From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 2/5] drm/i915: Switch to intel_ types in debugfs display_info
Date: Tue, 29 Oct 2019 17:16:11 +0200 [thread overview]
Message-ID: <20191029151614.16929-2-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20191029151614.16929-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Switch to using intel_ types in the debugfs display_info code.
Should make it easier to handle bigjoiner etc. in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 119 ++++++++++++++--------------
1 file changed, 59 insertions(+), 60 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 8365c0b15e9d..6335bfbe4a06 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2367,7 +2367,7 @@ static int i915_dmc_info(struct seq_file *m, void *unused)
}
static void intel_seq_print_mode(struct seq_file *m, int tabs,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
int i;
@@ -2378,51 +2378,52 @@ static void intel_seq_print_mode(struct seq_file *m, int tabs,
}
static void intel_encoder_info(struct seq_file *m,
- struct intel_crtc *intel_crtc,
- struct intel_encoder *intel_encoder)
+ struct intel_crtc *crtc,
+ struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
struct drm_device *dev = &dev_priv->drm;
- struct drm_crtc *crtc = &intel_crtc->base;
- struct intel_connector *intel_connector;
- struct drm_encoder *encoder;
+ struct intel_connector *connector;
- encoder = &intel_encoder->base;
seq_printf(m, "\tencoder %d: type: %s, connectors:\n",
- encoder->base.id, encoder->name);
- for_each_connector_on_encoder(dev, encoder, intel_connector) {
- struct drm_connector *connector = &intel_connector->base;
+ encoder->base.base.id, encoder->base.name);
+
+ for_each_connector_on_encoder(dev, &encoder->base, connector) {
seq_printf(m, "\t\tconnector %d: type: %s, status: %s",
- connector->base.id,
- connector->name,
- drm_get_connector_status_name(connector->status));
- if (connector->status == connector_status_connected) {
- struct drm_display_mode *mode = &crtc->mode;
+ connector->base.base.id, connector->base.name,
+ drm_get_connector_status_name(connector->base.status));
+
+ if (connector->base.status == connector_status_connected) {
+ const struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+
seq_printf(m, ", mode:\n");
- intel_seq_print_mode(m, 2, mode);
+ intel_seq_print_mode(m, 2, &crtc_state->base.mode);
} else {
seq_putc(m, '\n');
}
}
}
-static void intel_crtc_info(struct seq_file *m, struct intel_crtc *intel_crtc)
+static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
struct drm_device *dev = &dev_priv->drm;
- struct drm_crtc *crtc = &intel_crtc->base;
- struct intel_encoder *intel_encoder;
- struct drm_plane_state *plane_state = crtc->primary->state;
- struct drm_framebuffer *fb = plane_state->fb;
+ struct intel_encoder *encoder;
+ struct intel_plane *plane = to_intel_plane(crtc->base.primary);
+ const struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
+ const struct drm_framebuffer *fb = plane_state->base.fb;
if (fb)
seq_printf(m, "\tfb: %d, pos: %dx%d, size: %dx%d\n",
- fb->base.id, plane_state->src_x >> 16,
- plane_state->src_y >> 16, fb->width, fb->height);
+ fb->base.id, plane_state->base.src_x >> 16,
+ plane_state->base.src_y >> 16,
+ fb->width, fb->height);
else
seq_puts(m, "\tprimary plane disabled\n");
- for_each_encoder_on_crtc(dev, crtc, intel_encoder)
- intel_encoder_info(m, intel_crtc, intel_encoder);
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ intel_encoder_info(m, crtc, encoder);
}
static void intel_panel_info(struct seq_file *m, struct intel_panel *panel)
@@ -2589,66 +2590,63 @@ static void plane_rotation(char *buf, size_t bufsize, unsigned int rotation)
rotation);
}
-static void intel_plane_info(struct seq_file *m, struct intel_crtc *intel_crtc)
+static void intel_plane_info(struct seq_file *m, struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
struct drm_device *dev = &dev_priv->drm;
- struct intel_plane *intel_plane;
+ struct intel_plane *plane;
- for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
- struct drm_plane_state *state;
- struct drm_plane *plane = &intel_plane->base;
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ const struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
+ const struct drm_framebuffer *fb;
struct drm_format_name_buf format_name;
struct drm_rect src, dst;
char rot_str[48];
- if (!plane->state) {
+ if (!plane_state) {
seq_puts(m, "plane->state is NULL!\n");
continue;
}
- state = plane->state;
-
- src = drm_plane_state_src(state);
- dst = drm_plane_state_dest(state);
+ src = drm_plane_state_src(&plane_state->base);
+ dst = drm_plane_state_dest(&plane_state->base);
+ fb = plane_state->base.fb;
- if (state->fb) {
- drm_get_format_name(state->fb->format->format,
- &format_name);
- } else {
+ if (fb)
+ drm_get_format_name(fb->format->format, &format_name);
+ else
sprintf(format_name.str, "N/A");
- }
- plane_rotation(rot_str, sizeof(rot_str), state->rotation);
+ plane_rotation(rot_str, sizeof(rot_str),
+ plane_state->base.rotation);
seq_printf(m, "\t--Plane id %d: type=%s, dst=" DRM_RECT_FMT ", src=" DRM_RECT_FP_FMT ", format=%s, rotation=%s\n",
- plane->base.id,
- plane_type(intel_plane->base.type),
+ plane->base.base.id,
+ plane_type(plane->base.type),
DRM_RECT_ARG(&dst),
DRM_RECT_FP_ARG(&src),
- format_name.str,
- rot_str);
+ format_name.str, rot_str);
}
}
-static void intel_scaler_info(struct seq_file *m, struct intel_crtc *intel_crtc)
+static void intel_scaler_info(struct seq_file *m, struct intel_crtc *crtc)
{
- struct intel_crtc_state *pipe_config;
- int num_scalers = intel_crtc->num_scalers;
+ const struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+ int num_scalers = crtc->num_scalers;
int i;
- pipe_config = to_intel_crtc_state(intel_crtc->base.state);
-
/* Not all platformas have a scaler */
if (num_scalers) {
seq_printf(m, "\tnum_scalers=%d, scaler_users=%x scaler_id=%d",
num_scalers,
- pipe_config->scaler_state.scaler_users,
- pipe_config->scaler_state.scaler_id);
+ crtc_state->scaler_state.scaler_users,
+ crtc_state->scaler_state.scaler_id);
for (i = 0; i < num_scalers; i++) {
- struct intel_scaler *sc =
- &pipe_config->scaler_state.scalers[i];
+ const struct intel_scaler *sc =
+ &crtc_state->scaler_state.scalers[i];
seq_printf(m, ", scalers[%d]: use=%s, mode=%x",
i, yesno(sc->in_use), sc->mode);
@@ -2673,18 +2671,19 @@ static int i915_display_info(struct seq_file *m, void *unused)
seq_printf(m, "CRTC info\n");
seq_printf(m, "---------\n");
for_each_intel_crtc(dev, crtc) {
- struct intel_crtc_state *pipe_config;
+ const struct intel_crtc_state *crtc_state;
drm_modeset_lock(&crtc->base.mutex, NULL);
- pipe_config = to_intel_crtc_state(crtc->base.state);
+
+ crtc_state = to_intel_crtc_state(crtc->base.state);
seq_printf(m, "CRTC %d: pipe: %c, active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
crtc->base.base.id, pipe_name(crtc->pipe),
- yesno(pipe_config->base.active),
- pipe_config->pipe_src_w, pipe_config->pipe_src_h,
- yesno(pipe_config->dither), pipe_config->pipe_bpp);
+ yesno(crtc_state->base.active),
+ crtc_state->pipe_src_w, crtc_state->pipe_src_h,
+ yesno(crtc_state->dither), crtc_state->pipe_bpp);
- if (pipe_config->base.active) {
+ if (crtc_state->base.active) {
struct intel_plane *cursor =
to_intel_plane(crtc->base.cursor);
--
2.23.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
WARNING: multiple messages have this Message-ID (diff)
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 2/5] drm/i915: Switch to intel_ types in debugfs display_info
Date: Tue, 29 Oct 2019 17:16:11 +0200 [thread overview]
Message-ID: <20191029151614.16929-2-ville.syrjala@linux.intel.com> (raw)
Message-ID: <20191029151611.5Dcwo6G5qC3YffYIFXUY8bDrQrfn7R3BASsqoh6MtTg@z> (raw)
In-Reply-To: <20191029151614.16929-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Switch to using intel_ types in the debugfs display_info code.
Should make it easier to handle bigjoiner etc. in the future.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 119 ++++++++++++++--------------
1 file changed, 59 insertions(+), 60 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 8365c0b15e9d..6335bfbe4a06 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2367,7 +2367,7 @@ static int i915_dmc_info(struct seq_file *m, void *unused)
}
static void intel_seq_print_mode(struct seq_file *m, int tabs,
- struct drm_display_mode *mode)
+ const struct drm_display_mode *mode)
{
int i;
@@ -2378,51 +2378,52 @@ static void intel_seq_print_mode(struct seq_file *m, int tabs,
}
static void intel_encoder_info(struct seq_file *m,
- struct intel_crtc *intel_crtc,
- struct intel_encoder *intel_encoder)
+ struct intel_crtc *crtc,
+ struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
struct drm_device *dev = &dev_priv->drm;
- struct drm_crtc *crtc = &intel_crtc->base;
- struct intel_connector *intel_connector;
- struct drm_encoder *encoder;
+ struct intel_connector *connector;
- encoder = &intel_encoder->base;
seq_printf(m, "\tencoder %d: type: %s, connectors:\n",
- encoder->base.id, encoder->name);
- for_each_connector_on_encoder(dev, encoder, intel_connector) {
- struct drm_connector *connector = &intel_connector->base;
+ encoder->base.base.id, encoder->base.name);
+
+ for_each_connector_on_encoder(dev, &encoder->base, connector) {
seq_printf(m, "\t\tconnector %d: type: %s, status: %s",
- connector->base.id,
- connector->name,
- drm_get_connector_status_name(connector->status));
- if (connector->status == connector_status_connected) {
- struct drm_display_mode *mode = &crtc->mode;
+ connector->base.base.id, connector->base.name,
+ drm_get_connector_status_name(connector->base.status));
+
+ if (connector->base.status == connector_status_connected) {
+ const struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+
seq_printf(m, ", mode:\n");
- intel_seq_print_mode(m, 2, mode);
+ intel_seq_print_mode(m, 2, &crtc_state->base.mode);
} else {
seq_putc(m, '\n');
}
}
}
-static void intel_crtc_info(struct seq_file *m, struct intel_crtc *intel_crtc)
+static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
struct drm_device *dev = &dev_priv->drm;
- struct drm_crtc *crtc = &intel_crtc->base;
- struct intel_encoder *intel_encoder;
- struct drm_plane_state *plane_state = crtc->primary->state;
- struct drm_framebuffer *fb = plane_state->fb;
+ struct intel_encoder *encoder;
+ struct intel_plane *plane = to_intel_plane(crtc->base.primary);
+ const struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
+ const struct drm_framebuffer *fb = plane_state->base.fb;
if (fb)
seq_printf(m, "\tfb: %d, pos: %dx%d, size: %dx%d\n",
- fb->base.id, plane_state->src_x >> 16,
- plane_state->src_y >> 16, fb->width, fb->height);
+ fb->base.id, plane_state->base.src_x >> 16,
+ plane_state->base.src_y >> 16,
+ fb->width, fb->height);
else
seq_puts(m, "\tprimary plane disabled\n");
- for_each_encoder_on_crtc(dev, crtc, intel_encoder)
- intel_encoder_info(m, intel_crtc, intel_encoder);
+ for_each_encoder_on_crtc(dev, &crtc->base, encoder)
+ intel_encoder_info(m, crtc, encoder);
}
static void intel_panel_info(struct seq_file *m, struct intel_panel *panel)
@@ -2589,66 +2590,63 @@ static void plane_rotation(char *buf, size_t bufsize, unsigned int rotation)
rotation);
}
-static void intel_plane_info(struct seq_file *m, struct intel_crtc *intel_crtc)
+static void intel_plane_info(struct seq_file *m, struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = node_to_i915(m->private);
struct drm_device *dev = &dev_priv->drm;
- struct intel_plane *intel_plane;
+ struct intel_plane *plane;
- for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
- struct drm_plane_state *state;
- struct drm_plane *plane = &intel_plane->base;
+ for_each_intel_plane_on_crtc(dev, crtc, plane) {
+ const struct intel_plane_state *plane_state =
+ to_intel_plane_state(plane->base.state);
+ const struct drm_framebuffer *fb;
struct drm_format_name_buf format_name;
struct drm_rect src, dst;
char rot_str[48];
- if (!plane->state) {
+ if (!plane_state) {
seq_puts(m, "plane->state is NULL!\n");
continue;
}
- state = plane->state;
-
- src = drm_plane_state_src(state);
- dst = drm_plane_state_dest(state);
+ src = drm_plane_state_src(&plane_state->base);
+ dst = drm_plane_state_dest(&plane_state->base);
+ fb = plane_state->base.fb;
- if (state->fb) {
- drm_get_format_name(state->fb->format->format,
- &format_name);
- } else {
+ if (fb)
+ drm_get_format_name(fb->format->format, &format_name);
+ else
sprintf(format_name.str, "N/A");
- }
- plane_rotation(rot_str, sizeof(rot_str), state->rotation);
+ plane_rotation(rot_str, sizeof(rot_str),
+ plane_state->base.rotation);
seq_printf(m, "\t--Plane id %d: type=%s, dst=" DRM_RECT_FMT ", src=" DRM_RECT_FP_FMT ", format=%s, rotation=%s\n",
- plane->base.id,
- plane_type(intel_plane->base.type),
+ plane->base.base.id,
+ plane_type(plane->base.type),
DRM_RECT_ARG(&dst),
DRM_RECT_FP_ARG(&src),
- format_name.str,
- rot_str);
+ format_name.str, rot_str);
}
}
-static void intel_scaler_info(struct seq_file *m, struct intel_crtc *intel_crtc)
+static void intel_scaler_info(struct seq_file *m, struct intel_crtc *crtc)
{
- struct intel_crtc_state *pipe_config;
- int num_scalers = intel_crtc->num_scalers;
+ const struct intel_crtc_state *crtc_state =
+ to_intel_crtc_state(crtc->base.state);
+ int num_scalers = crtc->num_scalers;
int i;
- pipe_config = to_intel_crtc_state(intel_crtc->base.state);
-
/* Not all platformas have a scaler */
if (num_scalers) {
seq_printf(m, "\tnum_scalers=%d, scaler_users=%x scaler_id=%d",
num_scalers,
- pipe_config->scaler_state.scaler_users,
- pipe_config->scaler_state.scaler_id);
+ crtc_state->scaler_state.scaler_users,
+ crtc_state->scaler_state.scaler_id);
for (i = 0; i < num_scalers; i++) {
- struct intel_scaler *sc =
- &pipe_config->scaler_state.scalers[i];
+ const struct intel_scaler *sc =
+ &crtc_state->scaler_state.scalers[i];
seq_printf(m, ", scalers[%d]: use=%s, mode=%x",
i, yesno(sc->in_use), sc->mode);
@@ -2673,18 +2671,19 @@ static int i915_display_info(struct seq_file *m, void *unused)
seq_printf(m, "CRTC info\n");
seq_printf(m, "---------\n");
for_each_intel_crtc(dev, crtc) {
- struct intel_crtc_state *pipe_config;
+ const struct intel_crtc_state *crtc_state;
drm_modeset_lock(&crtc->base.mutex, NULL);
- pipe_config = to_intel_crtc_state(crtc->base.state);
+
+ crtc_state = to_intel_crtc_state(crtc->base.state);
seq_printf(m, "CRTC %d: pipe: %c, active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
crtc->base.base.id, pipe_name(crtc->pipe),
- yesno(pipe_config->base.active),
- pipe_config->pipe_src_w, pipe_config->pipe_src_h,
- yesno(pipe_config->dither), pipe_config->pipe_bpp);
+ yesno(crtc_state->base.active),
+ crtc_state->pipe_src_w, crtc_state->pipe_src_h,
+ yesno(crtc_state->dither), crtc_state->pipe_bpp);
- if (pipe_config->base.active) {
+ if (crtc_state->base.active) {
struct intel_plane *cursor =
to_intel_plane(crtc->base.cursor);
--
2.23.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-10-29 15:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 15:16 [PATCH 1/5] drm/i915: Use drm_rect to simplify plane {crtc, src}_{x, y, w, h} printing Ville Syrjala
2019-10-29 15:16 ` [Intel-gfx] " Ville Syrjala
2019-10-29 15:16 ` Ville Syrjala [this message]
2019-10-29 15:16 ` [Intel-gfx] [PATCH 2/5] drm/i915: Switch to intel_ types in debugfs display_info Ville Syrjala
2019-10-29 15:16 ` [PATCH 3/5] drm/i915: Reorganize plane/fb dump in debugfs Ville Syrjala
2019-10-29 15:16 ` [Intel-gfx] " Ville Syrjala
2019-10-29 15:16 ` [PATCH 4/5] drm/i915: Refactor debugfs display info code Ville Syrjala
2019-10-29 15:16 ` [Intel-gfx] " Ville Syrjala
2019-10-29 15:16 ` [PATCH 5/5] drm/i915: Dump the mode for the crtc just the once Ville Syrjala
2019-10-29 15:16 ` [Intel-gfx] " Ville Syrjala
2019-10-29 20:00 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/5] drm/i915: Use drm_rect to simplify plane {crtc, src}_{x, y, w, h} printing Patchwork
2019-10-29 20:00 ` [Intel-gfx] " Patchwork
2019-10-29 20:21 ` ✓ Fi.CI.BAT: success " Patchwork
2019-10-29 20:21 ` [Intel-gfx] " Patchwork
2019-10-30 15:50 ` ✗ Fi.CI.IGT: failure " Patchwork
2019-10-30 15:50 ` [Intel-gfx] " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029151614.16929-2-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox