[PATCH v7 0/4] drm/i915: Ensure minimum CDCLK requirement for audio

[PATCH v7 0/4] drm/i915: Ensure minimum CDCLK requirement for audio

[Imre Deak]

This is v7 of [1]. It fixes the use of the old CDCLK atomic state and
some checkpatch/sparse issues.

[1] https://patchwork.freedesktop.org/series/58132/

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>

Imre Deak (2):
  drm/i915: Save the old CDCLK atomic state
  drm/i915: Remove redundant store of logical CDCLK state

Ville Syrjälä (2):
  drm/i915: Force 2*96 MHz cdclk on glk/cnl when audio power is enabled
  drm/i915: Skip modeset for cdclk changes if possible

 drivers/gpu/drm/i915/i915_drv.h      |   6 +-
 drivers/gpu/drm/i915/i915_reg.h      |   3 +-
 drivers/gpu/drm/i915/intel_audio.c   |  64 ++++++++++-
 drivers/gpu/drm/i915/intel_cdclk.c   | 198 ++++++++++++++++++++++++++---------
 drivers/gpu/drm/i915/intel_display.c |  56 ++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |  21 +++-
 6 files changed, 284 insertions(+), 64 deletions(-)

-- 
2.13.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v7 1/4] drm/i915: Force 2*96 MHz cdclk on glk/cnl when audio power is enabled

[Imre Deak]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

CDCLK has to be at least twice the BLCK regardless of audio. Audio
driver has to probe using this hook and increase the clock even in
absence of any display.

v2: Use atomic refcount for get_power, put_power so that we can
    call each once(Abhay).
v3: Reset power well 2 to avoid any transaction on iDisp link
    during cdclk change(Abhay).
v4: Remove Power well 2 reset workaround(Ville).
v5: Remove unwanted Power well 2 register defined in v4(Abhay).
v6:
- Use a dedicated flag instead of state->modeset for min CDCLK changes
- Make get/put audio power domain symmetric
- Rebased on top of intel_wakeref tracking changes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |  3 ++
 drivers/gpu/drm/i915/intel_audio.c   | 64 ++++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_cdclk.c   | 30 ++++++-----------
 drivers/gpu/drm/i915/intel_display.c |  9 ++++-
 drivers/gpu/drm/i915/intel_drv.h     |  3 ++
 5 files changed, 86 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index c65c2e6649df..6b10cee4e77f 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1624,6 +1624,8 @@ struct drm_i915_private {
 		struct intel_cdclk_state actual;
 		/* The current hardware cdclk state */
 		struct intel_cdclk_state hw;
+
+		int force_min_cdclk;
 	} cdclk;
 
 	/**
@@ -1743,6 +1745,7 @@ struct drm_i915_private {
 	 *
 	 */
 	struct mutex av_mutex;
+	int audio_power_refcount;
 
 	struct {
 		struct mutex mutex;
diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
index 502b57ce72ab..20324b0d34c7 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -741,18 +741,78 @@ void intel_init_audio_hooks(struct drm_i915_private *dev_priv)
 	}
 }
 
+static void glk_force_audio_cdclk(struct drm_i915_private *dev_priv,
+				  bool enable)
+{
+	struct drm_modeset_acquire_ctx ctx;
+	struct drm_atomic_state *state;
+	int ret;
+
+	drm_modeset_acquire_init(&ctx, 0);
+	state = drm_atomic_state_alloc(&dev_priv->drm);
+	if (WARN_ON(!state))
+		return;
+
+	state->acquire_ctx = &ctx;
+
+retry:
+	to_intel_atomic_state(state)->cdclk.force_min_cdclk_changed = true;
+	to_intel_atomic_state(state)->cdclk.force_min_cdclk =
+		enable ? 2 * 96000 : 0;
+
+	/*
+	 * Protects dev_priv->cdclk.force_min_cdclk
+	 * Need to lock this here in case we have no active pipes
+	 * and thus wouldn't lock it during the commit otherwise.
+	 */
+	ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
+			       &ctx);
+	if (!ret)
+		ret = drm_atomic_commit(state);
+
+	if (ret == -EDEADLK) {
+		drm_atomic_state_clear(state);
+		drm_modeset_backoff(&ctx);
+		goto retry;
+	}
+
+	WARN_ON(ret);
+
+	drm_atomic_state_put(state);
+
+	drm_modeset_drop_locks(&ctx);
+	drm_modeset_acquire_fini(&ctx);
+}
+
 static unsigned long i915_audio_component_get_power(struct device *kdev)
 {
+	struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
+	intel_wakeref_t ret;
+
 	/* Catch potential impedance mismatches before they occur! */
 	BUILD_BUG_ON(sizeof(intel_wakeref_t) > sizeof(unsigned long));
 
-	return intel_display_power_get(kdev_to_i915(kdev), POWER_DOMAIN_AUDIO);
+	ret = intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
+
+	/* Force CDCLK to 2*BCLK as long as we need audio to be powered. */
+	if (dev_priv->audio_power_refcount++ == 0)
+		if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
+			glk_force_audio_cdclk(dev_priv, true);
+
+	return ret;
 }
 
 static void i915_audio_component_put_power(struct device *kdev,
 					   unsigned long cookie)
 {
-	intel_display_power_put(kdev_to_i915(kdev), POWER_DOMAIN_AUDIO, cookie);
+	struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
+
+	/* Stop forcing CDCLK to 2*BCLK if no need for audio to be powered. */
+	if (--dev_priv->audio_power_refcount == 0)
+		if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
+			glk_force_audio_cdclk(dev_priv, false);
+
+	intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO, cookie);
 }
 
 static void i915_audio_component_codec_wake_override(struct device *kdev,
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 21fb4e0d6c4e..7dcca84f31d1 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -2187,19 +2187,8 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
 	/*
 	 * According to BSpec, "The CD clock frequency must be at least twice
 	 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
-	 *
-	 * FIXME: Check the actual, not default, BCLK being used.
-	 *
-	 * FIXME: This does not depend on ->has_audio because the higher CDCLK
-	 * is required for audio probe, also when there are no audio capable
-	 * displays connected at probe time. This leads to unnecessarily high
-	 * CDCLK when audio is not required.
-	 *
-	 * FIXME: This limit is only applied when there are displays connected
-	 * at probe time. If we probe without displays, we'll still end up using
-	 * the platform minimum CDCLK, failing audio probe.
 	 */
-	if (INTEL_GEN(dev_priv) >= 9)
+	if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9)
 		min_cdclk = max(2 * 96000, min_cdclk);
 
 	/*
@@ -2239,7 +2228,7 @@ static int intel_compute_min_cdclk(struct drm_atomic_state *state)
 		intel_state->min_cdclk[i] = min_cdclk;
 	}
 
-	min_cdclk = 0;
+	min_cdclk = intel_state->cdclk.force_min_cdclk;
 	for_each_pipe(dev_priv, pipe)
 		min_cdclk = max(intel_state->min_cdclk[pipe], min_cdclk);
 
@@ -2300,7 +2289,8 @@ static int vlv_modeset_calc_cdclk(struct drm_atomic_state *state)
 		vlv_calc_voltage_level(dev_priv, cdclk);
 
 	if (!intel_state->active_crtcs) {
-		cdclk = vlv_calc_cdclk(dev_priv, 0);
+		cdclk = vlv_calc_cdclk(dev_priv,
+				       intel_state->cdclk.force_min_cdclk);
 
 		intel_state->cdclk.actual.cdclk = cdclk;
 		intel_state->cdclk.actual.voltage_level =
@@ -2333,7 +2323,7 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)
 		bdw_calc_voltage_level(cdclk);
 
 	if (!intel_state->active_crtcs) {
-		cdclk = bdw_calc_cdclk(0);
+		cdclk = bdw_calc_cdclk(intel_state->cdclk.force_min_cdclk);
 
 		intel_state->cdclk.actual.cdclk = cdclk;
 		intel_state->cdclk.actual.voltage_level =
@@ -2405,7 +2395,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
 		skl_calc_voltage_level(cdclk);
 
 	if (!intel_state->active_crtcs) {
-		cdclk = skl_calc_cdclk(0, vco);
+		cdclk = skl_calc_cdclk(intel_state->cdclk.force_min_cdclk, vco);
 
 		intel_state->cdclk.actual.vco = vco;
 		intel_state->cdclk.actual.cdclk = cdclk;
@@ -2444,10 +2434,10 @@ static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state)
 
 	if (!intel_state->active_crtcs) {
 		if (IS_GEMINILAKE(dev_priv)) {
-			cdclk = glk_calc_cdclk(0);
+			cdclk = glk_calc_cdclk(intel_state->cdclk.force_min_cdclk);
 			vco = glk_de_pll_vco(dev_priv, cdclk);
 		} else {
-			cdclk = bxt_calc_cdclk(0);
+			cdclk = bxt_calc_cdclk(intel_state->cdclk.force_min_cdclk);
 			vco = bxt_de_pll_vco(dev_priv, cdclk);
 		}
 
@@ -2483,7 +2473,7 @@ static int cnl_modeset_calc_cdclk(struct drm_atomic_state *state)
 		    cnl_compute_min_voltage_level(intel_state));
 
 	if (!intel_state->active_crtcs) {
-		cdclk = cnl_calc_cdclk(0);
+		cdclk = cnl_calc_cdclk(intel_state->cdclk.force_min_cdclk);
 		vco = cnl_cdclk_pll_vco(dev_priv, cdclk);
 
 		intel_state->cdclk.actual.vco = vco;
@@ -2519,7 +2509,7 @@ static int icl_modeset_calc_cdclk(struct drm_atomic_state *state)
 		    cnl_compute_min_voltage_level(intel_state));
 
 	if (!intel_state->active_crtcs) {
-		cdclk = icl_calc_cdclk(0, ref);
+		cdclk = icl_calc_cdclk(intel_state->cdclk.force_min_cdclk, ref);
 		vco = icl_calc_cdclk_pll_vco(dev_priv, cdclk);
 
 		intel_state->cdclk.actual.vco = vco;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 61acbaf2af75..b4199cd53349 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12973,6 +12973,11 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 		return -EINVAL;
 	}
 
+	/* keep the current setting */
+	if (!intel_state->cdclk.force_min_cdclk_changed)
+		intel_state->cdclk.force_min_cdclk =
+			dev_priv->cdclk.force_min_cdclk;
+
 	intel_state->modeset = true;
 	intel_state->active_crtcs = dev_priv->active_crtcs;
 	intel_state->cdclk.logical = dev_priv->cdclk.logical;
@@ -13068,7 +13073,7 @@ static int intel_atomic_check(struct drm_device *dev,
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *old_crtc_state, *crtc_state;
 	int ret, i;
-	bool any_ms = false;
+	bool any_ms = intel_state->cdclk.force_min_cdclk_changed;
 
 	/* Catch I915_MODE_FLAG_INHERITED */
 	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state,
@@ -13660,6 +13665,8 @@ static int intel_atomic_commit(struct drm_device *dev,
 		dev_priv->active_crtcs = intel_state->active_crtcs;
 		dev_priv->cdclk.logical = intel_state->cdclk.logical;
 		dev_priv->cdclk.actual = intel_state->cdclk.actual;
+		dev_priv->cdclk.force_min_cdclk =
+			intel_state->cdclk.force_min_cdclk;
 	}
 
 	drm_atomic_state_get(state);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d9f188ef21f4..0b84e557c267 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -556,6 +556,9 @@ struct intel_atomic_state {
 		 * state only when all crtc's are DPMS off.
 		 */
 		struct intel_cdclk_state actual;
+
+		int force_min_cdclk;
+		bool force_min_cdclk_changed;
 	} cdclk;
 
 	bool dpll_set, modeset;
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v7 2/4] drm/i915: Save the old CDCLK atomic state

[Imre Deak]

The old state will be needed by an upcoming patch to determine if the
commit increases or decreases CDCLK, so move the old state to the atomic
state (while keeping the new one in dev_priv). cdclk.logical and
cdclk.actual in the atomic state isn't used atm anywhere after the
atomic check phase, so this should be safe.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/intel_cdclk.c   | 26 ++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_display.c |  4 ++--
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 3 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 7dcca84f31d1..97007d76f9a7 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -2100,6 +2100,32 @@ bool intel_cdclk_changed(const struct intel_cdclk_state *a,
 		a->voltage_level != b->voltage_level;
 }
 
+/**
+ * intel_cdclk_swap_state - make atomic CDCLK configuration effective
+ * @state: atomic state
+ *
+ * This is the CDCLK version of drm_atomic_helper_swap_state() since the
+ * helper does not handle driver-specific global state.
+ *
+ * Similarly to the atomic helpers this function does a complete swap,
+ * i.e. it also puts the old state into @state. This is used by the commit
+ * code to determine how CDCLK has changed (for instance did it increase or
+ * decrease).
+ */
+void intel_cdclk_swap_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	struct intel_cdclk_state tmp;
+
+	tmp = state->cdclk.logical;
+	state->cdclk.logical = dev_priv->cdclk.logical;
+	dev_priv->cdclk.logical = tmp;
+
+	tmp = state->cdclk.actual;
+	state->cdclk.actual = dev_priv->cdclk.actual;
+	dev_priv->cdclk.actual = tmp;
+}
+
 void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
 			    const char *context)
 {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b4199cd53349..9c4ad124302c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13663,10 +13663,10 @@ static int intel_atomic_commit(struct drm_device *dev,
 		       intel_state->min_voltage_level,
 		       sizeof(intel_state->min_voltage_level));
 		dev_priv->active_crtcs = intel_state->active_crtcs;
-		dev_priv->cdclk.logical = intel_state->cdclk.logical;
-		dev_priv->cdclk.actual = intel_state->cdclk.actual;
 		dev_priv->cdclk.force_min_cdclk =
 			intel_state->cdclk.force_min_cdclk;
+
+		intel_cdclk_swap_state(intel_state);
 	}
 
 	drm_atomic_state_get(state);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 0b84e557c267..85dd6a9d1e42 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1698,6 +1698,7 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
 			       const struct intel_cdclk_state *b);
 bool intel_cdclk_changed(const struct intel_cdclk_state *a,
 			 const struct intel_cdclk_state *b);
+void intel_cdclk_swap_state(struct intel_atomic_state *state);
 void intel_set_cdclk(struct drm_i915_private *dev_priv,
 		     const struct intel_cdclk_state *cdclk_state);
 void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v7 2/4] drm/i915: Save the old CDCLK atomic state

[Ville Syrjälä]

On Tue, Mar 19, 2019 at 08:36:16PM +0200, Imre Deak wrote:
> The old state will be needed by an upcoming patch to determine if the
> commit increases or decreases CDCLK, so move the old state to the atomic
> state (while keeping the new one in dev_priv). cdclk.logical and
> cdclk.actual in the atomic state isn't used atm anywhere after the
> atomic check phase, so this should be safe.
> 
> Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>
> ---
>  drivers/gpu/drm/i915/intel_cdclk.c   | 26 ++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/intel_display.c |  4 ++--
>  drivers/gpu/drm/i915/intel_drv.h     |  1 +
>  3 files changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
> index 7dcca84f31d1..97007d76f9a7 100644
> --- a/drivers/gpu/drm/i915/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> @@ -2100,6 +2100,32 @@ bool intel_cdclk_changed(const struct intel_cdclk_state *a,
>  		a->voltage_level != b->voltage_level;
>  }
>  
> +/**
> + * intel_cdclk_swap_state - make atomic CDCLK configuration effective
> + * @state: atomic state
> + *
> + * This is the CDCLK version of drm_atomic_helper_swap_state() since the
> + * helper does not handle driver-specific global state.
> + *
> + * Similarly to the atomic helpers this function does a complete swap,
> + * i.e. it also puts the old state into @state. This is used by the commit
> + * code to determine how CDCLK has changed (for instance did it increase or
> + * decrease).
> + */
> +void intel_cdclk_swap_state(struct intel_atomic_state *state)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> +	struct intel_cdclk_state tmp;
> +
> +	tmp = state->cdclk.logical;
> +	state->cdclk.logical = dev_priv->cdclk.logical;
> +	dev_priv->cdclk.logical = tmp;
> +
> +	tmp = state->cdclk.actual;
> +	state->cdclk.actual = dev_priv->cdclk.actual;
> +	dev_priv->cdclk.actual = tmp;

No love for swap()?

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> +}
> +
>  void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
>  			    const char *context)
>  {
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index b4199cd53349..9c4ad124302c 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -13663,10 +13663,10 @@ static int intel_atomic_commit(struct drm_device *dev,
>  		       intel_state->min_voltage_level,
>  		       sizeof(intel_state->min_voltage_level));
>  		dev_priv->active_crtcs = intel_state->active_crtcs;
> -		dev_priv->cdclk.logical = intel_state->cdclk.logical;
> -		dev_priv->cdclk.actual = intel_state->cdclk.actual;
>  		dev_priv->cdclk.force_min_cdclk =
>  			intel_state->cdclk.force_min_cdclk;
> +
> +		intel_cdclk_swap_state(intel_state);
>  	}
>  
>  	drm_atomic_state_get(state);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 0b84e557c267..85dd6a9d1e42 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1698,6 +1698,7 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
>  			       const struct intel_cdclk_state *b);
>  bool intel_cdclk_changed(const struct intel_cdclk_state *a,
>  			 const struct intel_cdclk_state *b);
> +void intel_cdclk_swap_state(struct intel_atomic_state *state);
>  void intel_set_cdclk(struct drm_i915_private *dev_priv,
>  		     const struct intel_cdclk_state *cdclk_state);
>  void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
> -- 
> 2.13.2

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v7 2/4] drm/i915: Save the old CDCLK atomic state

[Imre Deak]

On Tue, Mar 19, 2019 at 08:51:25PM +0200, Ville Syrjälä wrote:
> On Tue, Mar 19, 2019 at 08:36:16PM +0200, Imre Deak wrote:
> > The old state will be needed by an upcoming patch to determine if the
> > commit increases or decreases CDCLK, so move the old state to the atomic
> > state (while keeping the new one in dev_priv). cdclk.logical and
> > cdclk.actual in the atomic state isn't used atm anywhere after the
> > atomic check phase, so this should be safe.
> > 
> > Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Signed-off-by: Imre Deak <imre.deak@intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_cdclk.c   | 26 ++++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/intel_display.c |  4 ++--
> >  drivers/gpu/drm/i915/intel_drv.h     |  1 +
> >  3 files changed, 29 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
> > index 7dcca84f31d1..97007d76f9a7 100644
> > --- a/drivers/gpu/drm/i915/intel_cdclk.c
> > +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> > @@ -2100,6 +2100,32 @@ bool intel_cdclk_changed(const struct intel_cdclk_state *a,
> >  		a->voltage_level != b->voltage_level;
> >  }
> >  
> > +/**
> > + * intel_cdclk_swap_state - make atomic CDCLK configuration effective
> > + * @state: atomic state
> > + *
> > + * This is the CDCLK version of drm_atomic_helper_swap_state() since the
> > + * helper does not handle driver-specific global state.
> > + *
> > + * Similarly to the atomic helpers this function does a complete swap,
> > + * i.e. it also puts the old state into @state. This is used by the commit
> > + * code to determine how CDCLK has changed (for instance did it increase or
> > + * decrease).
> > + */
> > +void intel_cdclk_swap_state(struct intel_atomic_state *state)
> > +{
> > +	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > +	struct intel_cdclk_state tmp;
> > +
> > +	tmp = state->cdclk.logical;
> > +	state->cdclk.logical = dev_priv->cdclk.logical;
> > +	dev_priv->cdclk.logical = tmp;
> > +
> > +	tmp = state->cdclk.actual;
> > +	state->cdclk.actual = dev_priv->cdclk.actual;
> > +	dev_priv->cdclk.actual = tmp;
> 
> No love for swap()?

Didn't realize I can also use it for structs.. will fix that.

> 
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> > +}
> > +
> >  void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
> >  			    const char *context)
> >  {
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index b4199cd53349..9c4ad124302c 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -13663,10 +13663,10 @@ static int intel_atomic_commit(struct drm_device *dev,
> >  		       intel_state->min_voltage_level,
> >  		       sizeof(intel_state->min_voltage_level));
> >  		dev_priv->active_crtcs = intel_state->active_crtcs;
> > -		dev_priv->cdclk.logical = intel_state->cdclk.logical;
> > -		dev_priv->cdclk.actual = intel_state->cdclk.actual;
> >  		dev_priv->cdclk.force_min_cdclk =
> >  			intel_state->cdclk.force_min_cdclk;
> > +
> > +		intel_cdclk_swap_state(intel_state);
> >  	}
> >  
> >  	drm_atomic_state_get(state);
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 0b84e557c267..85dd6a9d1e42 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -1698,6 +1698,7 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
> >  			       const struct intel_cdclk_state *b);
> >  bool intel_cdclk_changed(const struct intel_cdclk_state *a,
> >  			 const struct intel_cdclk_state *b);
> > +void intel_cdclk_swap_state(struct intel_atomic_state *state);
> >  void intel_set_cdclk(struct drm_i915_private *dev_priv,
> >  		     const struct intel_cdclk_state *cdclk_state);
> >  void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
> > -- 
> > 2.13.2
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v8 2/4] drm/i915: Save the old CDCLK atomic state

[Imre Deak]

The old state will be needed by an upcoming patch to determine if the
commit increases or decreases CDCLK, so move the old state to the atomic
state (while keeping the new one in dev_priv). cdclk.logical and
cdclk.actual in the atomic state isn't used atm anywhere after the
atomic check phase, so this should be safe.

v2:
- Use swap() instead of opencoding it. (Ville)

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/intel_cdclk.c   | 20 ++++++++++++++++++++
 drivers/gpu/drm/i915/intel_display.c |  4 ++--
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 3 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 7dcca84f31d1..5c25626f8cf0 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -2100,6 +2100,26 @@ bool intel_cdclk_changed(const struct intel_cdclk_state *a,
 		a->voltage_level != b->voltage_level;
 }
 
+/**
+ * intel_cdclk_swap_state - make atomic CDCLK configuration effective
+ * @state: atomic state
+ *
+ * This is the CDCLK version of drm_atomic_helper_swap_state() since the
+ * helper does not handle driver-specific global state.
+ *
+ * Similarly to the atomic helpers this function does a complete swap,
+ * i.e. it also puts the old state into @state. This is used by the commit
+ * code to determine how CDCLK has changed (for instance did it increase or
+ * decrease).
+ */
+void intel_cdclk_swap_state(struct intel_atomic_state *state)
+{
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+
+	swap(state->cdclk.logical, dev_priv->cdclk.logical);
+	swap(state->cdclk.actual, dev_priv->cdclk.actual);
+}
+
 void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
 			    const char *context)
 {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b4199cd53349..9c4ad124302c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13663,10 +13663,10 @@ static int intel_atomic_commit(struct drm_device *dev,
 		       intel_state->min_voltage_level,
 		       sizeof(intel_state->min_voltage_level));
 		dev_priv->active_crtcs = intel_state->active_crtcs;
-		dev_priv->cdclk.logical = intel_state->cdclk.logical;
-		dev_priv->cdclk.actual = intel_state->cdclk.actual;
 		dev_priv->cdclk.force_min_cdclk =
 			intel_state->cdclk.force_min_cdclk;
+
+		intel_cdclk_swap_state(intel_state);
 	}
 
 	drm_atomic_state_get(state);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 0b84e557c267..85dd6a9d1e42 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1698,6 +1698,7 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
 			       const struct intel_cdclk_state *b);
 bool intel_cdclk_changed(const struct intel_cdclk_state *a,
 			 const struct intel_cdclk_state *b);
+void intel_cdclk_swap_state(struct intel_atomic_state *state);
 void intel_set_cdclk(struct drm_i915_private *dev_priv,
 		     const struct intel_cdclk_state *cdclk_state);
 void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v7 3/4] drm/i915: Remove redundant store of logical CDCLK state

[Imre Deak]

We copied the original state into the atomic state already earlier in
the function, so no need to do it a second time.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9c4ad124302c..f7b44773e1e7 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -13031,8 +13031,6 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 		DRM_DEBUG_KMS("New voltage level calculated to be logical %u, actual %u\n",
 			      intel_state->cdclk.logical.voltage_level,
 			      intel_state->cdclk.actual.voltage_level);
-	} else {
-		to_intel_atomic_state(state)->cdclk.logical = dev_priv->cdclk.logical;
 	}
 
 	intel_modeset_clear_plls(state);
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v7 3/4] drm/i915: Remove redundant store of logical CDCLK state

[Ville Syrjälä]

On Tue, Mar 19, 2019 at 08:36:17PM +0200, Imre Deak wrote:
> We copied the original state into the atomic state already earlier in
> the function, so no need to do it a second time.
> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak@intel.com>

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

The rest looks ok to me as well.

> ---
>  drivers/gpu/drm/i915/intel_display.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 9c4ad124302c..f7b44773e1e7 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -13031,8 +13031,6 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
>  		DRM_DEBUG_KMS("New voltage level calculated to be logical %u, actual %u\n",
>  			      intel_state->cdclk.logical.voltage_level,
>  			      intel_state->cdclk.actual.voltage_level);
> -	} else {
> -		to_intel_atomic_state(state)->cdclk.logical = dev_priv->cdclk.logical;
>  	}
>  
>  	intel_modeset_clear_plls(state);
> -- 
> 2.13.2

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v7 4/4] drm/i915: Skip modeset for cdclk changes if possible

[Imre Deak]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

If we have only a single active pipe and the cdclk change only requires
the cd2x divider to be updated bxt+ can do the update with forcing a full
modeset on the pipe. Try to hook that up.

v2:
- Wait for vblank after an optimized CDCLK change.
- Avoid optimization if the pipe needs a modeset (or was disabled).
- Split CDCLK change to a pre/post plane update step.
v3:
- Use correct version of CDCLK state as old state. (Ville)
- Remove unused intel_cdclk_can_skip_modeset()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |   3 +-
 drivers/gpu/drm/i915/i915_reg.h      |   3 +-
 drivers/gpu/drm/i915/intel_cdclk.c   | 142 +++++++++++++++++++++++++++--------
 drivers/gpu/drm/i915/intel_display.c |  41 +++++++++-
 drivers/gpu/drm/i915/intel_drv.h     |  17 ++++-
 5 files changed, 169 insertions(+), 37 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6b10cee4e77f..d8f91525c94c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -277,7 +277,8 @@ struct drm_i915_display_funcs {
 	void (*get_cdclk)(struct drm_i915_private *dev_priv,
 			  struct intel_cdclk_state *cdclk_state);
 	void (*set_cdclk)(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state);
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe);
 	int (*get_fifo_size)(struct drm_i915_private *dev_priv,
 			     enum i9xx_plane_id i9xx_plane);
 	int (*compute_pipe_wm)(struct intel_crtc_state *cstate);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9b69cec21f7b..12b8170ced96 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9521,7 +9521,8 @@ enum skl_power_gate {
 #define  BXT_CDCLK_CD2X_PIPE(pipe)	((pipe) << 20)
 #define  CDCLK_DIVMUX_CD_OVERRIDE	(1 << 19)
 #define  BXT_CDCLK_CD2X_PIPE_NONE	BXT_CDCLK_CD2X_PIPE(3)
-#define  ICL_CDCLK_CD2X_PIPE_NONE	(7 << 19)
+#define  ICL_CDCLK_CD2X_PIPE(pipe)	((pipe) << 19)
+#define  ICL_CDCLK_CD2X_PIPE_NONE	ICL_CDCLK_CD2X_PIPE(7)
 #define  BXT_CDCLK_SSA_PRECHARGE_ENABLE	(1 << 16)
 #define  CDCLK_FREQ_DECIMAL_MASK	(0x7ff)
 
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 97007d76f9a7..068de2d431a8 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -516,7 +516,8 @@ static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
 }
 
 static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	u32 val, cmd = cdclk_state->voltage_level;
@@ -598,7 +599,8 @@ static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
 }
 
 static void chv_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	u32 val, cmd = cdclk_state->voltage_level;
@@ -697,7 +699,8 @@ static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
 }
 
 static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	u32 val;
@@ -987,7 +990,8 @@ static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
 }
 
 static void skl_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	int vco = cdclk_state->vco;
@@ -1158,7 +1162,7 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.cdclk = skl_calc_cdclk(0, cdclk_state.vco);
 	cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
 
-	skl_set_cdclk(dev_priv, &cdclk_state);
+	skl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -1176,7 +1180,7 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
 
-	skl_set_cdclk(dev_priv, &cdclk_state);
+	skl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 static int bxt_calc_cdclk(int min_cdclk)
@@ -1355,7 +1359,8 @@ static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
 }
 
 static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	int vco = cdclk_state->vco;
@@ -1408,11 +1413,10 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 		bxt_de_pll_enable(dev_priv, vco);
 
 	val = divider | skl_cdclk_decimal(cdclk);
-	/*
-	 * FIXME if only the cd2x divider needs changing, it could be done
-	 * without shutting off the pipe (if only one pipe is active).
-	 */
-	val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	if (pipe == INVALID_PIPE)
+		val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	else
+		val |= BXT_CDCLK_CD2X_PIPE(pipe);
 	/*
 	 * Disable SSA Precharge when CD clock frequency < 500 MHz,
 	 * enable otherwise.
@@ -1421,6 +1425,9 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 		val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
 	I915_WRITE(CDCLK_CTL, val);
 
+	if (pipe != INVALID_PIPE)
+		intel_wait_for_vblank(dev_priv, pipe);
+
 	mutex_lock(&dev_priv->pcu_lock);
 	/*
 	 * The timeout isn't specified, the 2ms used here is based on
@@ -1525,7 +1532,7 @@ void bxt_init_cdclk(struct drm_i915_private *dev_priv)
 	}
 	cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
 
-	bxt_set_cdclk(dev_priv, &cdclk_state);
+	bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -1543,7 +1550,7 @@ void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
 
-	bxt_set_cdclk(dev_priv, &cdclk_state);
+	bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 static int cnl_calc_cdclk(int min_cdclk)
@@ -1663,7 +1670,8 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
 }
 
 static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	int vco = cdclk_state->vco;
@@ -1704,13 +1712,15 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
 		cnl_cdclk_pll_enable(dev_priv, vco);
 
 	val = divider | skl_cdclk_decimal(cdclk);
-	/*
-	 * FIXME if only the cd2x divider needs changing, it could be done
-	 * without shutting off the pipe (if only one pipe is active).
-	 */
-	val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	if (pipe == INVALID_PIPE)
+		val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	else
+		val |= BXT_CDCLK_CD2X_PIPE(pipe);
 	I915_WRITE(CDCLK_CTL, val);
 
+	if (pipe != INVALID_PIPE)
+		intel_wait_for_vblank(dev_priv, pipe);
+
 	/* inform PCU of the change */
 	mutex_lock(&dev_priv->pcu_lock);
 	sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
@@ -1847,10 +1857,12 @@ static int icl_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
 }
 
 static void icl_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	unsigned int cdclk = cdclk_state->cdclk;
 	unsigned int vco = cdclk_state->vco;
+	u32 val;
 	int ret;
 
 	mutex_lock(&dev_priv->pcu_lock);
@@ -1872,8 +1884,15 @@ static void icl_set_cdclk(struct drm_i915_private *dev_priv,
 	if (dev_priv->cdclk.hw.vco != vco)
 		cnl_cdclk_pll_enable(dev_priv, vco);
 
-	I915_WRITE(CDCLK_CTL, ICL_CDCLK_CD2X_PIPE_NONE |
-			      skl_cdclk_decimal(cdclk));
+	val = skl_cdclk_decimal(cdclk);
+	if (pipe == INVALID_PIPE)
+		val |= ICL_CDCLK_CD2X_PIPE_NONE;
+	else
+		val |= ICL_CDCLK_CD2X_PIPE(pipe);
+	I915_WRITE(CDCLK_CTL, val);
+
+	if (pipe != INVALID_PIPE)
+		intel_wait_for_vblank(dev_priv, pipe);
 
 	mutex_lock(&dev_priv->pcu_lock);
 	sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
@@ -2002,7 +2021,7 @@ void icl_init_cdclk(struct drm_i915_private *dev_priv)
 	sanitized_state.voltage_level =
 				icl_calc_voltage_level(sanitized_state.cdclk);
 
-	icl_set_cdclk(dev_priv, &sanitized_state);
+	icl_set_cdclk(dev_priv, &sanitized_state, INVALID_PIPE);
 }
 
 /**
@@ -2020,7 +2039,7 @@ void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = icl_calc_voltage_level(cdclk_state.cdclk);
 
-	icl_set_cdclk(dev_priv, &cdclk_state);
+	icl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -2048,7 +2067,7 @@ void cnl_init_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
 	cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
 
-	cnl_set_cdclk(dev_priv, &cdclk_state);
+	cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -2066,7 +2085,7 @@ void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
 
-	cnl_set_cdclk(dev_priv, &cdclk_state);
+	cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -2086,6 +2105,27 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
 }
 
 /**
+ * intel_cdclk_needs_cd2x_update - Determine if two CDCLK states require a cd2x divider update
+ * @a: first CDCLK state
+ * @b: second CDCLK state
+ *
+ * Returns:
+ * True if the CDCLK states require just a cd2x divider update, false if not.
+ */
+bool intel_cdclk_needs_cd2x_update(struct drm_i915_private *dev_priv,
+				   const struct intel_cdclk_state *a,
+				   const struct intel_cdclk_state *b)
+{
+	/* Older hw doesn't have the capability */
+	if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv))
+		return false;
+
+	return a->cdclk != b->cdclk &&
+		a->vco == b->vco &&
+		a->ref == b->ref;
+}
+
+/**
  * intel_cdclk_changed - Determine if two CDCLK states are different
  * @a: first CDCLK state
  * @b: second CDCLK state
@@ -2139,12 +2179,14 @@ void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
  * intel_set_cdclk - Push the CDCLK state to the hardware
  * @dev_priv: i915 device
  * @cdclk_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
  *
  * Program the hardware based on the passed in CDCLK state,
  * if necessary.
  */
-void intel_set_cdclk(struct drm_i915_private *dev_priv,
-		     const struct intel_cdclk_state *cdclk_state)
+static void intel_set_cdclk(struct drm_i915_private *dev_priv,
+			    const struct intel_cdclk_state *cdclk_state,
+			    enum pipe pipe)
 {
 	if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state))
 		return;
@@ -2154,7 +2196,7 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
 
 	intel_dump_cdclk_state(cdclk_state, "Changing CDCLK to");
 
-	dev_priv->display.set_cdclk(dev_priv, cdclk_state);
+	dev_priv->display.set_cdclk(dev_priv, cdclk_state, pipe);
 
 	if (WARN(intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state),
 		 "cdclk state doesn't match!\n")) {
@@ -2163,6 +2205,46 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
 	}
 }
 
+/**
+ * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
+ * @dev_priv: i915 device
+ * @old_state: old CDCLK state
+ * @new_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
+ *
+ * Program the hardware before updating the HW plane state based on the passed
+ * in CDCLK state, if necessary.
+ */
+void
+intel_set_cdclk_pre_plane_update(struct drm_i915_private *dev_priv,
+				 const struct intel_cdclk_state *old_state,
+				 const struct intel_cdclk_state *new_state,
+				 enum pipe pipe)
+{
+	if (pipe == INVALID_PIPE || old_state->cdclk <= new_state->cdclk)
+		intel_set_cdclk(dev_priv, new_state, pipe);
+}
+
+/**
+ * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware
+ * @dev_priv: i915 device
+ * @old_state: old CDCLK state
+ * @new_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
+ *
+ * Program the hardware after updating the HW plane state based on the passed
+ * in CDCLK state, if necessary.
+ */
+void
+intel_set_cdclk_post_plane_update(struct drm_i915_private *dev_priv,
+				  const struct intel_cdclk_state *old_state,
+				  const struct intel_cdclk_state *new_state,
+				  enum pipe pipe)
+{
+	if (pipe != INVALID_PIPE && old_state->cdclk > new_state->cdclk)
+		intel_set_cdclk(dev_priv, new_state, pipe);
+}
+
 static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv,
 				     int pixel_rate)
 {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f7b44773e1e7..d24959d76317 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12982,6 +12982,7 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 	intel_state->active_crtcs = dev_priv->active_crtcs;
 	intel_state->cdclk.logical = dev_priv->cdclk.logical;
 	intel_state->cdclk.actual = dev_priv->cdclk.actual;
+	intel_state->cdclk.pipe = INVALID_PIPE;
 
 	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
 		if (new_crtc_state->active)
@@ -13001,6 +13002,8 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 	 * adjusted_mode bits in the crtc directly.
 	 */
 	if (dev_priv->display.modeset_calc_cdclk) {
+		enum pipe pipe;
+
 		ret = dev_priv->display.modeset_calc_cdclk(state);
 		if (ret < 0)
 			return ret;
@@ -13017,12 +13020,36 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 				return ret;
 		}
 
+		if (is_power_of_2(intel_state->active_crtcs)) {
+			struct drm_crtc *crtc;
+			struct drm_crtc_state *crtc_state;
+
+			pipe = ilog2(intel_state->active_crtcs);
+			crtc = &intel_get_crtc_for_pipe(dev_priv, pipe)->base;
+			crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+			if (crtc_state && needs_modeset(crtc_state))
+				pipe = INVALID_PIPE;
+		} else {
+			pipe = INVALID_PIPE;
+		}
+
 		/* All pipes must be switched off while we change the cdclk. */
-		if (intel_cdclk_needs_modeset(&dev_priv->cdclk.actual,
-					      &intel_state->cdclk.actual)) {
+		if (pipe != INVALID_PIPE &&
+		    intel_cdclk_needs_cd2x_update(dev_priv,
+						  &dev_priv->cdclk.actual,
+						  &intel_state->cdclk.actual)) {
+			ret = intel_lock_all_pipes(state);
+			if (ret < 0)
+				return ret;
+
+			intel_state->cdclk.pipe = pipe;
+		} else if (intel_cdclk_needs_modeset(&dev_priv->cdclk.actual,
+						     &intel_state->cdclk.actual)) {
 			ret = intel_modeset_all_pipes(state);
 			if (ret < 0)
 				return ret;
+
+			intel_state->cdclk.pipe = INVALID_PIPE;
 		}
 
 		DRM_DEBUG_KMS("New cdclk calculated to be logical %u kHz, actual %u kHz\n",
@@ -13431,7 +13458,10 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	if (intel_state->modeset) {
 		drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
 
-		intel_set_cdclk(dev_priv, &dev_priv->cdclk.actual);
+		intel_set_cdclk_pre_plane_update(dev_priv,
+						 &intel_state->cdclk.actual,
+						 &dev_priv->cdclk.actual,
+						 intel_state->cdclk.pipe);
 
 		/*
 		 * SKL workaround: bspec recommends we disable the SAGV when we
@@ -13460,6 +13490,11 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	dev_priv->display.update_crtcs(state);
 
+	intel_set_cdclk_post_plane_update(dev_priv,
+					  &intel_state->cdclk.actual,
+					  &dev_priv->cdclk.actual,
+					  intel_state->cdclk.pipe);
+
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
 	 * already, but still need the state for the delayed optimization. To
 	 * fix this:
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 85dd6a9d1e42..d22a0e92e0d4 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -559,6 +559,8 @@ struct intel_atomic_state {
 
 		int force_min_cdclk;
 		bool force_min_cdclk_changed;
+		/* pipe to which cd2x update is synchronized */
+		enum pipe pipe;
 	} cdclk;
 
 	bool dpll_set, modeset;
@@ -1694,13 +1696,24 @@ void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
 void intel_update_max_cdclk(struct drm_i915_private *dev_priv);
 void intel_update_cdclk(struct drm_i915_private *dev_priv);
 void intel_update_rawclk(struct drm_i915_private *dev_priv);
+bool intel_cdclk_needs_cd2x_update(struct drm_i915_private *dev_priv,
+				   const struct intel_cdclk_state *a,
+				   const struct intel_cdclk_state *b);
 bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
 			       const struct intel_cdclk_state *b);
 bool intel_cdclk_changed(const struct intel_cdclk_state *a,
 			 const struct intel_cdclk_state *b);
 void intel_cdclk_swap_state(struct intel_atomic_state *state);
-void intel_set_cdclk(struct drm_i915_private *dev_priv,
-		     const struct intel_cdclk_state *cdclk_state);
+void
+intel_set_cdclk_pre_plane_update(struct drm_i915_private *dev_priv,
+				 const struct intel_cdclk_state *old_state,
+				 const struct intel_cdclk_state *new_state,
+				 enum pipe pipe);
+void
+intel_set_cdclk_post_plane_update(struct drm_i915_private *dev_priv,
+				  const struct intel_cdclk_state *old_state,
+				  const struct intel_cdclk_state *new_state,
+				  enum pipe pipe);
 void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
 			    const char *context);
 
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[PATCH v8 4/4] drm/i915: Skip modeset for cdclk changes if possible

[Imre Deak]

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

If we have only a single active pipe and the cdclk change only requires
the cd2x divider to be updated bxt+ can do the update with forcing a full
modeset on the pipe. Try to hook that up.

v2:
- Wait for vblank after an optimized CDCLK change.
- Avoid optimization if the pipe needs a modeset (or was disabled).
- Split CDCLK change to a pre/post plane update step.
v3:
- Use correct version of CDCLK state as old state. (Ville)
- Remove unused intel_cdclk_can_skip_modeset()
v4:
- For consistency call intel_set_cdclk_post_plane_update() only during
  modesets (and not fastsets).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |   3 +-
 drivers/gpu/drm/i915/i915_reg.h      |   3 +-
 drivers/gpu/drm/i915/intel_cdclk.c   | 142 +++++++++++++++++++++++++++--------
 drivers/gpu/drm/i915/intel_display.c |  42 ++++++++++-
 drivers/gpu/drm/i915/intel_drv.h     |  17 ++++-
 5 files changed, 170 insertions(+), 37 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6b10cee4e77f..d8f91525c94c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -277,7 +277,8 @@ struct drm_i915_display_funcs {
 	void (*get_cdclk)(struct drm_i915_private *dev_priv,
 			  struct intel_cdclk_state *cdclk_state);
 	void (*set_cdclk)(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state);
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe);
 	int (*get_fifo_size)(struct drm_i915_private *dev_priv,
 			     enum i9xx_plane_id i9xx_plane);
 	int (*compute_pipe_wm)(struct intel_crtc_state *cstate);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9b69cec21f7b..12b8170ced96 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9521,7 +9521,8 @@ enum skl_power_gate {
 #define  BXT_CDCLK_CD2X_PIPE(pipe)	((pipe) << 20)
 #define  CDCLK_DIVMUX_CD_OVERRIDE	(1 << 19)
 #define  BXT_CDCLK_CD2X_PIPE_NONE	BXT_CDCLK_CD2X_PIPE(3)
-#define  ICL_CDCLK_CD2X_PIPE_NONE	(7 << 19)
+#define  ICL_CDCLK_CD2X_PIPE(pipe)	((pipe) << 19)
+#define  ICL_CDCLK_CD2X_PIPE_NONE	ICL_CDCLK_CD2X_PIPE(7)
 #define  BXT_CDCLK_SSA_PRECHARGE_ENABLE	(1 << 16)
 #define  CDCLK_FREQ_DECIMAL_MASK	(0x7ff)
 
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 5c25626f8cf0..48cc42a7ef4f 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -516,7 +516,8 @@ static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
 }
 
 static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	u32 val, cmd = cdclk_state->voltage_level;
@@ -598,7 +599,8 @@ static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
 }
 
 static void chv_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	u32 val, cmd = cdclk_state->voltage_level;
@@ -697,7 +699,8 @@ static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
 }
 
 static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	u32 val;
@@ -987,7 +990,8 @@ static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
 }
 
 static void skl_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	int vco = cdclk_state->vco;
@@ -1158,7 +1162,7 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.cdclk = skl_calc_cdclk(0, cdclk_state.vco);
 	cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
 
-	skl_set_cdclk(dev_priv, &cdclk_state);
+	skl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -1176,7 +1180,7 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
 
-	skl_set_cdclk(dev_priv, &cdclk_state);
+	skl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 static int bxt_calc_cdclk(int min_cdclk)
@@ -1355,7 +1359,8 @@ static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
 }
 
 static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	int vco = cdclk_state->vco;
@@ -1408,11 +1413,10 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 		bxt_de_pll_enable(dev_priv, vco);
 
 	val = divider | skl_cdclk_decimal(cdclk);
-	/*
-	 * FIXME if only the cd2x divider needs changing, it could be done
-	 * without shutting off the pipe (if only one pipe is active).
-	 */
-	val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	if (pipe == INVALID_PIPE)
+		val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	else
+		val |= BXT_CDCLK_CD2X_PIPE(pipe);
 	/*
 	 * Disable SSA Precharge when CD clock frequency < 500 MHz,
 	 * enable otherwise.
@@ -1421,6 +1425,9 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 		val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
 	I915_WRITE(CDCLK_CTL, val);
 
+	if (pipe != INVALID_PIPE)
+		intel_wait_for_vblank(dev_priv, pipe);
+
 	mutex_lock(&dev_priv->pcu_lock);
 	/*
 	 * The timeout isn't specified, the 2ms used here is based on
@@ -1525,7 +1532,7 @@ void bxt_init_cdclk(struct drm_i915_private *dev_priv)
 	}
 	cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
 
-	bxt_set_cdclk(dev_priv, &cdclk_state);
+	bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -1543,7 +1550,7 @@ void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
 
-	bxt_set_cdclk(dev_priv, &cdclk_state);
+	bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 static int cnl_calc_cdclk(int min_cdclk)
@@ -1663,7 +1670,8 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
 }
 
 static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	int cdclk = cdclk_state->cdclk;
 	int vco = cdclk_state->vco;
@@ -1704,13 +1712,15 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
 		cnl_cdclk_pll_enable(dev_priv, vco);
 
 	val = divider | skl_cdclk_decimal(cdclk);
-	/*
-	 * FIXME if only the cd2x divider needs changing, it could be done
-	 * without shutting off the pipe (if only one pipe is active).
-	 */
-	val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	if (pipe == INVALID_PIPE)
+		val |= BXT_CDCLK_CD2X_PIPE_NONE;
+	else
+		val |= BXT_CDCLK_CD2X_PIPE(pipe);
 	I915_WRITE(CDCLK_CTL, val);
 
+	if (pipe != INVALID_PIPE)
+		intel_wait_for_vblank(dev_priv, pipe);
+
 	/* inform PCU of the change */
 	mutex_lock(&dev_priv->pcu_lock);
 	sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
@@ -1847,10 +1857,12 @@ static int icl_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
 }
 
 static void icl_set_cdclk(struct drm_i915_private *dev_priv,
-			  const struct intel_cdclk_state *cdclk_state)
+			  const struct intel_cdclk_state *cdclk_state,
+			  enum pipe pipe)
 {
 	unsigned int cdclk = cdclk_state->cdclk;
 	unsigned int vco = cdclk_state->vco;
+	u32 val;
 	int ret;
 
 	mutex_lock(&dev_priv->pcu_lock);
@@ -1872,8 +1884,15 @@ static void icl_set_cdclk(struct drm_i915_private *dev_priv,
 	if (dev_priv->cdclk.hw.vco != vco)
 		cnl_cdclk_pll_enable(dev_priv, vco);
 
-	I915_WRITE(CDCLK_CTL, ICL_CDCLK_CD2X_PIPE_NONE |
-			      skl_cdclk_decimal(cdclk));
+	val = skl_cdclk_decimal(cdclk);
+	if (pipe == INVALID_PIPE)
+		val |= ICL_CDCLK_CD2X_PIPE_NONE;
+	else
+		val |= ICL_CDCLK_CD2X_PIPE(pipe);
+	I915_WRITE(CDCLK_CTL, val);
+
+	if (pipe != INVALID_PIPE)
+		intel_wait_for_vblank(dev_priv, pipe);
 
 	mutex_lock(&dev_priv->pcu_lock);
 	sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
@@ -2002,7 +2021,7 @@ void icl_init_cdclk(struct drm_i915_private *dev_priv)
 	sanitized_state.voltage_level =
 				icl_calc_voltage_level(sanitized_state.cdclk);
 
-	icl_set_cdclk(dev_priv, &sanitized_state);
+	icl_set_cdclk(dev_priv, &sanitized_state, INVALID_PIPE);
 }
 
 /**
@@ -2020,7 +2039,7 @@ void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = icl_calc_voltage_level(cdclk_state.cdclk);
 
-	icl_set_cdclk(dev_priv, &cdclk_state);
+	icl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -2048,7 +2067,7 @@ void cnl_init_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
 	cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
 
-	cnl_set_cdclk(dev_priv, &cdclk_state);
+	cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -2066,7 +2085,7 @@ void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
 	cdclk_state.vco = 0;
 	cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
 
-	cnl_set_cdclk(dev_priv, &cdclk_state);
+	cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
 }
 
 /**
@@ -2086,6 +2105,27 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
 }
 
 /**
+ * intel_cdclk_needs_cd2x_update - Determine if two CDCLK states require a cd2x divider update
+ * @a: first CDCLK state
+ * @b: second CDCLK state
+ *
+ * Returns:
+ * True if the CDCLK states require just a cd2x divider update, false if not.
+ */
+bool intel_cdclk_needs_cd2x_update(struct drm_i915_private *dev_priv,
+				   const struct intel_cdclk_state *a,
+				   const struct intel_cdclk_state *b)
+{
+	/* Older hw doesn't have the capability */
+	if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv))
+		return false;
+
+	return a->cdclk != b->cdclk &&
+		a->vco == b->vco &&
+		a->ref == b->ref;
+}
+
+/**
  * intel_cdclk_changed - Determine if two CDCLK states are different
  * @a: first CDCLK state
  * @b: second CDCLK state
@@ -2133,12 +2173,14 @@ void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
  * intel_set_cdclk - Push the CDCLK state to the hardware
  * @dev_priv: i915 device
  * @cdclk_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
  *
  * Program the hardware based on the passed in CDCLK state,
  * if necessary.
  */
-void intel_set_cdclk(struct drm_i915_private *dev_priv,
-		     const struct intel_cdclk_state *cdclk_state)
+static void intel_set_cdclk(struct drm_i915_private *dev_priv,
+			    const struct intel_cdclk_state *cdclk_state,
+			    enum pipe pipe)
 {
 	if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state))
 		return;
@@ -2148,7 +2190,7 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
 
 	intel_dump_cdclk_state(cdclk_state, "Changing CDCLK to");
 
-	dev_priv->display.set_cdclk(dev_priv, cdclk_state);
+	dev_priv->display.set_cdclk(dev_priv, cdclk_state, pipe);
 
 	if (WARN(intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state),
 		 "cdclk state doesn't match!\n")) {
@@ -2157,6 +2199,46 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
 	}
 }
 
+/**
+ * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
+ * @dev_priv: i915 device
+ * @old_state: old CDCLK state
+ * @new_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
+ *
+ * Program the hardware before updating the HW plane state based on the passed
+ * in CDCLK state, if necessary.
+ */
+void
+intel_set_cdclk_pre_plane_update(struct drm_i915_private *dev_priv,
+				 const struct intel_cdclk_state *old_state,
+				 const struct intel_cdclk_state *new_state,
+				 enum pipe pipe)
+{
+	if (pipe == INVALID_PIPE || old_state->cdclk <= new_state->cdclk)
+		intel_set_cdclk(dev_priv, new_state, pipe);
+}
+
+/**
+ * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware
+ * @dev_priv: i915 device
+ * @old_state: old CDCLK state
+ * @new_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
+ *
+ * Program the hardware after updating the HW plane state based on the passed
+ * in CDCLK state, if necessary.
+ */
+void
+intel_set_cdclk_post_plane_update(struct drm_i915_private *dev_priv,
+				  const struct intel_cdclk_state *old_state,
+				  const struct intel_cdclk_state *new_state,
+				  enum pipe pipe)
+{
+	if (pipe != INVALID_PIPE && old_state->cdclk > new_state->cdclk)
+		intel_set_cdclk(dev_priv, new_state, pipe);
+}
+
 static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv,
 				     int pixel_rate)
 {
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f7b44773e1e7..bcec03f43d3a 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12982,6 +12982,7 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 	intel_state->active_crtcs = dev_priv->active_crtcs;
 	intel_state->cdclk.logical = dev_priv->cdclk.logical;
 	intel_state->cdclk.actual = dev_priv->cdclk.actual;
+	intel_state->cdclk.pipe = INVALID_PIPE;
 
 	for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
 		if (new_crtc_state->active)
@@ -13001,6 +13002,8 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 	 * adjusted_mode bits in the crtc directly.
 	 */
 	if (dev_priv->display.modeset_calc_cdclk) {
+		enum pipe pipe;
+
 		ret = dev_priv->display.modeset_calc_cdclk(state);
 		if (ret < 0)
 			return ret;
@@ -13017,12 +13020,36 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
 				return ret;
 		}
 
+		if (is_power_of_2(intel_state->active_crtcs)) {
+			struct drm_crtc *crtc;
+			struct drm_crtc_state *crtc_state;
+
+			pipe = ilog2(intel_state->active_crtcs);
+			crtc = &intel_get_crtc_for_pipe(dev_priv, pipe)->base;
+			crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+			if (crtc_state && needs_modeset(crtc_state))
+				pipe = INVALID_PIPE;
+		} else {
+			pipe = INVALID_PIPE;
+		}
+
 		/* All pipes must be switched off while we change the cdclk. */
-		if (intel_cdclk_needs_modeset(&dev_priv->cdclk.actual,
-					      &intel_state->cdclk.actual)) {
+		if (pipe != INVALID_PIPE &&
+		    intel_cdclk_needs_cd2x_update(dev_priv,
+						  &dev_priv->cdclk.actual,
+						  &intel_state->cdclk.actual)) {
+			ret = intel_lock_all_pipes(state);
+			if (ret < 0)
+				return ret;
+
+			intel_state->cdclk.pipe = pipe;
+		} else if (intel_cdclk_needs_modeset(&dev_priv->cdclk.actual,
+						     &intel_state->cdclk.actual)) {
 			ret = intel_modeset_all_pipes(state);
 			if (ret < 0)
 				return ret;
+
+			intel_state->cdclk.pipe = INVALID_PIPE;
 		}
 
 		DRM_DEBUG_KMS("New cdclk calculated to be logical %u kHz, actual %u kHz\n",
@@ -13431,7 +13458,10 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	if (intel_state->modeset) {
 		drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
 
-		intel_set_cdclk(dev_priv, &dev_priv->cdclk.actual);
+		intel_set_cdclk_pre_plane_update(dev_priv,
+						 &intel_state->cdclk.actual,
+						 &dev_priv->cdclk.actual,
+						 intel_state->cdclk.pipe);
 
 		/*
 		 * SKL workaround: bspec recommends we disable the SAGV when we
@@ -13460,6 +13490,12 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
 	dev_priv->display.update_crtcs(state);
 
+	if (intel_state->modeset)
+		intel_set_cdclk_post_plane_update(dev_priv,
+						  &intel_state->cdclk.actual,
+						  &dev_priv->cdclk.actual,
+						  intel_state->cdclk.pipe);
+
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
 	 * already, but still need the state for the delayed optimization. To
 	 * fix this:
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 85dd6a9d1e42..d22a0e92e0d4 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -559,6 +559,8 @@ struct intel_atomic_state {
 
 		int force_min_cdclk;
 		bool force_min_cdclk_changed;
+		/* pipe to which cd2x update is synchronized */
+		enum pipe pipe;
 	} cdclk;
 
 	bool dpll_set, modeset;
@@ -1694,13 +1696,24 @@ void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
 void intel_update_max_cdclk(struct drm_i915_private *dev_priv);
 void intel_update_cdclk(struct drm_i915_private *dev_priv);
 void intel_update_rawclk(struct drm_i915_private *dev_priv);
+bool intel_cdclk_needs_cd2x_update(struct drm_i915_private *dev_priv,
+				   const struct intel_cdclk_state *a,
+				   const struct intel_cdclk_state *b);
 bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
 			       const struct intel_cdclk_state *b);
 bool intel_cdclk_changed(const struct intel_cdclk_state *a,
 			 const struct intel_cdclk_state *b);
 void intel_cdclk_swap_state(struct intel_atomic_state *state);
-void intel_set_cdclk(struct drm_i915_private *dev_priv,
-		     const struct intel_cdclk_state *cdclk_state);
+void
+intel_set_cdclk_pre_plane_update(struct drm_i915_private *dev_priv,
+				 const struct intel_cdclk_state *old_state,
+				 const struct intel_cdclk_state *new_state,
+				 enum pipe pipe);
+void
+intel_set_cdclk_post_plane_update(struct drm_i915_private *dev_priv,
+				  const struct intel_cdclk_state *old_state,
+				  const struct intel_cdclk_state *new_state,
+				  enum pipe pipe);
 void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
 			    const char *context);
 
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH v7 4/4] drm/i915: Skip modeset for cdclk changes if possible

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 26014 bytes --]

Hi Imre,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on drm-intel/for-linux-next]
[also build test WARNING on next-20190320]
[cannot apply to v5.1-rc1]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Imre-Deak/drm-i915-Ensure-minimum-CDCLK-requirement-for-audio/20190320-130829
base:   git://anongit.freedesktop.org/drm-intel for-linux-next
reproduce: make htmldocs

All warnings (new ones prefixed by >>):

   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.last_rate' not described in 'sta_info'
   net/mac80211/sta_info.h:590: warning: Function parameter or member 'tx_stats.msdu' not described in 'sta_info'
   kernel/rcu/tree.c:711: warning: Excess function parameter 'irq' description in 'rcu_nmi_exit'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_excl.active' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.cb' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.poll' not described in 'dma_buf'
   include/linux/dma-buf.h:304: warning: Function parameter or member 'cb_shared.active' not described in 'dma_buf'
   include/linux/firmware/intel/stratix10-svc-client.h:1: warning: no structured comments found
   include/linux/gpio/driver.h:371: warning: Function parameter or member 'init_valid_mask' not described in 'gpio_chip'
   include/linux/iio/hw-consumer.h:1: warning: no structured comments found
   include/linux/input/sparse-keymap.h:46: warning: Function parameter or member 'sw' not described in 'key_entry'
   include/linux/regulator/machine.h:199: warning: Function parameter or member 'max_uV_step' not described in 'regulation_constraints'
   include/linux/regulator/driver.h:228: warning: Function parameter or member 'resume' not described in 'regulator_ops'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw0' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw1' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw2' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.esw3' not described in 'irb'
   arch/s390/include/asm/cio.h:245: warning: Function parameter or member 'esw.eadm' not described in 'irb'
   drivers/slimbus/stream.c:1: warning: no structured comments found
   include/linux/spi/spi.h:180: warning: Function parameter or member 'driver_override' not described in 'spi_device'
   drivers/target/target_core_device.c:1: warning: no structured comments found
   drivers/usb/typec/bus.c:1: warning: no structured comments found
   drivers/usb/typec/class.c:1: warning: no structured comments found
   include/linux/w1.h:281: warning: Function parameter or member 'of_match_table' not described in 'w1_family'
   fs/direct-io.c:257: warning: Excess function parameter 'offset' description in 'dio_complete'
   fs/file_table.c:1: warning: no structured comments found
   fs/libfs.c:477: warning: Excess function parameter 'available' description in 'simple_write_end'
   fs/posix_acl.c:646: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode'
   fs/posix_acl.c:646: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:294: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:343: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:183: warning: Function parameter or member 'blockable' not described in 'amdgpu_mn_read_lock'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:295: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_start_hsa'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Function parameter or member 'range' not described in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'mm' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'start' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c:344: warning: Excess function parameter 'end' description in 'amdgpu_mn_invalidate_range_end'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:374: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:375: warning: cannot understand function prototype: 'struct amdgpu_vm_pt_cursor '
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:547: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:547: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:547: warning: Function parameter or member 'start' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:547: warning: Function parameter or member 'end' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:547: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_leaf'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:595: warning: Function parameter or member 'adev' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:595: warning: Function parameter or member 'vm' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:595: warning: Function parameter or member 'cursor' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:595: warning: Function parameter or member 'entry' not described in 'for_each_amdgpu_vm_pt_dfs_safe'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:866: warning: Function parameter or member 'level' not described in 'amdgpu_vm_bo_param'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1346: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1346: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1346: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1346: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1346: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1346: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1346: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_func'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'params' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'bo' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'level' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'pe' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'addr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'count' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'incr' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1514: warning: Function parameter or member 'flags' not described in 'amdgpu_vm_update_flags'
   drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:3104: warning: Function parameter or member 'pasid' not described in 'amdgpu_vm_make_compute'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:375: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:376: warning: Function parameter or member 'ih' not described in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c:376: warning: Excess function parameter 'entry' description in 'amdgpu_irq_dispatch'
   drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:1: warning: no structured comments found
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:128: warning: Incorrect use of kernel-doc format: Documentation Makefile include scripts source @atomic_obj
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'atomic_obj_lock' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_link' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'backlight_caps' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'freesync_module' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'fw_dmcu' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:203: warning: Function parameter or member 'dmcu_fw_version' not described in 'amdgpu_display_manager'
   drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1: warning: no structured comments found
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_pin' not described in 'drm_driver'
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_unpin' not described in 'drm_driver'
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_res_obj' not described in 'drm_driver'
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_get_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_import_sg_table' not described in 'drm_driver'
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_vmap' not described in 'drm_driver'
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_vunmap' not described in 'drm_driver'
   include/drm/drm_drv.h:715: warning: Function parameter or member 'gem_prime_mmap' not described in 'drm_driver'
   include/drm/drm_atomic_state_helper.h:1: warning: no structured comments found
   drivers/gpu/drm/scheduler/sched_main.c:376: warning: Excess function parameter 'bad' description in 'drm_sched_stop'
   drivers/gpu/drm/scheduler/sched_main.c:377: warning: Excess function parameter 'bad' description in 'drm_sched_stop'
   drivers/gpu/drm/scheduler/sched_main.c:420: warning: Function parameter or member 'full_recovery' not described in 'drm_sched_start'
>> drivers/gpu/drm/i915/intel_cdclk.c:2119: warning: Function parameter or member 'dev_priv' not described in 'intel_cdclk_needs_cd2x_update'
   drivers/gpu/drm/i915/i915_vma.h:50: warning: cannot understand function prototype: 'struct i915_vma '
   drivers/gpu/drm/i915/i915_vma.h:1: warning: no structured comments found
   drivers/gpu/drm/i915/intel_guc_fwif.h:536: warning: cannot understand function prototype: 'struct guc_log_buffer_state '
   drivers/gpu/drm/i915/i915_trace.h:1: warning: no structured comments found
   drivers/gpu/drm/i915/i915_reg.h:156: warning: bad line:
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:126: warning: Function parameter or member 'hw_id' not described in 'komeda_component'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:126: warning: Function parameter or member 'max_active_outputs' not described in 'komeda_component'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:126: warning: Function parameter or member 'supported_outputs' not described in 'komeda_component'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:142: warning: Function parameter or member 'output_port' not described in 'komeda_component_output'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:196: warning: Function parameter or member 'component' not described in 'komeda_component_state'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:196: warning: Function parameter or member 'crtc' not described in 'komeda_component_state'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:196: warning: Function parameter or member 'plane' not described in 'komeda_component_state'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:196: warning: Function parameter or member 'wb_conn' not described in 'komeda_component_state'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:196: warning: Function parameter or member 'changed_active_inputs' not described in 'komeda_component_state'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:196: warning: Function parameter or member 'affected_inputs' not described in 'komeda_component_state'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'n_layers' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'layers' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'n_scalers' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'scalers' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'compiz' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'wb_layer' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'improc' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'ctrlr' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:300: warning: Function parameter or member 'funcs' not described in 'komeda_pipeline'
   drivers/gpu/drm/arm/display/komeda/komeda_pipeline.h:321: warning: Function parameter or member 'pipe' not described in 'komeda_pipeline_state'
   drivers/gpu/drm/arm/display/komeda/komeda_dev.h:97: warning: Function parameter or member 'dev' not described in 'komeda_dev'
   drivers/gpu/drm/arm/display/komeda/komeda_dev.h:97: warning: Function parameter or member 'reg_base' not described in 'komeda_dev'
   drivers/gpu/drm/arm/display/komeda/komeda_dev.h:97: warning: Function parameter or member 'chip' not described in 'komeda_dev'
   drivers/gpu/drm/arm/display/komeda/komeda_dev.h:97: warning: Function parameter or member 'mclk' not described in 'komeda_dev'
   drivers/gpu/drm/arm/display/komeda/komeda_dev.h:97: warning: Function parameter or member 'n_pipelines' not described in 'komeda_dev'
   drivers/gpu/drm/arm/display/komeda/komeda_dev.h:97: warning: Function parameter or member 'pipelines' not described in 'komeda_dev'
   drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.h:1: warning: no structured comments found
   drivers/gpu/drm/arm/display/komeda/komeda_crtc.c:1: warning: no structured comments found
   drivers/gpu/drm/arm/display/komeda/komeda_plane.c:1: warning: no structured comments found
   include/linux/skbuff.h:876: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'list' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
   include/linux/skbuff.h:876: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
   include/net/sock.h:238: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
   include/net/sock.h:238: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
   include/net/sock.h:513: warning: Function parameter or member 'sk_backlog.rmem_alloc' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'sk_backlog.len' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'sk_backlog.head' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'sk_backlog.tail' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
   include/net/sock.h:513: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'adj_list.upper' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'adj_list.lower' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'gso_partial_features' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'switchdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'name_assign_type' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'mpls_ptr' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'xdp_prog' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'nf_hooks_ingress' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member '____cacheline_aligned_in_smp' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'qdisc_hash' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device'
   include/linux/netdevice.h:2051: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising' not described in 'phylink_link_state'
   include/linux/phylink.h:56: warning: Function parameter or member '__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising' not described in 'phylink_link_state'
   Documentation/admin-guide/cgroup-v2.rst:1509: WARNING: Block quote ends without a blank line; unexpected unindent.
   Documentation/admin-guide/cgroup-v2.rst:1511: WARNING: Block quote ends without a blank line; unexpected unindent.
   Documentation/admin-guide/cgroup-v2.rst:1512: WARNING: Block quote ends without a blank line; unexpected unindent.
   include/linux/interrupt.h:252: WARNING: Inline emphasis start-string without end-string.
   include/net/mac80211.h:1214: ERROR: Unexpected indentation.
   include/net/mac80211.h:1221: WARNING: Block quote ends without a blank line; unexpected unindent.
   include/linux/wait.h:110: WARNING: Block quote ends without a blank line; unexpected unindent.
   include/linux/wait.h:113: ERROR: Unexpected indentation.

vim +2119 drivers/gpu/drm/i915/intel_cdclk.c

  2106	
  2107	/**
  2108	 * intel_cdclk_needs_cd2x_update - Determine if two CDCLK states require a cd2x divider update
  2109	 * @a: first CDCLK state
  2110	 * @b: second CDCLK state
  2111	 *
  2112	 * Returns:
  2113	 * True if the CDCLK states require just a cd2x divider update, false if not.
  2114	 */
  2115	bool intel_cdclk_needs_cd2x_update(struct drm_i915_private *dev_priv,
  2116					   const struct intel_cdclk_state *a,
  2117					   const struct intel_cdclk_state *b)
  2118	{
> 2119		/* Older hw doesn't have the capability */
  2120		if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv))
  2121			return false;
  2122	
  2123		return a->cdclk != b->cdclk &&
  2124			a->vco == b->vco &&
  2125			a->ref == b->ref;
  2126	}
  2127	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 6597 bytes --]

[-- Attachment #3: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.SPARSE: warning for drm/i915: Ensure minimum CDCLK requirement for audio (rev2)

[Patchwork]

== Series Details ==

Series: drm/i915: Ensure minimum CDCLK requirement for audio (rev2)
URL   : https://patchwork.freedesktop.org/series/58132/
State : warning

== Summary ==

$ dim sparse origin/drm-tip
Sparse version: v0.5.2
Commit: drm/i915: Force 2*96 MHz cdclk on glk/cnl when audio power is enabled
-O:drivers/gpu/drm/i915/intel_cdclk.c:2203:29: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/intel_cdclk.c:2192:29: warning: expression using sizeof(void)
-O:drivers/gpu/drm/i915/intel_cdclk.c:2244:29: warning: expression using sizeof(void)
-O:drivers/gpu/drm/i915/intel_cdclk.c:2244:29: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/intel_cdclk.c:2233:29: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/intel_cdclk.c:2233:29: warning: expression using sizeof(void)
-drivers/gpu/drm/i915/selftests/../i915_drv.h:3558:16: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/selftests/../i915_drv.h:3561:16: warning: expression using sizeof(void)

Commit: drm/i915: Save the old CDCLK atomic state
Okay!

Commit: drm/i915: Remove redundant store of logical CDCLK state
Okay!

Commit: drm/i915: Skip modeset for cdclk changes if possible
-drivers/gpu/drm/i915/selftests/../i915_drv.h:3561:16: warning: expression using sizeof(void)
+drivers/gpu/drm/i915/selftests/../i915_drv.h:3562:16: warning: expression using sizeof(void)

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.BAT: success for drm/i915: Ensure minimum CDCLK requirement for audio (rev2)

[Patchwork]

== Series Details ==

Series: drm/i915: Ensure minimum CDCLK requirement for audio (rev2)
URL   : https://patchwork.freedesktop.org/series/58132/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5774 -> Patchwork_12518
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/58132/revisions/2/mbox/

Known issues
------------

  Here are the changes found in Patchwork_12518 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@amdgpu/amd_cs_nop@sync-fork-compute0:
    - fi-icl-u3:          NOTRUN -> SKIP [fdo#109315] +17

  * igt@gem_ctx_create@basic-files:
    - fi-gdg-551:         NOTRUN -> SKIP [fdo#109271] +106

  * igt@gem_exec_basic@gtt-bsd1:
    - fi-icl-u3:          NOTRUN -> SKIP [fdo#109276] +7

  * igt@gem_exec_basic@gtt-bsd2:
    - fi-byt-clapper:     NOTRUN -> SKIP [fdo#109271] +57

  * igt@gem_exec_parse@basic-rejected:
    - fi-icl-u3:          NOTRUN -> SKIP [fdo#109289] +1

  * igt@gem_exec_suspend@basic-s3:
    - fi-blb-e6850:       PASS -> INCOMPLETE [fdo#107718]

  * igt@i915_selftest@live_contexts:
    - fi-icl-u3:          NOTRUN -> DMESG-FAIL [fdo#108569]

  * igt@kms_addfb_basic@addfb25-y-tiled-small:
    - fi-byt-n2820:       NOTRUN -> SKIP [fdo#109271] +56

  * igt@kms_busy@basic-flip-a:
    - fi-gdg-551:         NOTRUN -> FAIL [fdo#103182]

  * igt@kms_busy@basic-flip-c:
    - fi-byt-clapper:     NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
    - fi-gdg-551:         NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
    - fi-byt-n2820:       NOTRUN -> SKIP [fdo#109271] / [fdo#109278]

  * igt@kms_chamelium@hdmi-edid-read:
    - fi-icl-u3:          NOTRUN -> SKIP [fdo#109284] +8

  * igt@kms_force_connector_basic@force-load-detect:
    - fi-bxt-j4205:       NOTRUN -> SKIP [fdo#109271] +47

  * igt@kms_force_connector_basic@prune-stale-modes:
    - fi-icl-u3:          NOTRUN -> SKIP [fdo#109285] +3

  * igt@kms_frontbuffer_tracking@basic:
    - fi-icl-u3:          NOTRUN -> FAIL [fdo#103167]
    - fi-byt-clapper:     NOTRUN -> FAIL [fdo#103167]

  * igt@kms_pipe_crc_basic@hang-read-crc-pipe-a:
    - fi-byt-clapper:     NOTRUN -> FAIL [fdo#103191] / [fdo#107362] +1

  
#### Possible fixes ####

  * igt@i915_selftest@live_execlists:
    - fi-apl-guc:         INCOMPLETE [fdo#103927] / [fdo#109720] -> PASS

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
  [fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
  [fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
  [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
  [fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
  [fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
  [fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
  [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
  [fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
  [fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
  [fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
  [fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
  [fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720


Participating hosts (41 -> 41)
------------------------------

  Additional (6): fi-bxt-j4205 fi-gdg-551 fi-icl-u3 fi-skl-lmem fi-byt-n2820 fi-byt-clapper 
  Missing    (6): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-ctg-p8600 fi-icl-y fi-bdw-samus 


Build changes
-------------

    * Linux: CI_DRM_5774 -> Patchwork_12518

  CI_DRM_5774: eb58badf383e72d54ba48b8570ce7169c1419f6a @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4890: 6d4d6949a099521003de252358601d22115e27ef @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_12518: 113c6307137d16b5c2a1edbcc6607687a09c021b @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

113c6307137d drm/i915: Skip modeset for cdclk changes if possible
9afcd81c1c2d drm/i915: Remove redundant store of logical CDCLK state
f9b46b4a773c drm/i915: Save the old CDCLK atomic state
99e41d69499b drm/i915: Force 2*96 MHz cdclk on glk/cnl when audio power is enabled

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12518/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✓ Fi.CI.IGT: success for drm/i915: Ensure minimum CDCLK requirement for audio (rev2)

[Patchwork]

== Series Details ==

Series: drm/i915: Ensure minimum CDCLK requirement for audio (rev2)
URL   : https://patchwork.freedesktop.org/series/58132/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5774_full -> Patchwork_12518_full
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Possible new issues
-------------------

  Here are the unknown changes that may have been introduced in Patchwork_12518_full:

### IGT changes ###

#### Suppressed ####

  The following results come from untrusted machines, tests, or statuses.
  They do not affect the overall result.

  * {igt@gem_mocs_settings@mocs-isolation-bsd2}:
    - shard-skl:          NOTRUN -> FAIL

  
Known issues
------------

  Here are the changes found in Patchwork_12518_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_ctx_param@invalid-param-get:
    - shard-skl:          NOTRUN -> FAIL [fdo#109559]

  * igt@gem_exec_big:
    - shard-hsw:          PASS -> TIMEOUT [fdo#107936]

  * igt@gem_exec_schedule@preempt-bsd2:
    - shard-apl:          NOTRUN -> SKIP [fdo#109271] +1

  * igt@gem_exec_schedule@reorder-wide-bsd1:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109276] +8

  * igt@gem_exec_schedule@wide-vebox:
    - shard-iclb:         PASS -> FAIL [fdo#109633]

  * igt@i915_missed_irq:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109503]

  * igt@i915_pm_rc6_residency@media-rc6-accuracy:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109289]

  * igt@kms_atomic_transition@6x-modeset-transitions-nonblocking-fencing:
    - shard-kbl:          NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +6

  * igt@kms_busy@basic-modeset-d:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109278]

  * igt@kms_busy@extended-modeset-hang-newfb-render-a:
    - shard-skl:          NOTRUN -> DMESG-WARN [fdo#107956] +2

  * igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
    - shard-glk:          PASS -> FAIL [fdo#108145]

  * igt@kms_chamelium@vga-hpd-without-ddc:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109284] +1

  * igt@kms_color@pipe-b-gamma:
    - shard-iclb:         NOTRUN -> FAIL [fdo#104782] +1

  * igt@kms_content_protection@atomic-dpms:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109300]

  * igt@kms_content_protection@legacy:
    - shard-kbl:          NOTRUN -> FAIL [fdo#108597] / [fdo#108739]

  * igt@kms_cursor_crc@cursor-128x42-onscreen:
    - shard-apl:          PASS -> FAIL [fdo#103232]

  * igt@kms_cursor_crc@cursor-256x256-suspend:
    - shard-apl:          PASS -> FAIL [fdo#103191] / [fdo#103232]

  * igt@kms_cursor_crc@cursor-256x85-sliding:
    - shard-kbl:          NOTRUN -> FAIL [fdo#103232] +1

  * igt@kms_cursor_crc@cursor-512x512-onscreen:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109279]

  * igt@kms_cursor_crc@cursor-64x64-offscreen:
    - shard-hsw:          PASS -> INCOMPLETE [fdo#103540]

  * igt@kms_cursor_legacy@2x-cursor-vs-flip-atomic:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109274] +4

  * igt@kms_draw_crc@draw-method-xrgb2101010-mmap-gtt-xtiled:
    - shard-skl:          PASS -> FAIL [fdo#103184]

  * igt@kms_fbcon_fbt@fbc:
    - shard-iclb:         PASS -> DMESG-WARN [fdo#109593]

  * igt@kms_flip@modeset-vs-vblank-race-interruptible:
    - shard-glk:          PASS -> FAIL [fdo#103060]

  * igt@kms_frontbuffer_tracking@fbc-1p-offscren-pri-indfb-draw-blt:
    - shard-iclb:         NOTRUN -> FAIL [fdo#103167]

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
    - shard-skl:          NOTRUN -> FAIL [fdo#103167] +1

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-wc:
    - shard-glk:          PASS -> FAIL [fdo#103167]

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
    - shard-apl:          PASS -> FAIL [fdo#103167] +3

  * igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-move:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109280] +7

  * igt@kms_frontbuffer_tracking@fbc-stridechange:
    - shard-skl:          NOTRUN -> FAIL [fdo#105683]

  * igt@kms_frontbuffer_tracking@fbcpsr-1p-offscren-pri-indfb-draw-pwrite:
    - shard-iclb:         PASS -> FAIL [fdo#109247] +16

  * igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-indfb-draw-blt:
    - shard-iclb:         PASS -> FAIL [fdo#103167] +4

  * igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-draw-pwrite:
    - shard-kbl:          NOTRUN -> SKIP [fdo#109271] +61

  * igt@kms_frontbuffer_tracking@fbcpsr-rgb101010-draw-blt:
    - shard-iclb:         PASS -> FAIL [fdo#105682] / [fdo#109247]

  * igt@kms_frontbuffer_tracking@psr-2p-scndscrn-spr-indfb-move:
    - shard-skl:          NOTRUN -> SKIP [fdo#109271] +194

  * igt@kms_frontbuffer_tracking@psr-rgb101010-draw-blt:
    - shard-skl:          PASS -> FAIL [fdo#103167] +2

  * igt@kms_invalid_dotclock:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109310]

  * igt@kms_panel_fitting@legacy:
    - shard-skl:          NOTRUN -> FAIL [fdo#105456]

  * igt@kms_pipe_crc_basic@nonblocking-crc-pipe-e:
    - shard-skl:          NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +23

  * igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
    - shard-skl:          NOTRUN -> INCOMPLETE [fdo#104108]

  * igt@kms_plane@plane-panning-top-left-pipe-b-planes:
    - shard-skl:          PASS -> FAIL [fdo#103166]

  * igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max:
    - shard-skl:          NOTRUN -> FAIL [fdo#108145] +2

  * igt@kms_plane_alpha_blend@pipe-a-constant-alpha-min:
    - shard-skl:          PASS -> FAIL [fdo#108145]

  * igt@kms_plane_alpha_blend@pipe-b-alpha-7efc:
    - shard-kbl:          NOTRUN -> FAIL [fdo#108145] / [fdo#108590]

  * igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
    - shard-skl:          PASS -> FAIL [fdo#107815]

  * igt@kms_plane_alpha_blend@pipe-c-alpha-7efc:
    - shard-skl:          NOTRUN -> FAIL [fdo#107815] / [fdo#108145] +1

  * igt@kms_plane_alpha_blend@pipe-c-alpha-transparant-fb:
    - shard-kbl:          NOTRUN -> FAIL [fdo#108145]

  * igt@kms_psr@psr2_cursor_render:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109441]

  * igt@kms_psr@psr2_sprite_plane_move:
    - shard-iclb:         PASS -> SKIP [fdo#109441] +2

  * igt@kms_psr@sprite_render:
    - shard-iclb:         PASS -> FAIL [fdo#107383]

  * igt@kms_setmode@basic:
    - shard-glk:          PASS -> FAIL [fdo#99912]

  * igt@kms_vblank@pipe-c-ts-continuation-suspend:
    - shard-kbl:          NOTRUN -> FAIL [fdo#104894] +1
    - shard-iclb:         PASS -> FAIL [fdo#104894]

  * igt@kms_vrr@flip-basic:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109502]

  * igt@prime_nv_test@nv_write_i915_gtt_mmap_read:
    - shard-iclb:         NOTRUN -> SKIP [fdo#109291]

  * igt@runner@aborted:
    - shard-iclb:         NOTRUN -> FAIL [fdo#109593]

  
#### Possible fixes ####

  * igt@gem_mmap_gtt@big-copy-xy:
    - shard-iclb:         TIMEOUT [fdo#109673] -> PASS

  * igt@gem_tiled_swapping@non-threaded:
    - shard-iclb:         FAIL [fdo#108686] -> PASS

  * igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
    - shard-iclb:         FAIL [fdo#107725] -> PASS

  * igt@kms_cursor_crc@cursor-128x128-suspend:
    - shard-apl:          FAIL [fdo#103191] / [fdo#103232] -> PASS

  * igt@kms_cursor_crc@cursor-256x85-random:
    - shard-apl:          FAIL [fdo#103232] -> PASS +2

  * igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy:
    - shard-hsw:          FAIL [fdo#105767] -> PASS

  * igt@kms_cursor_legacy@cursor-vs-flip-toggle:
    - shard-hsw:          FAIL [fdo#103355] -> PASS

  * igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-render:
    - shard-glk:          FAIL [fdo#103167] -> PASS

  * igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-pri-shrfb-draw-pwrite:
    - shard-iclb:         FAIL [fdo#109247] -> PASS +13

  * igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-spr-indfb-draw-pwrite:
    - shard-iclb:         FAIL [fdo#103167] -> PASS +12

  * {igt@kms_plane_multiple@atomic-pipe-c-tiling-none}:
    - shard-apl:          FAIL [fdo#110037] -> PASS

  * {igt@kms_plane_multiple@atomic-pipe-c-tiling-x}:
    - shard-iclb:         FAIL [fdo#110037] -> PASS

  * {igt@kms_plane_multiple@atomic-pipe-c-tiling-y}:
    - shard-glk:          FAIL [fdo#110037] -> PASS

  * igt@kms_plane_scaling@pipe-b-scaler-with-clipping-clamping:
    - shard-glk:          SKIP [fdo#109271] / [fdo#109278] -> PASS

  * igt@kms_psr2_su@page_flip:
    - shard-iclb:         SKIP [fdo#109642] -> PASS

  * igt@kms_psr@psr2_sprite_render:
    - shard-iclb:         SKIP [fdo#109441] -> PASS +1

  * igt@kms_psr@sprite_blt:
    - shard-iclb:         FAIL [fdo#107383] -> PASS

  * igt@kms_rotation_crc@multiplane-rotation:
    - shard-kbl:          INCOMPLETE [fdo#103665] -> PASS

  * igt@kms_vblank@pipe-b-ts-continuation-suspend:
    - shard-apl:          FAIL [fdo#104894] -> PASS

  
#### Warnings ####

  * igt@kms_busy@extended-pageflip-hang-oldfb-render-e:
    - shard-iclb:         INCOMPLETE -> SKIP [fdo#109278]

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
  [fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
  [fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
  [fdo#103184]: https://bugs.freedesktop.org/show_bug.cgi?id=103184
  [fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
  [fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
  [fdo#103355]: https://bugs.freedesktop.org/show_bug.cgi?id=103355
  [fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
  [fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
  [fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
  [fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
  [fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
  [fdo#105456]: https://bugs.freedesktop.org/show_bug.cgi?id=105456
  [fdo#105682]: https://bugs.freedesktop.org/show_bug.cgi?id=105682
  [fdo#105683]: https://bugs.freedesktop.org/show_bug.cgi?id=105683
  [fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
  [fdo#107383]: https://bugs.freedesktop.org/show_bug.cgi?id=107383
  [fdo#107725]: https://bugs.freedesktop.org/show_bug.cgi?id=107725
  [fdo#107815]: https://bugs.freedesktop.org/show_bug.cgi?id=107815
  [fdo#107936]: https://bugs.freedesktop.org/show_bug.cgi?id=107936
  [fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#108590]: https://bugs.freedesktop.org/show_bug.cgi?id=108590
  [fdo#108597]: https://bugs.freedesktop.org/show_bug.cgi?id=108597
  [fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
  [fdo#108739]: https://bugs.freedesktop.org/show_bug.cgi?id=108739
  [fdo#109247]: https://bugs.freedesktop.org/show_bug.cgi?id=109247
  [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
  [fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
  [fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
  [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
  [fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
  [fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
  [fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
  [fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
  [fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
  [fdo#109300]: https://bugs.freedesktop.org/show_bug.cgi?id=109300
  [fdo#109310]: https://bugs.freedesktop.org/show_bug.cgi?id=109310
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#109502]: https://bugs.freedesktop.org/show_bug.cgi?id=109502
  [fdo#109503]: https://bugs.freedesktop.org/show_bug.cgi?id=109503
  [fdo#109559]: https://bugs.freedesktop.org/show_bug.cgi?id=109559
  [fdo#109593]: https://bugs.freedesktop.org/show_bug.cgi?id=109593
  [fdo#109633]: https://bugs.freedesktop.org/show_bug.cgi?id=109633
  [fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
  [fdo#109673]: https://bugs.freedesktop.org/show_bug.cgi?id=109673
  [fdo#110037]: https://bugs.freedesktop.org/show_bug.cgi?id=110037
  [fdo#110038]: https://bugs.freedesktop.org/show_bug.cgi?id=110038
  [fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912


Participating hosts (10 -> 10)
------------------------------

  No changes in participating hosts


Build changes
-------------

    * Linux: CI_DRM_5774 -> Patchwork_12518

  CI_DRM_5774: eb58badf383e72d54ba48b8570ce7169c1419f6a @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_4890: 6d4d6949a099521003de252358601d22115e27ef @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_12518: 113c6307137d16b5c2a1edbcc6607687a09c021b @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12518/
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

✗ Fi.CI.BAT: failure for drm/i915: Ensure minimum CDCLK requirement for audio (rev4)

[Patchwork]

== Series Details ==

Series: drm/i915: Ensure minimum CDCLK requirement for audio (rev4)
URL   : https://patchwork.freedesktop.org/series/58132/
State : failure

== Summary ==

Applying: drm/i915: Force 2*96 MHz cdclk on glk/cnl when audio power is enabled
Applying: drm/i915: Skip modeset for cdclk changes if possible
error: sha1 information is lacking or useless (drivers/gpu/drm/i915/intel_cdclk.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch' to see the failed patch
Patch failed at 0002 drm/i915: Skip modeset for cdclk changes if possible
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx