From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/6] drm/i915: Refactor EDID fixed mode search
Date: Fri, 22 Mar 2019 18:48:03 +0200 [thread overview]
Message-ID: <20190322164803.GF3888@intel.com> (raw)
In-Reply-To: <87a7hncnrr.fsf@intel.com>
On Fri, Mar 22, 2019 at 10:32:40AM +0200, Jani Nikula wrote:
> On Thu, 21 Mar 2019, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Both LVDS and eDP have the same code to look up the preferred mode
> > from the connector probed_modes list. Move the code to a common
> > location.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> This series is something I've been meaning to do for ages.
I think I had these more or less typed up for a few years now.
Finally got an excuse (the bug) to finish them ;)
Series pushed to dinq. Thanks for the reviews/acks everyone.
> Thanks for
> doing it. Others beat me to review, I only glanced through. On the
> series,
>
> Acked-by: Jani Nikula <jani.nikula@intel.com>
>
>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 13 +++----------
> > drivers/gpu/drm/i915/intel_drv.h | 2 ++
> > drivers/gpu/drm/i915/intel_lvds.c | 14 +++-----------
> > drivers/gpu/drm/i915/intel_panel.c | 27 +++++++++++++++++++++++++++
> > 4 files changed, 35 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index 7c043e8f6298..5096e99ffaad 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -7057,7 +7057,6 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > struct drm_display_mode *fixed_mode = NULL;
> > struct drm_display_mode *downclock_mode = NULL;
> > bool has_dpcd;
> > - struct drm_display_mode *scan;
> > enum pipe pipe = INVALID_PIPE;
> > intel_wakeref_t wakeref;
> > struct edid *edid;
> > @@ -7110,15 +7109,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > }
> > intel_connector->edid = edid;
> >
> > - /* prefer fixed mode from EDID if available */
> > - list_for_each_entry(scan, &connector->probed_modes, head) {
> > - if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
> > - fixed_mode = drm_mode_duplicate(dev, scan);
> > - downclock_mode = intel_dp_drrs_init(
> > - intel_connector, fixed_mode);
> > - break;
> > - }
> > - }
> > + fixed_mode = intel_panel_edid_fixed_mode(intel_connector);
> > + if (fixed_mode)
> > + downclock_mode = intel_dp_drrs_init(intel_connector, fixed_mode);
> >
> > /* fallback to VBT if available for eDP */
> > if (!fixed_mode && dev_priv->vbt.lfp_lvds_vbt_mode) {
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 4d7ae579fc92..4d45ed6aa097 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -2158,6 +2158,8 @@ extern struct drm_display_mode *intel_find_panel_downclock(
> > struct drm_i915_private *dev_priv,
> > struct drm_display_mode *fixed_mode,
> > struct drm_connector *connector);
> > +struct drm_display_mode *
> > +intel_panel_edid_fixed_mode(struct intel_connector *connector);
> >
> > #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
> > int intel_backlight_device_register(struct intel_connector *connector);
> > diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> > index 845792aa0abe..0686ad1f12df 100644
> > --- a/drivers/gpu/drm/i915/intel_lvds.c
> > +++ b/drivers/gpu/drm/i915/intel_lvds.c
> > @@ -810,7 +810,6 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
> > struct intel_connector *intel_connector;
> > struct drm_connector *connector;
> > struct drm_encoder *encoder;
> > - struct drm_display_mode *scan; /* *modes, *bios_mode; */
> > struct drm_display_mode *fixed_mode = NULL;
> > struct drm_display_mode *downclock_mode = NULL;
> > struct edid *edid;
> > @@ -949,16 +948,9 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
> > }
> > intel_connector->edid = edid;
> >
> > - list_for_each_entry(scan, &connector->probed_modes, head) {
> > - if (scan->type & DRM_MODE_TYPE_PREFERRED) {
> > - DRM_DEBUG_KMS("using preferred mode from EDID: ");
> > - drm_mode_debug_printmodeline(scan);
> > -
> > - fixed_mode = drm_mode_duplicate(dev, scan);
> > - if (fixed_mode)
> > - goto out;
> > - }
> > - }
> > + fixed_mode = intel_panel_edid_fixed_mode(intel_connector);
> > + if (fixed_mode)
> > + goto out;
> >
> > /* Failed to get EDID, what about VBT? */
> > if (dev_priv->vbt.lfp_lvds_vbt_mode) {
> > diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> > index edd5540639b0..f42137512010 100644
> > --- a/drivers/gpu/drm/i915/intel_panel.c
> > +++ b/drivers/gpu/drm/i915/intel_panel.c
> > @@ -99,6 +99,33 @@ intel_find_panel_downclock(struct drm_i915_private *dev_priv,
> > return NULL;
> > }
> >
> > +struct drm_display_mode *
> > +intel_panel_edid_fixed_mode(struct intel_connector *connector)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(connector->base.dev);
> > + const struct drm_display_mode *scan;
> > +
> > + /* prefer fixed mode from EDID if available */
> > + list_for_each_entry(scan, &connector->base.probed_modes, head) {
> > + struct drm_display_mode *fixed_mode;
> > +
> > + if ((scan->type & DRM_MODE_TYPE_PREFERRED) == 0)
> > + continue;
> > +
> > + fixed_mode = drm_mode_duplicate(&dev_priv->drm, scan);
> > + if (!fixed_mode)
> > + return NULL;
> > +
> > + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] using preferred mode from EDID: ",
> > + connector->base.base.id, connector->base.name);
> > + drm_mode_debug_printmodeline(fixed_mode);
> > +
> > + return fixed_mode;
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > /* adjusted_mode has been preset to be the panel's fixed mode */
> > void
> > intel_pch_panel_fitting(struct intel_crtc *intel_crtc,
>
> --
> Jani Nikula, Intel Open Source Graphics Center
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2019-03-22 16:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-21 13:24 [PATCH 1/6] drm/i915: Refactor EDID fixed mode search Ville Syrjala
2019-03-21 13:24 ` [PATCH 2/6] drm/i915: Pick the first mode from EDID as the fixed mode when there is no preferred mode Ville Syrjala
2019-03-21 14:54 ` Adam Jackson
2019-03-21 13:24 ` [PATCH 3/6] drm/i915: Refactor VBT fixed mode handling Ville Syrjala
2019-03-21 17:14 ` Chris Wilson
2019-03-21 13:24 ` [PATCH 4/6] drm/i915: Adjust DSI " Ville Syrjala
2019-03-21 17:26 ` Chris Wilson
2019-03-21 13:24 ` [PATCH 5/6] drm/i915: Stop hand rolling drm_mode_match() Ville Syrjala
2019-03-21 17:23 ` Chris Wilson
2019-03-21 17:32 ` Ville Syrjälä
2019-03-21 13:24 ` [PATCH 6/6] drm/i915: Clean up EDID downclock mode lookup Ville Syrjala
2019-03-21 17:17 ` Chris Wilson
2019-03-21 15:39 ` ✓ Fi.CI.BAT: success for series starting with [1/6] drm/i915: Refactor EDID fixed mode search Patchwork
2019-03-21 17:12 ` [PATCH 1/6] " Chris Wilson
2019-03-22 7:10 ` ✓ Fi.CI.IGT: success for series starting with [1/6] " Patchwork
2019-03-22 8:32 ` [PATCH 1/6] " Jani Nikula
2019-03-22 16:48 ` Ville Syrjälä [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190322164803.GF3888@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox