Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ramalingam C <ramalingam.c@intel.com>
To: intel-gfx <intel-gfx@lists.freedesktop.org>,
	dri-devel <dri-devel@lists.freedesktop.org>,
	Pekka Paalanen <ppaalanen@gmail.com>,
	Daniel Vetter <daniel@ffwll.ch>
Subject: [PATCH v10 4/6] drm/hdcp: update content protection property with uevent
Date: Fri, 12 Jul 2019 12:30:24 +0530	[thread overview]
Message-ID: <20190712070026.13088-5-ramalingam.c@intel.com> (raw)
In-Reply-To: <20190712070026.13088-1-ramalingam.c@intel.com>

drm function is defined and exported to update a connector's
content protection property state and to generate a uevent along
with it.

Need ACK for the uevent from userspace consumer.

v2:
  Update only when state is different from old one.
v3:
  KDoc is added [Daniel]
v4:
  KDoc is extended bit more [pekka]
v5:
  Uevent usage is documented at kdoc of "Content Protection" also
  [pekka]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
 drivers/gpu/drm/drm_connector.c | 17 +++++++++++++----
 drivers/gpu/drm/drm_hdcp.c      | 34 +++++++++++++++++++++++++++++++++
 include/drm/drm_hdcp.h          |  2 ++
 3 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index fefd36a1c4c9..1a8b254fe5de 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -947,10 +947,19 @@ static const struct drm_prop_enum_list hdmi_colorspaces[] = {
  *	- If the state is DESIRED, kernel should attempt to re-authenticate the
  *	  link whenever possible. This includes across disable/enable, dpms,
  *	  hotplug, downstream device changes, link status failures, etc..
- *	- Userspace is responsible for polling the property to determine when
- *	  the value transitions from ENABLED to DESIRED. This signifies the link
- *	  is no longer protected and userspace should take appropriate action
- *	  (whatever that might be).
+ *	- Kernel sends uevent with the connector id and property id through
+ *	  @drm_hdcp_update_content_protection, upon below kernel triggered
+ *	  scenarios:
+ *		DESIRED -> ENABLED	(authentication success)
+ *		ENABLED -> DESIRED	(termination of authentication)
+ *	- Please note no uevents for userspace triggered property state changes,
+ *	  which can't fail such as
+ *		DESIRED/ENABLED -> UNDESIRED
+ *		UNDESIRED -> DESIRED
+ *	- Userspace is responsible for polling the property or listen to uevents
+ *	  to determine when the value transitions from ENABLED to DESIRED.
+ *	  This signifies the link is no longer protected and userspace should
+ *	  take appropriate action (whatever that might be).
  *
  * HDCP Content Type:
  *	This Enum property is used by the userspace to declare the content type
diff --git a/drivers/gpu/drm/drm_hdcp.c b/drivers/gpu/drm/drm_hdcp.c
index ce235fd1c844..77433ee3d652 100644
--- a/drivers/gpu/drm/drm_hdcp.c
+++ b/drivers/gpu/drm/drm_hdcp.c
@@ -374,6 +374,10 @@ DRM_ENUM_NAME_FN(drm_get_hdcp_content_type_name,
  *
  * The content protection will be set to &drm_connector_state.content_protection
  *
+ * When kernel triggered content protection state change like DESIRED->ENABLED
+ * and ENABLED->DESIRED, will use drm_hdcp_update_content_protection() to update
+ * the content protection state of a connector.
+ *
  * Returns:
  * Zero on success, negative errno on failure.
  */
@@ -414,3 +418,33 @@ int drm_connector_attach_content_protection_property(
 	return 0;
 }
 EXPORT_SYMBOL(drm_connector_attach_content_protection_property);
+
+/**
+ * drm_hdcp_update_content_protection - Updates the content protection state
+ * of a connector
+ *
+ * @connector: drm_connector on which content protection state needs an update
+ * @val: New state of the content protection property
+ *
+ * This function can be used by display drivers, to update the kernel triggered
+ * content protection state changes of a drm_connector such as DESIRED->ENABLED
+ * and ENABLED->DESIRED. No uevent for DESIRED->UNDESIRED or ENABLED->UNDESIRED,
+ * as userspace is triggering such state change and kernel performs it without
+ * fail.This function update the new state of the property into the connector's
+ * state and generate an uevent to notify the userspace.
+ */
+void drm_hdcp_update_content_protection(struct drm_connector *connector,
+					u64 val)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_connector_state *state = connector->state;
+
+	WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
+	if (state->content_protection == val)
+		return;
+
+	state->content_protection = val;
+	drm_sysfs_connector_status_event(connector,
+				 dev->mode_config.content_protection_property);
+}
+EXPORT_SYMBOL(drm_hdcp_update_content_protection);
diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h
index 2970abdfaf12..dd864ac9ce85 100644
--- a/include/drm/drm_hdcp.h
+++ b/include/drm/drm_hdcp.h
@@ -292,4 +292,6 @@ bool drm_hdcp_check_ksvs_revoked(struct drm_device *dev,
 				 u8 *ksvs, u32 ksv_count);
 int drm_connector_attach_content_protection_property(
 		struct drm_connector *connector, bool hdcp_content_type);
+void drm_hdcp_update_content_protection(struct drm_connector *connector,
+					u64 val);
 #endif
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-07-12  7:00 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-12  7:00 [PATCH v10 0/6] HDCP2.2 Phase II Ramalingam C
2019-07-12  7:00 ` [PATCH v10 1/6] drm: Add Content protection type property Ramalingam C
2019-07-14 11:00   ` [PATCH v11 " Ramalingam C
2019-07-29 14:20     ` Pekka Paalanen
2019-07-29  9:33       ` Ramalingam C
2019-08-01 10:05         ` Pekka Paalanen
2019-08-01 10:18           ` Ramalingam C
2019-07-12  7:00 ` [PATCH v10 2/6] drm/i915: Attach content " Ramalingam C
2019-07-12  7:00 ` [PATCH v10 3/6] drm: uevent for connector status change Ramalingam C
2019-07-12  7:00 ` Ramalingam C [this message]
2019-07-12  7:00 ` [PATCH v10 5/6] drm/i915: update the hdcp state with uevent Ramalingam C
2019-07-12  7:00 ` [PATCH v10 6/6] drm/hdcp: reference for srm file format Ramalingam C
2019-08-01 10:36   ` Sharma, Shashank
2019-08-01 10:43     ` Ramalingam C
2019-07-12 17:48 ` ✗ Fi.CI.CHECKPATCH: warning for HDCP2.2 Phase II (rev12) Patchwork
2019-07-12 18:07 ` ✓ Fi.CI.BAT: success " Patchwork
2019-07-14  9:25 ` ✓ Fi.CI.IGT: " Patchwork
2019-07-14 18:05 ` ✗ Fi.CI.CHECKPATCH: warning for HDCP2.2 Phase II (rev13) Patchwork
2019-07-14 18:24 ` ✓ Fi.CI.BAT: success " Patchwork
2019-07-15  3:09 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190712070026.13088-5-ramalingam.c@intel.com \
    --to=ramalingam.c@intel.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ppaalanen@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox