From: Ramalingam C <ramalingam.c@intel.com>
To: Pekka Paalanen <ppaalanen@gmail.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>,
dri-devel <dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v11 1/6] drm: Add Content protection type property
Date: Mon, 29 Jul 2019 15:03:16 +0530 [thread overview]
Message-ID: <20190729093316.GB14727@intel.com> (raw)
In-Reply-To: <20190729172040.48257318@eldfell.localdomain>
On 2019-07-29 at 17:20:40 +0300, Pekka Paalanen wrote:
> On Sun, 14 Jul 2019 16:30:08 +0530
> Ramalingam C <ramalingam.c@intel.com> wrote:
>
> > This patch adds a DRM ENUM property to the selected connectors.
> > This property is used for mentioning the protected content's type
> > from userspace to kernel HDCP authentication.
> >
> > Type of the stream is decided by the protected content providers.
> > Type 0 content can be rendered on any HDCP protected display wires.
> > But Type 1 content can be rendered only on HDCP2.2 protected paths.
> >
> > So when a userspace sets this property to Type 1 and starts the HDCP
> > enable, kernel will honour it only if HDCP2.2 authentication is through
> > for type 1. Else HDCP enable will be failed.
> >
> > Need ACK for this new conenctor property from userspace consumer.
> >
> > v2:
> > cp_content_type is replaced with content_protection_type [daniel]
> > check at atomic_set_property is removed [Maarten]
> > v3:
> > %s/content_protection_type/hdcp_content_type [Pekka]
> > v4:
> > property is created for the first requested connector and then reused.
> > [Danvet]
> > v5:
> > kernel doc nits addressed [Daniel]
> > Rebased as part of patch reordering.
> > v6:
> > Kernel docs are modified [pekka]
> > v7:
> > More details in Kernel docs. [pekka]
> > v8:
> > Few more clarification into kernel doc of content type [pekka]
> > v9:
> > Small fixes in coding style.
> >
> > Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
> > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > ---
> > drivers/gpu/drm/drm_atomic_uapi.c | 4 ++
> > drivers/gpu/drm/drm_connector.c | 51 +++++++++++++++++++++++
> > drivers/gpu/drm/drm_hdcp.c | 36 +++++++++++++++-
> > drivers/gpu/drm/i915/display/intel_hdcp.c | 4 +-
> > include/drm/drm_connector.h | 7 ++++
> > include/drm/drm_hdcp.h | 2 +-
> > include/drm/drm_mode_config.h | 6 +++
> > include/uapi/drm/drm_mode.h | 4 ++
> > 8 files changed, 111 insertions(+), 3 deletions(-)
>
>
> Snip - sorry, gmail simply refuses to deliver my mail without trimming
> it hard.
>
> >
> > diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> > index 5ab331e5dc23..5c954394093f 100644
> > --- a/include/uapi/drm/drm_mode.h
> > +++ b/include/uapi/drm/drm_mode.h
> > @@ -218,6 +218,10 @@ extern "C" {
> > #define DRM_MODE_CONTENT_PROTECTION_DESIRED 1
> > #define DRM_MODE_CONTENT_PROTECTION_ENABLED 2
> >
> > +/* Content Type classification for HDCP2.2 vs others */
> > +#define DRM_MODE_HDCP_CONTENT_TYPE0 0
> > +#define DRM_MODE_HDCP_CONTENT_TYPE1 1
>
> Hi,
>
> I still believe that these definitions do not belong in the uapi
> header. Userspace must use the string names instead.
>
> Otherwise the patch looks fine, though my Weston review is still
> on-going.
I assume that still we need to wait for the weston review completion.
Hence I request you to respond here once you are comfortable with this new uAPI.
Thanks,
- Ram
>
>
> Thanks,
> pq
>
> > +
> > struct drm_mode_modeinfo {
> > __u32 clock;
> > __u16 hdisplay;
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-07-29 9:33 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 7:00 [PATCH v10 0/6] HDCP2.2 Phase II Ramalingam C
2019-07-12 7:00 ` [PATCH v10 1/6] drm: Add Content protection type property Ramalingam C
2019-07-14 11:00 ` [PATCH v11 " Ramalingam C
2019-07-29 14:20 ` Pekka Paalanen
2019-07-29 9:33 ` Ramalingam C [this message]
2019-08-01 10:05 ` Pekka Paalanen
2019-08-01 10:18 ` Ramalingam C
2019-07-12 7:00 ` [PATCH v10 2/6] drm/i915: Attach content " Ramalingam C
2019-07-12 7:00 ` [PATCH v10 3/6] drm: uevent for connector status change Ramalingam C
2019-07-12 7:00 ` [PATCH v10 4/6] drm/hdcp: update content protection property with uevent Ramalingam C
2019-07-12 7:00 ` [PATCH v10 5/6] drm/i915: update the hdcp state " Ramalingam C
2019-07-12 7:00 ` [PATCH v10 6/6] drm/hdcp: reference for srm file format Ramalingam C
2019-08-01 10:36 ` Sharma, Shashank
2019-08-01 10:43 ` Ramalingam C
2019-07-12 17:48 ` ✗ Fi.CI.CHECKPATCH: warning for HDCP2.2 Phase II (rev12) Patchwork
2019-07-12 18:07 ` ✓ Fi.CI.BAT: success " Patchwork
2019-07-14 9:25 ` ✓ Fi.CI.IGT: " Patchwork
2019-07-14 18:05 ` ✗ Fi.CI.CHECKPATCH: warning for HDCP2.2 Phase II (rev13) Patchwork
2019-07-14 18:24 ` ✓ Fi.CI.BAT: success " Patchwork
2019-07-15 3:09 ` ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190729093316.GB14727@intel.com \
--to=ramalingam.c@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ppaalanen@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox