc_state->port_clock;
+ int i;
- params = dev_priv->cdclk.hw.ref == 24000 ?
- icl_dp_combo_pll_24MHz_values :
- icl_dp_combo_pll_19_2MHz_values;
-
- switch (clock) {
- case 540000:
- *pll_params = params[0];
- break;
- case 270000:
- *pll_params = params[1];
- break;
- case 162000:
- *pll_params = params[2];
- break;
- case 324000:
- *pll_params = params[3];
- break;
- case 216000:
- *pll_params = params[4];
- break;
- case 432000:
- *pll_params = params[5];
- break;
- case 648000:
- *pll_params = params[6];
- break;
- case 810000:
- *pll_params = params[7];
- break;
- default:
- MISSING_CASE(clock);
- return false;
+ for (i = 0; i < ARRAY_SIZE(icl_dp_combo_pll_24MHz_values); i++) {
+ if (clock == params[i].clock) {
+ *pll_params = params[i].wrpll;
+ return true;
+ }
}
- return true;
+ MISSING_CASE(clock);
+ return false;
}
static bool icl_calc_tbt_pll(struct intel_crtc_state *crtc_state,
--
2.19.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-02-07 17:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-07 17:32 [PATCH 01/13] drm/i915: Don't pass crtc to intel_find_shared_dpll() Ville Syrjala
2019-02-07 17:32 ` [PATCH 02/13] drm/i915: Don't pass crtc to intel_get_shared_dpll() and .get_dpll() Ville Syrjala
2019-02-07 17:32 ` [PATCH 03/13] drm/i915: Pass crtc_state down to skl dpll funcs Ville Syrjala
2019-02-07 17:32 ` [PATCH 04/13] drm/i915: Remove redundant on stack dpll_hw_state from skl_get_dpll() Ville Syrjala
2019-02-07 17:32 ` [PATCH 05/13] drm/i915: Pass crtc_state down to bxt dpll funcs Ville Syrjala
2019-02-07 17:32 ` [PATCH 06/13] drm/i915: Remove redundant on stack dpll_hw_state from bxt_get_dpll() Ville Syrjala
2019-02-07 17:32 ` [PATCH 07/13] drm/i915: Pass crtc_state down to cnl dpll funcs Ville Syrjala
2019-02-07 17:32 ` [PATCH 08/13] drm/i915: Remove redundant on stack dpll_hw_state from cnl_get_dpll() Ville Syrjala
2019-02-07 17:32 ` [PATCH 09/13] drm/i915: Pass crtc_state down to icl dpll funcs Ville Syrjala
2019-02-07 17:32 ` [PATCH 10/13] drm/i915: Remove redundant on stack dpll_hw_state from icl_get_dpll() Ville Syrjala
2019-02-07 17:32 ` [PATCH 11/13] drm/i915: Fix readout for cnl DPLL kdiv==3 Ville Syrjala
2019-02-07 22:48 ` Lucas De Marchi
2019-02-07 17:32 ` [PATCH 12/13] drm/i915: Nuke icl_calc_dp_combo_pll_link() Ville Syrjala
2019-02-07 17:32 ` Ville Syrjala [this message]
2019-02-07 23:11 ` [PATCH 13/13] drm/i915: Remove the fragile array index -> link rate mapping Lucas De Marchi
2019-02-08 12:24 ` Ville Syrjälä
2019-02-07 18:01 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [01/13] drm/i915: Don't pass crtc to intel_find_shared_dpll() Patchwork
2019-02-07 18:19 ` ✓ Fi.CI.BAT: success " Patchwork
2019-02-07 20:47 ` ✓ Fi.CI.IGT: " Patchwork
2019-03-02 0:28 ` [PATCH 01/13] " Lucas De Marchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190207173230.22368-13-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox