From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH v2 3/5] drm/i915/icl: split combo and mg pll disable
Date: Fri, 8 Mar 2019 19:57:25 -0800 [thread overview]
Message-ID: <20190309035727.25389-4-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20190309035727.25389-1-lucas.demarchi@intel.com>
Like was done in the enable case, split the implementation of the
disable for MG and Combo PLLs.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
drivers/gpu/drm/i915/intel_dpll_mgr.c | 30 ++++++++++++++++++++-------
1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c
index f7b618e08cab..7f50769699ab 100644
--- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
@@ -3193,10 +3193,9 @@ static void mg_pll_enable(struct drm_i915_private *dev_priv,
}
static void icl_pll_disable(struct drm_i915_private *dev_priv,
- struct intel_shared_dpll *pll)
+ struct intel_shared_dpll *pll,
+ i915_reg_t enable_reg)
{
- const enum intel_dpll_id id = pll->info->id;
- i915_reg_t enable_reg = icl_pll_id_to_enable_reg(id);
u32 val;
/* The first steps are done by intel_ddi_post_disable(). */
@@ -3213,7 +3212,7 @@ static void icl_pll_disable(struct drm_i915_private *dev_priv,
/* Timeout is actually 1us. */
if (intel_wait_for_register(dev_priv, enable_reg, PLL_LOCK, 0, 1))
- DRM_ERROR("PLL %d locked\n", id);
+ DRM_ERROR("PLL %d locked\n", pll->info->id);
/* DVFS post sequence would be here. See the comment above. */
@@ -3227,7 +3226,24 @@ static void icl_pll_disable(struct drm_i915_private *dev_priv,
*/
if (intel_wait_for_register(dev_priv, enable_reg, PLL_POWER_STATE, 0,
1))
- DRM_ERROR("PLL %d Power not disabled\n", id);
+ DRM_ERROR("PLL %d Power not disabled\n", pll->info->id);
+}
+
+static void combo_pll_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ i915_reg_t enable_reg = icl_pll_id_to_enable_reg(pll->info->id);
+
+ icl_pll_disable(dev_priv, pll, enable_reg);
+}
+
+static void mg_pll_disable(struct drm_i915_private *dev_priv,
+ struct intel_shared_dpll *pll)
+{
+ i915_reg_t enable_reg =
+ MG_PLL_ENABLE(icl_pll_id_to_tc_port(pll->info->id));
+
+ icl_pll_disable(dev_priv, pll, enable_reg);
}
static void icl_dump_hw_state(struct drm_i915_private *dev_priv,
@@ -3254,13 +3270,13 @@ static void icl_dump_hw_state(struct drm_i915_private *dev_priv,
static const struct intel_shared_dpll_funcs icl_pll_funcs = {
.enable = combo_pll_enable,
- .disable = icl_pll_disable,
+ .disable = combo_pll_disable,
.get_hw_state = icl_pll_get_hw_state,
};
static const struct intel_shared_dpll_funcs mg_pll_funcs = {
.enable = mg_pll_enable,
- .disable = icl_pll_disable,
+ .disable = mg_pll_disable,
.get_hw_state = mg_pll_get_hw_state,
};
--
2.20.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-03-09 3:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-09 3:57 [PATCH v2 0/5] drm/i915/icl: split pll functions Lucas De Marchi
2019-03-09 3:57 ` [PATCH v2 1/5] drm/i915/icl: split combo and mg pll enable Lucas De Marchi
2019-03-09 3:57 ` [PATCH v2 2/5] drm/i915/icl: split pll enable in three steps Lucas De Marchi
2019-03-09 3:57 ` Lucas De Marchi [this message]
2019-03-09 3:57 ` [PATCH v2 4/5] drm/i915/icl: split combo and tbt pll funcs Lucas De Marchi
2019-03-09 3:57 ` [PATCH v2 5/5] drm/i915/icl: remove intel_dpll_is_combophy() Lucas De Marchi
2019-03-09 5:03 ` ✓ Fi.CI.BAT: success for drm/i915/icl: split pll functions (rev2) Patchwork
2019-03-09 10:11 ` ✗ Fi.CI.IGT: failure " Patchwork
2019-03-11 16:28 ` [PATCH v2 0/5] drm/i915/icl: split pll functions Ville Syrjälä
2019-03-14 23:13 ` ✓ Fi.CI.BAT: success for drm/i915/icl: split pll functions (rev3) Patchwork
2019-03-15 11:52 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190309035727.25389-4-lucas.demarchi@intel.com \
--to=lucas.demarchi@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox