public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Anshuman Gupta <anshuman.gupta@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com
Subject: [PATCH v5 3/9] drm/i915/tgl: Add power well to enable DC3CO state
Date: Sat, 10 Aug 2019 00:02:17 +0530	[thread overview]
Message-ID: <20190809183223.12031-4-anshuman.gupta@intel.com> (raw)
In-Reply-To: <20190809183223.12031-1-anshuman.gupta@intel.com>

"DC3CO Off" power well inherits its power domains from
"DC Off" power well, these power domains will disallow
DC3CO when any external displays are connected and at
time of modeset and aux programming.
Renaming "DC Off" power well to "DC5 Off" power well.

v2: commit log improvement.
v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
    Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
    Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
    to a appropriate place haswell_crtc_enable(). [Imre]
    Changed the DC3CO power well enabled call back logic as
    recommended in review comments. [Imre]
v4: Used wait_for_us() instead of intel_wait_for_reg(). [Imre (IRC)]
v5: using udelay() instead of waiting for DC3CO exit status.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../drm/i915/display/intel_display_power.c    | 69 ++++++++++++++++++-
 1 file changed, 67 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index e2ef202aeeef..c9e92d48cdab 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -791,7 +791,26 @@ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state)
 	dev_priv->csr.dc_state = val & mask;
 }
 
-static void bxt_enable_dc9(struct drm_i915_private *dev_priv)
+static void tgl_allow_dc3co(struct drm_i915_private *dev_priv)
+{
+	gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO);
+}
+
+static void tgl_disallow_dc3co(struct drm_i915_private *dev_priv)
+{
+	u32 val;
+
+	val = I915_READ(DC_STATE_EN);
+	val &= ~DC_STATE_DC3CO_STATUS;
+	I915_WRITE(DC_STATE_EN, val);
+	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+	/*
+	 * Delay of 200us DC3CO Exit time B.Spec 49196
+	 */
+	udelay(200);
+}
+
+void bxt_enable_dc9(struct drm_i915_private *dev_priv)
 {
 	assert_can_enable_dc9(dev_priv);
 
@@ -1007,6 +1026,33 @@ static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
 		gen9_enable_dc5(dev_priv);
 }
 
+static void tgl_dc3co_power_well_enable(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	tgl_disallow_dc3co(dev_priv);
+}
+
+static void tgl_dc3co_power_well_disable(struct drm_i915_private *dev_priv,
+					 struct i915_power_well *power_well)
+{
+	if (!dev_priv->psr.sink_psr2_support)
+		return;
+
+	if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO)
+		tgl_allow_dc3co(dev_priv);
+}
+
+static bool tgl_dc3co_power_well_enabled(struct drm_i915_private *dev_priv,
+					 struct i915_power_well *power_well)
+{
+	/*
+	 * Checking alone DC_STATE_EN is not enough as DC5 power well also
+	 * allow/disallow DC3CO to make sure both are not enabled at same time
+	 */
+	return ((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC3CO) == 0 &&
+		(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0);
+}
+
 static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv,
 					 struct i915_power_well *power_well)
 {
@@ -2611,6 +2657,12 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
 	BIT_ULL(POWER_DOMAIN_TRANSCODER_VDSC_PW2) |	\
 	BIT_ULL(POWER_DOMAIN_INIT))
 
+#define TGL_DISPLAY_DC3CO_OFF_POWER_DOMAINS (		\
+	TGL_PW_2_POWER_DOMAINS |			\
+	BIT_ULL(POWER_DOMAIN_MODESET) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_A) |			\
+	BIT_ULL(POWER_DOMAIN_INIT))
+
 #define TGL_DISPLAY_DC_OFF_POWER_DOMAINS (		\
 	TGL_PW_2_POWER_DOMAINS |			\
 	BIT_ULL(POWER_DOMAIN_MODESET) |			\
@@ -2715,6 +2767,13 @@ static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
 	.is_enabled = gen9_dc_off_power_well_enabled,
 };
 
+static const struct i915_power_well_ops tgl_dc3co_power_well_ops = {
+	.sync_hw = i9xx_power_well_sync_hw_noop,
+	.enable = tgl_dc3co_power_well_enable,
+	.disable = tgl_dc3co_power_well_disable,
+	.is_enabled = tgl_dc3co_power_well_enabled,
+};
+
 static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
 	.sync_hw = i9xx_power_well_sync_hw_noop,
 	.enable = bxt_dpio_cmn_power_well_enable,
@@ -3626,11 +3685,17 @@ static const struct i915_power_well_desc tgl_power_wells[] = {
 		},
 	},
 	{
-		.name = "DC off",
+		.name = "DC5 off",
 		.domains = TGL_DISPLAY_DC_OFF_POWER_DOMAINS,
 		.ops = &gen9_dc_off_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 	},
+	{
+		.name = "DC3CO off",
+		.domains = TGL_DISPLAY_DC3CO_OFF_POWER_DOMAINS,
+		.ops = &tgl_dc3co_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+	},
 	{
 		.name = "power well 2",
 		.domains = TGL_PW_2_POWER_DOMAINS,
-- 
2.21.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-08-09 18:36 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09 18:32 [PATCH v5 0/9] DC3CO Support for TGL Anshuman Gupta
2019-08-09 18:32 ` [PATCH v5 1/9] drm/i915/tgl: Add DC3CO required register and bits Anshuman Gupta
2019-08-09 18:32 ` [PATCH v5 2/9] drm/i915/tgl: Add DC3CO mask to allowed_dc_mask and gen9_dc_mask Anshuman Gupta
2019-08-09 18:32 ` Anshuman Gupta [this message]
2019-08-11  7:46   ` [PATCH v5 3/9] drm/i915/tgl: Add power well to enable DC3CO state Anshuman Gupta
2019-08-13 14:46   ` Imre Deak
2019-08-27 13:01     ` Gupta, Anshuman
2019-08-27 13:20       ` Imre Deak
2019-08-27 16:17         ` Gupta, Anshuman
2019-08-09 18:32 ` [PATCH v5 4/9] drm/i915/tgl: mutual exclusive handling for DC3CO and DC5/6 Anshuman Gupta
2019-08-13 14:52   ` Imre Deak
2019-08-09 18:32 ` [PATCH v5 5/9] drm/i915/tgl: Add helper function to prefer dc3co over dc5 Anshuman Gupta
2019-08-13 15:47   ` Imre Deak
2019-08-19 12:57     ` Gupta, Anshuman
2019-08-19 13:23       ` Imre Deak
2019-08-14  9:46   ` Imre Deak
2019-08-09 18:32 ` [PATCH v5 6/9] drm/i915/tgl: Add VIDEO power domain Anshuman Gupta
2019-08-09 18:32 ` [PATCH v5 7/9] drm/i915/tgl: DC3CO PSR2 helper Anshuman Gupta
2019-08-13 16:05   ` Imre Deak
2019-08-09 18:32 ` [PATCH v5 8/9] drm/i915/tgl: switch between dc3co and dc5 based on display idleness Anshuman Gupta
2019-08-10  6:17   ` kbuild test robot
2019-08-10  6:32   ` kbuild test robot
2019-08-09 18:32 ` [PATCH v5 9/9] drm/i915/tgl: Add DC3CO counter in i915_dmc_info Anshuman Gupta
2019-08-09 19:13 ` ✗ Fi.CI.CHECKPATCH: warning for DC3CO Support for TGL (rev2) Patchwork
2019-08-09 19:17 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-09 19:33 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-10 16:18 ` ✗ Fi.CI.IGT: failure " Patchwork
2019-08-11  8:12 ` ✗ Fi.CI.CHECKPATCH: warning for DC3CO Support for TGL (rev3) Patchwork
2019-08-11  8:16 ` ✗ Fi.CI.SPARSE: " Patchwork
2019-08-11  8:37 ` ✓ Fi.CI.BAT: success " Patchwork
2019-08-11 15:08 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809183223.12031-4-anshuman.gupta@intel.com \
    --to=anshuman.gupta@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox