public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Intel-gfx@lists.freedesktop.org
Subject: [RFC 13/28] drm/i915: Convert i915_gem_init_hw to intel_gt
Date: Thu, 13 Jun 2019 14:35:24 +0100	[thread overview]
Message-ID: <20190613133539.12620-14-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20190613133539.12620-1-tvrtko.ursulin@linux.intel.com>

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

More removal of implicit dev_priv from using old mmio accessors.

Actually the top level function remains but is split into a part which
writes to i915 and part which operates on intel_gt in order to initialize
the hardware.

GuC and engines are the only odd ones out remaining.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 drivers/gpu/drm/i915/i915_gem.c | 66 ++++++++++++++++++++-------------
 1 file changed, 40 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index e54cd30534dc..b6f450e782e7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1234,28 +1234,32 @@ static void init_unused_rings(struct intel_gt *gt)
 	}
 }
 
-int i915_gem_init_hw(struct drm_i915_private *dev_priv)
+static int init_hw(struct intel_gt *gt)
 {
+	struct drm_i915_private *i915 = gt->i915;
+	struct intel_uncore *uncore = gt->uncore;
 	int ret;
 
-	dev_priv->gt.last_init_time = ktime_get();
+	gt->last_init_time = ktime_get();
 
 	/* Double layer security blanket, see i915_gem_init() */
-	intel_uncore_forcewake_get(&dev_priv->uncore, FORCEWAKE_ALL);
+	intel_uncore_forcewake_get(uncore, FORCEWAKE_ALL);
 
-	if (HAS_EDRAM(dev_priv) && INTEL_GEN(dev_priv) < 9)
-		I915_WRITE(HSW_IDICR, I915_READ(HSW_IDICR) | IDIHASHMSK(0xf));
+	if (HAS_EDRAM(i915) && INTEL_GEN(i915) < 9)
+		intel_uncore_rmw(uncore, HSW_IDICR, 0, IDIHASHMSK(0xf));
 
-	if (IS_HASWELL(dev_priv))
-		I915_WRITE(MI_PREDICATE_RESULT_2, IS_HSW_GT3(dev_priv) ?
-			   LOWER_SLICE_ENABLED : LOWER_SLICE_DISABLED);
+	if (IS_HASWELL(i915))
+		intel_uncore_write(uncore,
+				   MI_PREDICATE_RESULT_2,
+				   IS_HSW_GT3(i915) ?
+				   LOWER_SLICE_ENABLED : LOWER_SLICE_DISABLED);
 
 	/* Apply the GT workarounds... */
-	intel_gt_apply_workarounds(&dev_priv->gt);
+	intel_gt_apply_workarounds(gt);
 	/* ...and determine whether they are sticking. */
-	intel_gt_verify_workarounds(&dev_priv->gt, "init");
+	intel_gt_verify_workarounds(gt, "init");
 
-	intel_gt_init_swizzling(&dev_priv->gt);
+	intel_gt_init_swizzling(gt);
 
 	/*
 	 * At least 830 can leave some of the unused rings
@@ -1263,48 +1267,58 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv)
 	 * will prevent c3 entry. Makes sure all unused rings
 	 * are totally idle.
 	 */
-	init_unused_rings(&dev_priv->gt);
-
-	BUG_ON(!dev_priv->kernel_context);
-	ret = i915_terminally_wedged(dev_priv);
-	if (ret)
-		goto out;
+	init_unused_rings(gt);
 
-	ret = i915_ppgtt_init_hw(&dev_priv->gt);
+	ret = i915_ppgtt_init_hw(gt);
 	if (ret) {
 		DRM_ERROR("Enabling PPGTT failed (%d)\n", ret);
 		goto out;
 	}
 
-	ret = intel_wopcm_init_hw(&dev_priv->wopcm);
+	ret = intel_wopcm_init_hw(&i915->wopcm);
 	if (ret) {
 		DRM_ERROR("Enabling WOPCM failed (%d)\n", ret);
 		goto out;
 	}
 
 	/* We can't enable contexts until all firmware is loaded */
-	ret = intel_uc_init_hw(dev_priv);
+	ret = intel_uc_init_hw(i915);
 	if (ret) {
 		DRM_ERROR("Enabling uc failed (%d)\n", ret);
 		goto out;
 	}
 
-	intel_mocs_init_l3cc_table(&dev_priv->gt);
+	intel_mocs_init_l3cc_table(gt);
 
 	/* Only when the HW is re-initialised, can we replay the requests */
-	ret = intel_engines_resume(dev_priv);
+	ret = intel_engines_resume(i915);
 	if (ret)
 		goto cleanup_uc;
 
-	intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL);
+	intel_uncore_forcewake_put(uncore, FORCEWAKE_ALL);
 
-	intel_engines_set_scheduler_caps(dev_priv);
 	return 0;
 
 cleanup_uc:
-	intel_uc_fini_hw(dev_priv);
+	intel_uc_fini_hw(i915);
 out:
-	intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL);
+	intel_uncore_forcewake_put(uncore, FORCEWAKE_ALL);
+
+	return ret;
+}
+
+int i915_gem_init_hw(struct drm_i915_private *i915)
+{
+	int ret;
+
+	BUG_ON(!i915->kernel_context);
+	ret = i915_terminally_wedged(i915);
+	if (ret)
+		return ret;
+
+	ret = init_hw(&i915->gt);
+
+	intel_engines_set_scheduler_caps(i915);
 
 	return ret;
 }
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-06-13 13:39 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-13 13:35 [RFC v3 00/28] Implicit dev_priv removal and GT compartmentalization Tvrtko Ursulin
2019-06-13 13:35 ` [RFC 01/28] drm/i915: Convert intel_vgt_(de)balloon to uncore Tvrtko Ursulin
2019-06-13 13:41   ` Chris Wilson
2019-06-13 13:35 ` [RFC 02/28] drm/i915: Introduce struct intel_gt as replacement for anonymous i915->gt Tvrtko Ursulin
2019-06-13 13:42   ` Chris Wilson
2019-06-13 13:35 ` [RFC 03/28] drm/i915: Move intel_gt initialization to a separate file Tvrtko Ursulin
2019-06-13 13:43   ` Chris Wilson
2019-06-13 13:35 ` [RFC 04/28] drm/i915: Store some backpointers in struct intel_gt Tvrtko Ursulin
2019-06-13 13:44   ` Chris Wilson
2019-06-13 13:35 ` [RFC 05/28] drm/i915: Make i915_check_and_clear_faults take intel_gt Tvrtko Ursulin
2019-06-13 13:45   ` Chris Wilson
2019-06-13 13:35 ` [RFC 06/28] drm/i915: Convert i915_gem_init_swizzling to intel_gt Tvrtko Ursulin
2019-06-13 13:49   ` Chris Wilson
2019-06-14  9:06     ` Tvrtko Ursulin
2019-06-14  9:24       ` Chris Wilson
2019-06-14  9:42         ` Tvrtko Ursulin
2019-06-14  9:59           ` Chris Wilson
2019-06-13 13:35 ` [RFC 07/28] drm/i915: Convert init_unused_rings " Tvrtko Ursulin
2019-06-13 13:49   ` Chris Wilson
2019-06-13 13:35 ` [RFC 08/28] drm/i915: Convert gt workarounds " Tvrtko Ursulin
2019-06-13 13:50   ` Chris Wilson
2019-06-13 13:35 ` [RFC 09/28] drm/i915: Store backpointer to intel_gt in the engine Tvrtko Ursulin
2019-06-13 13:50   ` Chris Wilson
2019-06-13 13:52   ` Chris Wilson
2019-06-13 13:35 ` [RFC 10/28] drm/i915: Convert intel_mocs_init_l3cc_table to intel_gt Tvrtko Ursulin
2019-06-13 13:53   ` Chris Wilson
2019-06-13 13:35 ` [RFC 11/28] drm/i915: Convert i915_ppgtt_init_hw " Tvrtko Ursulin
2019-06-13 13:55   ` Chris Wilson
2019-06-13 13:35 ` [RFC 12/28] drm/i915: Consolidate some open coded mmio rmw Tvrtko Ursulin
2019-06-13 13:35 ` Tvrtko Ursulin [this message]
2019-06-13 13:59   ` [RFC 13/28] drm/i915: Convert i915_gem_init_hw to intel_gt Chris Wilson
2019-06-13 16:11     ` Tvrtko Ursulin
2019-06-13 16:30       ` Chris Wilson
2019-06-14  9:34         ` Tvrtko Ursulin
2019-06-14  9:41           ` Chris Wilson
2019-06-14 15:00             ` Tvrtko Ursulin
2019-06-14 15:10               ` Chris Wilson
2019-06-13 13:35 ` [RFC 14/28] drm/i915: Move intel_engines_resume into common init Tvrtko Ursulin
2019-06-13 14:01   ` Chris Wilson
2019-06-13 13:35 ` [RFC 15/28] drm/i915: Stop using I915_READ/WRITE in intel_wopcm_init_hw Tvrtko Ursulin
2019-06-13 13:35 ` [RFC 16/28] drm/i915: Compartmentalize i915_ggtt_probe_hw Tvrtko Ursulin
2019-06-13 14:03   ` Chris Wilson
2019-06-14  9:35     ` Tvrtko Ursulin
2019-06-14 10:23       ` Chris Wilson
2019-06-14 15:01         ` Tvrtko Ursulin
2019-06-13 13:35 ` [RFC 17/28] drm/i915: Compartmentalize i915_ggtt_init_hw Tvrtko Ursulin
2019-06-13 14:05   ` Chris Wilson
2019-06-13 13:35 ` [RFC 18/28] drm/i915: Make ggtt invalidation work on ggtt Tvrtko Ursulin
2019-06-13 14:05   ` Chris Wilson
2019-06-13 13:35 ` [RFC 19/28] drm/i915: Store intel_gt backpointer in vm Tvrtko Ursulin
2019-06-13 13:35 ` [RFC 20/28] drm/i915: Compartmentalize i915_gem_suspend/restore_gtt_mappings Tvrtko Ursulin
2019-06-13 14:08   ` Chris Wilson
2019-06-14  9:51     ` Tvrtko Ursulin
2019-06-14 10:26       ` Chris Wilson
2019-06-13 13:35 ` [RFC 21/28] drm/i915/gtt: Reduce source verbosity by caching repeated dereferences Tvrtko Ursulin
2019-06-13 14:12   ` Chris Wilson
2019-06-13 15:44     ` Tvrtko Ursulin
2019-06-13 15:18 ` [RFC 22/28] drm/i915: Convert i915_gem_flush_ggtt_writes to intel_gt Tvrtko Ursulin
2019-06-13 15:28   ` Chris Wilson
2019-06-13 15:18 ` [RFC 23/28] drm/i915: Compartmentalize timeline_init/park/fini Tvrtko Ursulin
2019-06-13 15:31   ` Chris Wilson
2019-06-13 15:19 ` [RFC 24/28] drm/i915: Compartmentalize i915_ggtt_cleanup_hw Tvrtko Ursulin
2019-06-13 15:19   ` [RFC 25/28] drm/i915: Compartmentalize i915_gem_init_ggtt Tvrtko Ursulin
2019-06-13 15:38     ` Chris Wilson
2019-06-13 15:48       ` Tvrtko Ursulin
2019-06-13 15:19   ` [RFC 26/28] drm/i915: Store ggtt pointer in intel_gt Tvrtko Ursulin
2019-06-13 15:42     ` Chris Wilson
2019-06-13 15:55       ` Tvrtko Ursulin
2019-06-13 15:19   ` [RFC 27/28] drm/i915: Compartmentalize ring buffer creation Tvrtko Ursulin
2019-06-13 15:46     ` Chris Wilson
2019-06-13 15:56       ` Tvrtko Ursulin
2019-06-13 16:33         ` Chris Wilson
2019-06-13 15:19   ` [RFC 28/28] drm/i915: Make timelines gt centric Tvrtko Ursulin
2019-06-13 15:47     ` Chris Wilson
2019-06-13 21:36       ` Chris Wilson
2019-06-13 15:36   ` [RFC 24/28] drm/i915: Compartmentalize i915_ggtt_cleanup_hw Chris Wilson
2019-06-14 10:28     ` Tvrtko Ursulin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190613133539.12620-14-tvrtko.ursulin@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=Intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox