Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Manasi Navare <manasi.d.navare@intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 1/2] drm/i915/dp: Do not set master_trans bit in bitmak if INVALID_TRANSCODER
Date: Thu, 23 Jan 2020 14:04:26 -0800	[thread overview]
Message-ID: <20200123220426.GB4379@intel.com> (raw)
In-Reply-To: <20200123140128.GR13686@intel.com>

On Thu, Jan 23, 2020 at 04:01:28PM +0200, Ville Syrjälä wrote:
> On Wed, Jan 22, 2020 at 04:24:14PM -0800, Manasi Navare wrote:
> > In the port sync mode, for the master crtc, the master_transcoder is INVALID.
> > In that case since its value is -1, do not set the bit in the bitmask.
> > 
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Fixes: d0eed1545fe7 ("drm/i915: Fix post-fastset modeset check for port sync")
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> 
> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Thanks for the review, I think populating master transcoder in master would also need us
to change all the helpers for is_trans_port_sync_mode and the readout and the commit_modeset_enables logic.
Its doable but too risky to change at this point incase it causes any regressions.

Still assume your r-b on this?

Manasi
> 
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 6 ++++--
> >  1 file changed, 4 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 878d331b9e8c..79f9054078ea 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -14649,8 +14649,10 @@ static int intel_atomic_check(struct drm_device *dev,
> >  		}
> >  
> >  		if (is_trans_port_sync_mode(new_crtc_state)) {
> > -			u8 trans = new_crtc_state->sync_mode_slaves_mask |
> > -				   BIT(new_crtc_state->master_transcoder);
> > +			u8 trans = new_crtc_state->sync_mode_slaves_mask;
> > +
> > +			if (new_crtc_state->master_transcoder != INVALID_TRANSCODER)
> > +				trans |= BIT(new_crtc_state->master_transcoder);
> >  
> >  			if (intel_cpu_transcoders_need_modeset(state, trans)) {
> >  				new_crtc_state->uapi.mode_changed = true;
> > -- 
> > 2.19.1
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-01-23 22:03 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-23  0:24 [Intel-gfx] [PATCH 1/2] drm/i915/dp: Do not set master_trans bit in bitmak if INVALID_TRANSCODER Manasi Navare
2020-01-23  0:24 ` [Intel-gfx] [PATCH 2/2] drm/i915/dp: Modeset only the tiled connectors with CRTC Manasi Navare
2020-01-23 18:27   ` Ville Syrjälä
2020-01-23 22:47     ` Manasi Navare
2020-01-24 21:22       ` Manasi Navare
2020-01-23  4:40 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/2] drm/i915/dp: Do not set master_trans bit in bitmak if INVALID_TRANSCODER Patchwork
2020-01-23  5:19 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2020-01-23 14:01 ` [Intel-gfx] [PATCH 1/2] " Ville Syrjälä
2020-01-23 22:04   ` Manasi Navare [this message]
2020-01-23 18:25 ` Souza, Jose
2020-01-23 18:31   ` Ville Syrjälä
2020-01-23 18:39     ` Ville Syrjälä
2020-01-23 22:00     ` Manasi Navare
2020-01-24  1:13 ` Manasi Navare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200123220426.GB4379@intel.com \
    --to=manasi.d.navare@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox