public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Sharma, Shashank" <shashank.sharma@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/2] drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used
Date: Tue, 30 Apr 2019 13:39:54 +0300	[thread overview]
Message-ID: <20190430103954.GC24299@intel.com> (raw)
In-Reply-To: <1b775593-5259-70b8-84da-9a3dee237f64@intel.com>

On Tue, Apr 30, 2019 at 10:22:40AM +0530, Sharma, Shashank wrote:
> 
> On 4/26/2019 8:07 PM, Ville Syrjälä wrote:
> > On Fri, Apr 26, 2019 at 06:40:11PM +0530, Sharma, Shashank wrote:
> >> On 4/13/2019 12:00 AM, Ville Syrjala wrote:
> >>> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >>>
> >>> The pipe has a special HDR mode with higher precision when only
> >>> HDR planes are active. Let's use it.
> >>>
> >>> Curiously this fixes the kms_color gamma/degamma tests when
> >>> using a HDR plane, which is always the case unless one hacks
> >>> the test to use an SDR plane. If one does hack the test to use
> >>> an SDR plane it does pass already.
> >>>
> >>> I have no actual explanation how the output after the gamma
> >>> LUT can be different between the two modes. The way the tests
> >>> are written should mean that the output should be identical
> >>> between the solid color vs. the gradient. But clearly that
> >>> somehow doesn't hold true for the HDR planes in non-HDR pipe
> >>> mode. Anyways, as long as we stick to one type of plane the
> >>> test should produce sensible results now.
> >>>
> >>> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >>> ---
> >>>    drivers/gpu/drm/i915/i915_reg.h      |  1 +
> >>>    drivers/gpu/drm/i915/intel_display.c |  7 +++++++
> >>>    drivers/gpu/drm/i915/intel_sprite.h  | 12 ++++++++----
> >>>    3 files changed, 16 insertions(+), 4 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> >>> index 8ad2f0a03f28..90d60ecd3317 100644
> >>> --- a/drivers/gpu/drm/i915/i915_reg.h
> >>> +++ b/drivers/gpu/drm/i915/i915_reg.h
> >>> @@ -5767,6 +5767,7 @@ enum {
> >>>    #define _PIPE_MISC_B			0x71030
> >>>    #define   PIPEMISC_YUV420_ENABLE	(1 << 27)
> >>>    #define   PIPEMISC_YUV420_MODE_FULL_BLEND (1 << 26)
> >>> +#define   PIPEMISC_HDR_MODE		(1 << 23) /* icl+ */
> >>>    #define   PIPEMISC_OUTPUT_COLORSPACE_YUV  (1 << 11)
> >>>    #define   PIPEMISC_DITHER_BPC_MASK	(7 << 5)
> >>>    #define   PIPEMISC_DITHER_8_BPC		(0 << 5)
> >>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> >>> index 490bd49ff42a..d0dbdbd5db3f 100644
> >>> --- a/drivers/gpu/drm/i915/intel_display.c
> >>> +++ b/drivers/gpu/drm/i915/intel_display.c
> >>> @@ -4055,6 +4055,9 @@ static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_sta
> >>>    			ironlake_pfit_disable(old_crtc_state);
> >>>    	}
> >>>    
> >>> +	if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> >>> +		bdw_set_pipemisc(new_crtc_state);
> >>> +
> >>>    	if (INTEL_GEN(dev_priv) >= 11)
> >>>    		icl_set_pipe_chicken(crtc);
> >>>    }
> >>> @@ -8869,6 +8872,10 @@ static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state)
> >>>    		val |= PIPEMISC_YUV420_ENABLE |
> >>>    			PIPEMISC_YUV420_MODE_FULL_BLEND;
> >>>    
> >>> +	if (INTEL_GEN(dev_priv) >= 11 &&
> >>> +	    (crtc_state->active_planes & ~icl_hdr_plane_mask()) == 0)
> >>> +		val |= PIPEMISC_HDR_MODE;
> >>> +
> >> Shouldn't we check if the content being played on plane is HDR before
> >> enabling this bit (even though I am not sure if there is any harm in
> >> doing that)? Or maybe check the connector->output_hdr_metadata ? Most of
> >> the times we would be sending SDR buffers on this plane. What happens
> >> exactly when we set this bit ? The bspec says:
> >>
> >> "This field enables the HDR mode, allowing for higher precision output
> >> from the HDR supporting planes and bypassing the SDR planes in blending. "
> > I think the bit is just misnamed (like most things with "HDR" in their
> > name). It's just a "gimme moar precision" bit.
> 
> Lets make this a bit more clear, may be rename the bit to 
> PIPEMISC_HDR_PRECISION_MODE instead?

Then it won't match the spec.

> 
> With that change, this patch is
> 
> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
> 
> >

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2019-04-30 10:39 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-12 18:30 [PATCH 1/2] drm/i915: Flatten and rename haswell_set_pipemisc() Ville Syrjala
2019-04-12 18:30 ` [PATCH 2/2] drm/i915: Enable pipe HDR mode on ICL if only HDR planes are used Ville Syrjala
2019-04-26 13:10   ` Sharma, Shashank
2019-04-26 14:37     ` Ville Syrjälä
2019-04-30  4:52       ` Sharma, Shashank
2019-04-30 10:39         ` Ville Syrjälä [this message]
2019-04-30 13:43           ` Sharma, Shashank
2019-04-30 19:19             ` Ville Syrjälä
2019-04-30  9:17       ` Shankar, Uma
2019-04-12 18:34 ` [PATCH 1/2] drm/i915: Flatten and rename haswell_set_pipemisc() Chris Wilson
2019-04-12 19:41 ` ✓ Fi.CI.BAT: success for series starting with [1/2] " Patchwork
2019-04-12 23:27 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190430103954.GC24299@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=shashank.sharma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox