Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/5] drm/i915/tgl: re-indent code to prepare for DKL changes
Date: Thu, 25 Jul 2019 16:56:40 -0700	[thread overview]
Message-ID: <20190725235643.6870-3-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20190725235643.6870-1-lucas.demarchi@intel.com>

The final save operation into pll_state of the calculations done will
be different for DKL PHY. Prepare for that by reindenting code so it's
easier to check for correctness. This one has no change in behavior.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-10-lucas.demarchi@intel.com
---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 119 ++++++++++--------
 1 file changed, 66 insertions(+), 53 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index f9bdf8514a53..7eefd63a8b7e 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -2804,60 +2804,73 @@ static bool icl_calc_mg_pll_state(struct intel_crtc_state *crtc_state,
 	}
 	ssc_steplog = 4;
 
-	pll_state->mg_pll_div0 = (m2div_rem > 0 ? MG_PLL_DIV0_FRACNEN_H : 0) |
-				  MG_PLL_DIV0_FBDIV_FRAC(m2div_frac) |
-				  MG_PLL_DIV0_FBDIV_INT(m2div_int);
-
-	pll_state->mg_pll_div1 = MG_PLL_DIV1_IREF_NDIVRATIO(iref_ndiv) |
-				 MG_PLL_DIV1_DITHER_DIV_2 |
-				 MG_PLL_DIV1_NDIVRATIO(1) |
-				 MG_PLL_DIV1_FBPREDIV(m1div);
-
-	pll_state->mg_pll_lf = MG_PLL_LF_TDCTARGETCNT(tdc_targetcnt) |
-			       MG_PLL_LF_AFCCNTSEL_512 |
-			       MG_PLL_LF_GAINCTRL(1) |
-			       MG_PLL_LF_INT_COEFF(int_coeff) |
-			       MG_PLL_LF_PROP_COEFF(prop_coeff);
-
-	pll_state->mg_pll_frac_lock = MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32 |
-				      MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_32 |
-				      MG_PLL_FRAC_LOCK_LOCKTHRESH(10) |
-				      MG_PLL_FRAC_LOCK_DCODITHEREN |
-				      MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(feedfwgain);
-	if (use_ssc || m2div_rem > 0)
-		pll_state->mg_pll_frac_lock |= MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN;
-
-	pll_state->mg_pll_ssc = (use_ssc ? MG_PLL_SSC_EN : 0) |
-				MG_PLL_SSC_TYPE(2) |
-				MG_PLL_SSC_STEPLENGTH(ssc_steplen) |
-				MG_PLL_SSC_STEPNUM(ssc_steplog) |
-				MG_PLL_SSC_FLLEN |
-				MG_PLL_SSC_STEPSIZE(ssc_stepsize);
-
-	pll_state->mg_pll_tdc_coldst_bias = MG_PLL_TDC_COLDST_COLDSTART |
-					    MG_PLL_TDC_COLDST_IREFINT_EN |
-					    MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(iref_pulse_w) |
-					    MG_PLL_TDC_TDCOVCCORR_EN |
-					    MG_PLL_TDC_TDCSEL(3);
-
-	pll_state->mg_pll_bias = MG_PLL_BIAS_BIAS_GB_SEL(3) |
-				 MG_PLL_BIAS_INIT_DCOAMP(0x3F) |
-				 MG_PLL_BIAS_BIAS_BONUS(10) |
-				 MG_PLL_BIAS_BIASCAL_EN |
-				 MG_PLL_BIAS_CTRIM(12) |
-				 MG_PLL_BIAS_VREF_RDAC(4) |
-				 MG_PLL_BIAS_IREFTRIM(iref_trim);
-
-	if (refclk_khz == 38400) {
-		pll_state->mg_pll_tdc_coldst_bias_mask = MG_PLL_TDC_COLDST_COLDSTART;
-		pll_state->mg_pll_bias_mask = 0;
-	} else {
-		pll_state->mg_pll_tdc_coldst_bias_mask = -1U;
-		pll_state->mg_pll_bias_mask = -1U;
-	}
+	/* write pll_state calculations */
+	{
+		pll_state->mg_pll_div0 =
+			(m2div_rem > 0 ? MG_PLL_DIV0_FRACNEN_H : 0) |
+			MG_PLL_DIV0_FBDIV_FRAC(m2div_frac) |
+			MG_PLL_DIV0_FBDIV_INT(m2div_int);
+
+		pll_state->mg_pll_div1 =
+			MG_PLL_DIV1_IREF_NDIVRATIO(iref_ndiv) |
+			MG_PLL_DIV1_DITHER_DIV_2 |
+			MG_PLL_DIV1_NDIVRATIO(1) |
+			MG_PLL_DIV1_FBPREDIV(m1div);
+
+		pll_state->mg_pll_lf =
+			MG_PLL_LF_TDCTARGETCNT(tdc_targetcnt) |
+			MG_PLL_LF_AFCCNTSEL_512 |
+			MG_PLL_LF_GAINCTRL(1) |
+			MG_PLL_LF_INT_COEFF(int_coeff) |
+			MG_PLL_LF_PROP_COEFF(prop_coeff);
+
+		pll_state->mg_pll_frac_lock =
+			MG_PLL_FRAC_LOCK_TRUELOCK_CRIT_32 |
+			MG_PLL_FRAC_LOCK_EARLYLOCK_CRIT_32 |
+			MG_PLL_FRAC_LOCK_LOCKTHRESH(10) |
+			MG_PLL_FRAC_LOCK_DCODITHEREN |
+			MG_PLL_FRAC_LOCK_FEEDFWRDGAIN(feedfwgain);
+		if (use_ssc || m2div_rem > 0)
+			pll_state->mg_pll_frac_lock |=
+				MG_PLL_FRAC_LOCK_FEEDFWRDCAL_EN;
+
+		pll_state->mg_pll_ssc =
+			(use_ssc ? MG_PLL_SSC_EN : 0) |
+			MG_PLL_SSC_TYPE(2) |
+			MG_PLL_SSC_STEPLENGTH(ssc_steplen) |
+			MG_PLL_SSC_STEPNUM(ssc_steplog) |
+			MG_PLL_SSC_FLLEN |
+			MG_PLL_SSC_STEPSIZE(ssc_stepsize);
+
+		pll_state->mg_pll_tdc_coldst_bias =
+			MG_PLL_TDC_COLDST_COLDSTART |
+			MG_PLL_TDC_COLDST_IREFINT_EN |
+			MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(iref_pulse_w) |
+			MG_PLL_TDC_TDCOVCCORR_EN |
+			MG_PLL_TDC_TDCSEL(3);
+
+		pll_state->mg_pll_bias =
+			MG_PLL_BIAS_BIAS_GB_SEL(3) |
+			MG_PLL_BIAS_INIT_DCOAMP(0x3F) |
+			MG_PLL_BIAS_BIAS_BONUS(10) |
+			MG_PLL_BIAS_BIASCAL_EN |
+			MG_PLL_BIAS_CTRIM(12) |
+			MG_PLL_BIAS_VREF_RDAC(4) |
+			MG_PLL_BIAS_IREFTRIM(iref_trim);
+
+		if (refclk_khz == 38400) {
+			pll_state->mg_pll_tdc_coldst_bias_mask =
+				MG_PLL_TDC_COLDST_COLDSTART;
+			pll_state->mg_pll_bias_mask = 0;
+		} else {
+			pll_state->mg_pll_tdc_coldst_bias_mask = -1U;
+			pll_state->mg_pll_bias_mask = -1U;
+		}
 
-	pll_state->mg_pll_tdc_coldst_bias &= pll_state->mg_pll_tdc_coldst_bias_mask;
-	pll_state->mg_pll_bias &= pll_state->mg_pll_bias_mask;
+		pll_state->mg_pll_tdc_coldst_bias &=
+			pll_state->mg_pll_tdc_coldst_bias_mask;
+		pll_state->mg_pll_bias &= pll_state->mg_pll_bias_mask;
+	}
 
 	return true;
 }
-- 
2.21.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-07-25 23:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-25 23:56 [PATCH 0/5] Tiger Lake: DKL phy PLLs Lucas De Marchi
2019-07-25 23:56 ` [PATCH 1/5] drm/i915/tgl: Add DKL phy pll registers Lucas De Marchi
2019-07-25 23:56 ` Lucas De Marchi [this message]
2019-07-25 23:56 ` [PATCH 3/5] drm/i915/tgl: Add DKL phy pll state calculations Lucas De Marchi
2019-07-25 23:56 ` [PATCH 4/5] drm/i915/tgl: start adding the DKL PLLs to use on TC ports Lucas De Marchi
2019-07-25 23:56 ` [PATCH 5/5] drm/i915/tgl: Add support for dkl pll write Lucas De Marchi
2019-07-26  2:23 ` ✓ Fi.CI.BAT: success for Tiger Lake: DKL phy PLLs Patchwork
2019-07-27  2:42 ` ✓ Fi.CI.IGT: " Patchwork
2019-08-12 16:13 ` [PATCH 0/5] " Lucas De Marchi
2019-08-13 21:18 ` Lucas De Marchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190725235643.6870-3-lucas.demarchi@intel.com \
    --to=lucas.demarchi@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox