From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v2] drm/i915: update rawclk also on resume
Date: Mon, 4 Nov 2019 17:31:28 +0200 [thread overview]
Message-ID: <20191104153128.GK1208@intel.com> (raw)
In-Reply-To: <20191101142024.13877-1-jani.nikula@intel.com>
On Fri, Nov 01, 2019 at 04:20:24PM +0200, Jani Nikula wrote:
> Since CNP it's possible for rawclk to have two different values, 19.2
> and 24 MHz. If the value indicated by SFUSE_STRAP register is different
> from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
> mismatch between the rawclk hardware and software states after
> suspend/resume. On previous platforms this used to work by accident,
> because the power on defaults worked just fine.
>
> Update the rawclk also on resume. The natural place to do this would be
> intel_modeset_init_hw(), however VLV/CHV need it done before
> intel_power_domains_init_hw(). Thus put it there even if it feels
> slightly out of place.
>
> v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
> platforms (Ville).
>
> Reported-by: Shawn Lee <shawn.c.lee@intel.com>
> Cc: Shawn Lee <shawn.c.lee@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display_power.c | 3 +++
> drivers/gpu/drm/i915/i915_drv.c | 3 ---
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
> index 707ac110e271..ce1b64f4dd44 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> @@ -5015,6 +5015,9 @@ void intel_power_domains_init_hw(struct drm_i915_private *i915, bool resume)
>
> power_domains->initializing = true;
>
> + /* Must happen before power domain init on VLV/CHV */
> + intel_update_rawclk(i915);
> +
> if (INTEL_GEN(i915) >= 11) {
> icl_display_core_init(i915, resume);
> } else if (IS_CANNONLAKE(i915)) {
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 3340485c12e3..71944399dcfc 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -296,9 +296,6 @@ static int i915_driver_modeset_probe(struct drm_i915_private *i915)
> if (ret)
> goto cleanup_vga_client;
>
> - /* must happen before intel_power_domains_init_hw() on VLV/CHV */
> - intel_update_rawclk(i915);
> -
> intel_power_domains_init_hw(i915, false);
>
> intel_csr_ucode_init(i915);
> --
> 2.20.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
WARNING: multiple messages have this Message-ID (diff)
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Jani Nikula <jani.nikula@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2] drm/i915: update rawclk also on resume
Date: Mon, 4 Nov 2019 17:31:28 +0200 [thread overview]
Message-ID: <20191104153128.GK1208@intel.com> (raw)
Message-ID: <20191104153128.uHOwf8MlRyG8XhyzQbmdX6fBeeAFzVb0eRtIjktz-Yw@z> (raw)
In-Reply-To: <20191101142024.13877-1-jani.nikula@intel.com>
On Fri, Nov 01, 2019 at 04:20:24PM +0200, Jani Nikula wrote:
> Since CNP it's possible for rawclk to have two different values, 19.2
> and 24 MHz. If the value indicated by SFUSE_STRAP register is different
> from the power on default for PCH_RAWCLK_FREQ, we'll end up having a
> mismatch between the rawclk hardware and software states after
> suspend/resume. On previous platforms this used to work by accident,
> because the power on defaults worked just fine.
>
> Update the rawclk also on resume. The natural place to do this would be
> intel_modeset_init_hw(), however VLV/CHV need it done before
> intel_power_domains_init_hw(). Thus put it there even if it feels
> slightly out of place.
>
> v2: Call intel_update_rawclck() in intel_power_domains_init_hw() for all
> platforms (Ville).
>
> Reported-by: Shawn Lee <shawn.c.lee@intel.com>
> Cc: Shawn Lee <shawn.c.lee@intel.com>
> Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display_power.c | 3 +++
> drivers/gpu/drm/i915/i915_drv.c | 3 ---
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
> index 707ac110e271..ce1b64f4dd44 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> @@ -5015,6 +5015,9 @@ void intel_power_domains_init_hw(struct drm_i915_private *i915, bool resume)
>
> power_domains->initializing = true;
>
> + /* Must happen before power domain init on VLV/CHV */
> + intel_update_rawclk(i915);
> +
> if (INTEL_GEN(i915) >= 11) {
> icl_display_core_init(i915, resume);
> } else if (IS_CANNONLAKE(i915)) {
> diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
> index 3340485c12e3..71944399dcfc 100644
> --- a/drivers/gpu/drm/i915/i915_drv.c
> +++ b/drivers/gpu/drm/i915/i915_drv.c
> @@ -296,9 +296,6 @@ static int i915_driver_modeset_probe(struct drm_i915_private *i915)
> if (ret)
> goto cleanup_vga_client;
>
> - /* must happen before intel_power_domains_init_hw() on VLV/CHV */
> - intel_update_rawclk(i915);
> -
> intel_power_domains_init_hw(i915, false);
>
> intel_csr_ucode_init(i915);
> --
> 2.20.1
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-11-04 15:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-01 14:20 [PATCH v2] drm/i915: update rawclk also on resume Jani Nikula
2019-11-01 14:20 ` [Intel-gfx] " Jani Nikula
2019-11-01 17:58 ` ✓ Fi.CI.BAT: success for drm/i915: update rawclk also on resume (rev4) Patchwork
2019-11-01 17:58 ` [Intel-gfx] " Patchwork
2019-11-03 3:44 ` ✓ Fi.CI.IGT: " Patchwork
2019-11-03 3:44 ` [Intel-gfx] " Patchwork
2019-11-04 15:31 ` Ville Syrjälä [this message]
2019-11-04 15:31 ` [Intel-gfx] [PATCH v2] drm/i915: update rawclk also on resume Ville Syrjälä
2019-11-05 7:31 ` Jani Nikula
2019-11-05 7:31 ` [Intel-gfx] " Jani Nikula
-- strict thread matches above, loose matches on Subject: below --
2019-10-31 11:14 [PATCH] " Jani Nikula
2019-11-01 14:45 ` [PATCH v2] " Lee Shawn C
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191104153128.GK1208@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox