public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 4/4] drm/i915: Remove begin/finish_crtc_commit, v2.
Date: Wed, 25 Sep 2019 16:59:01 +0200	[thread overview]
Message-ID: <20190925145901.3943-4-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20190925145901.3943-1-maarten.lankhorst@linux.intel.com>

This can all be done from the intel_update_crtc function. Split out the
pipe update into a separate function, just like is done for the planes.
Pull in all the changes done during fastset as well. It makes no sense
for it to still exist as a separate function.

Changes since v1:
- Inline intel_update_pipe_config()

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 197 ++++++++-----------
 1 file changed, 86 insertions(+), 111 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index b77574cda648..5a9d06af9f29 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -136,8 +136,6 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
 			    const struct intel_crtc_state *pipe_config);
 static void chv_prepare_pll(struct intel_crtc *crtc,
 			    const struct intel_crtc_state *pipe_config);
-static void intel_begin_crtc_commit(struct intel_atomic_state *, struct intel_crtc *);
-static void intel_finish_crtc_commit(struct intel_atomic_state *, struct intel_crtc *);
 static void intel_crtc_init_scalers(struct intel_crtc *crtc,
 				    struct intel_crtc_state *crtc_state);
 static void skylake_pfit_enable(const struct intel_crtc_state *crtc_state);
@@ -4409,45 +4407,6 @@ static void icl_set_pipe_chicken(struct intel_crtc *crtc)
 	I915_WRITE(PIPE_CHICKEN(pipe), tmp);
 }
 
-static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
-				     const struct intel_crtc_state *new_crtc_state)
-{
-	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
-	/* drm_atomic_helper_update_legacy_modeset_state might not be called. */
-	crtc->base.mode = new_crtc_state->uapi.mode;
-
-	/*
-	 * Update pipe size and adjust fitter if needed: the reason for this is
-	 * that in compute_mode_changes we check the native mode (not the pfit
-	 * mode) to see if we can flip rather than do a full mode set. In the
-	 * fastboot case, we'll flip, but if we don't update the pipesrc and
-	 * pfit state, we'll end up with a big fb scanned out into the wrong
-	 * sized surface.
-	 */
-
-	I915_WRITE(PIPESRC(crtc->pipe),
-		   ((new_crtc_state->pipe_src_w - 1) << 16) |
-		   (new_crtc_state->pipe_src_h - 1));
-
-	/* on skylake this is done by detaching scalers */
-	if (INTEL_GEN(dev_priv) >= 9) {
-		skl_detach_scalers(new_crtc_state);
-
-		if (new_crtc_state->pch_pfit.enabled)
-			skylake_pfit_enable(new_crtc_state);
-	} else if (HAS_PCH_SPLIT(dev_priv)) {
-		if (new_crtc_state->pch_pfit.enabled)
-			ironlake_pfit_enable(new_crtc_state);
-		else if (old_crtc_state->pch_pfit.enabled)
-			ironlake_pfit_disable(old_crtc_state);
-	}
-
-	if (INTEL_GEN(dev_priv) >= 11)
-		icl_set_pipe_chicken(crtc);
-}
-
 static void intel_fdi_normal_train(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -13739,13 +13698,88 @@ u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
 	return crtc->base.funcs->get_vblank_counter(&crtc->base);
 }
 
+void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
+				  struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+
+	if (!IS_GEN(dev_priv, 2))
+		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
+
+	if (crtc_state->has_pch_encoder) {
+		enum pipe pch_transcoder =
+			intel_crtc_pch_transcoder(crtc);
+
+		intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
+	}
+}
+
+static void commit_pipe_config(struct intel_atomic_state *state,
+			       struct intel_crtc_state *old_crtc_state,
+			       struct intel_crtc_state *new_crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	bool modeset = needs_modeset(new_crtc_state);
+
+	if (!modeset) {
+		if (new_crtc_state->uapi.color_mgmt_changed ||
+		    new_crtc_state->update_pipe)
+			intel_color_commit(new_crtc_state);
+
+		if (INTEL_GEN(dev_priv) >= 9)
+			skl_detach_scalers(new_crtc_state);
+
+		if (new_crtc_state->update_pipe) {
+			/* drm_atomic_helper_update_legacy_modeset_state might not be called. */
+			crtc->base.mode = new_crtc_state->uapi.mode;
+
+			/*
+			 * Update pipe size and adjust fitter if needed: the reason for this is
+			 * that in compute_mode_changes we check the native mode (not the pfit
+			 * mode) to see if we can flip rather than do a full mode set. In the
+			 * fastboot case, we'll flip, but if we don't update the pipesrc and
+			 * pfit state, we'll end up with a big fb scanned out into the wrong
+			 * sized surface.
+			 */
+
+			I915_WRITE(PIPESRC(crtc->pipe),
+				  ((new_crtc_state->pipe_src_w - 1) << 16) |
+				  (new_crtc_state->pipe_src_h - 1));
+
+			if (INTEL_GEN(dev_priv) >= 9) {
+				/*
+				 * enable pipe scaler here if needed, if
+				 * it's disabled, that's done by
+				 * skl_detach_scalers() above.
+				 */
+				skylake_pfit_enable(new_crtc_state);
+			} else if (HAS_PCH_SPLIT(dev_priv)) {
+				if (!new_crtc_state->pch_pfit.enabled)
+					ironlake_pfit_disable(old_crtc_state);
+				else
+					ironlake_pfit_enable(new_crtc_state);
+			}
+
+			if (INTEL_GEN(dev_priv) >= 11)
+				icl_set_pipe_chicken(crtc);
+		}
+
+		if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
+			bdw_set_pipemisc(new_crtc_state);
+	}
+
+	if (dev_priv->display.atomic_update_watermarks)
+		dev_priv->display.atomic_update_watermarks(state,
+							   new_crtc_state);
+}
+
 static void intel_update_crtc(struct intel_crtc *crtc,
 			      struct intel_atomic_state *state,
 			      struct intel_crtc_state *old_crtc_state,
 			      struct intel_crtc_state *new_crtc_state)
 {
-	struct drm_device *dev = state->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
 	bool modeset = needs_modeset(new_crtc_state);
 	struct intel_plane_state *new_plane_state =
 		intel_atomic_get_new_plane_state(state,
@@ -13769,14 +13803,21 @@ static void intel_update_crtc(struct intel_crtc *crtc,
 	else if (new_plane_state)
 		intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
 
-	intel_begin_crtc_commit(state, crtc);
+	/* Perform vblank evasion around commit operation */
+	intel_pipe_update_start(new_crtc_state);
+
+	commit_pipe_config(state, old_crtc_state, new_crtc_state);
 
 	if (INTEL_GEN(dev_priv) >= 9)
 		skl_update_planes_on_crtc(state, crtc);
 	else
 		i9xx_update_planes_on_crtc(state, crtc);
 
-	intel_finish_crtc_commit(state, crtc);
+	intel_pipe_update_end(new_crtc_state);
+
+	if (new_crtc_state->update_pipe && !modeset &&
+	    old_crtc_state->hw.mode.private_flags & I915_MODE_FLAG_INHERITED)
+		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
 }
 
 static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
@@ -14573,72 +14614,6 @@ skl_max_scale(const struct intel_crtc_state *crtc_state,
 	return max_scale;
 }
 
-static void intel_begin_crtc_commit(struct intel_atomic_state *state,
-				    struct intel_crtc *crtc)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	struct intel_crtc_state *old_crtc_state =
-		intel_atomic_get_old_crtc_state(state, crtc);
-	struct intel_crtc_state *new_crtc_state =
-		intel_atomic_get_new_crtc_state(state, crtc);
-	bool modeset = needs_modeset(new_crtc_state);
-
-	/* Perform vblank evasion around commit operation */
-	intel_pipe_update_start(new_crtc_state);
-
-	if (modeset)
-		goto out;
-
-	if (new_crtc_state->uapi.color_mgmt_changed ||
-	    new_crtc_state->update_pipe)
-		intel_color_commit(new_crtc_state);
-
-	if (new_crtc_state->update_pipe)
-		intel_update_pipe_config(old_crtc_state, new_crtc_state);
-	else if (INTEL_GEN(dev_priv) >= 9)
-		skl_detach_scalers(new_crtc_state);
-
-	if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
-		bdw_set_pipemisc(new_crtc_state);
-
-out:
-	if (dev_priv->display.atomic_update_watermarks)
-		dev_priv->display.atomic_update_watermarks(state,
-							   new_crtc_state);
-}
-
-void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
-				  struct intel_crtc_state *crtc_state)
-{
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-
-	if (!IS_GEN(dev_priv, 2))
-		intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
-
-	if (crtc_state->has_pch_encoder) {
-		enum pipe pch_transcoder =
-			intel_crtc_pch_transcoder(crtc);
-
-		intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
-	}
-}
-
-static void intel_finish_crtc_commit(struct intel_atomic_state *state,
-				     struct intel_crtc *crtc)
-{
-	struct intel_crtc_state *old_crtc_state =
-		intel_atomic_get_old_crtc_state(state, crtc);
-	struct intel_crtc_state *new_crtc_state =
-		intel_atomic_get_new_crtc_state(state, crtc);
-
-	intel_pipe_update_end(new_crtc_state);
-
-	if (new_crtc_state->update_pipe &&
-	    !needs_modeset(new_crtc_state) &&
-	    old_crtc_state->hw.mode.private_flags & I915_MODE_FLAG_INHERITED)
-		intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
-}
-
 /**
  * intel_plane_destroy - destroy a plane
  * @plane: plane to destroy
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2019-09-25 14:59 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-25 14:58 [PATCH 1/4] drm/i915: Prepare to split crtc state in uapi and hw state Maarten Lankhorst
2019-09-25 14:58 ` [PATCH 2/4] drm/i915: Handle a few more cases for hw/sw split Maarten Lankhorst
2019-09-25 14:59 ` [PATCH 3/4] drm/i915: Complete sw/hw split, v2 Maarten Lankhorst
2019-09-25 21:41   ` Matt Roper
2019-09-25 14:59 ` Maarten Lankhorst [this message]
2019-09-25 15:23   ` [PATCH 4/4] drm/i915: Remove begin/finish_crtc_commit, v2 Ville Syrjälä
2019-09-25 21:42   ` Matt Roper
2019-09-26  8:46     ` Maarten Lankhorst
2019-09-26  9:22     ` Maarten Lankhorst
2019-09-26  9:47     ` [PATCH] drm/i915: Remove begin/finish_crtc_commit, v3 Maarten Lankhorst
2019-09-26 16:22       ` Ville Syrjälä
2019-09-27  8:29         ` Maarten Lankhorst
2019-09-26 12:45     ` [PATCH 4/4] drm/i915: Remove begin/finish_crtc_commit, v2 Ville Syrjälä
2019-09-25 16:47 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/4] drm/i915: Prepare to split crtc state in uapi and hw state Patchwork
2019-09-25 17:15 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-26  9:29 ` ✓ Fi.CI.IGT: " Patchwork
2019-09-26 10:08 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/4] drm/i915: Prepare to split crtc state in uapi and hw state (rev2) Patchwork
2019-09-26 10:42 ` ✓ Fi.CI.BAT: success " Patchwork
2019-09-27  6:18 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190925145901.3943-4-maarten.lankhorst@linux.intel.com \
    --to=maarten.lankhorst@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox