From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2] drm/i915: Fix the i915_dsc_fec_support debugfs file for DP MST connectors
Date: Mon, 8 Jun 2020 21:26:50 +0300 [thread overview]
Message-ID: <20200608182650.13642-1-imre.deak@intel.com> (raw)
In-Reply-To: <20200608181023.11503-1-imre.deak@intel.com>
DSC is not supported on DP MST streams so just return -EINVAL when
reading/writing the i915_dsc_fec_support debugfs file for such
connectors.
This also fixes an OOPS, caused by the encoder->digport cast, which is
not valid for MST encoders.
v2:
- Check encoder, which is unset for an MST connector, before it gets
enabled.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
.../drm/i915/display/intel_display_debugfs.c | 36 +++++++++++++++----
1 file changed, 29 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
index 2b640d8ab9d2..9db6f7e0ccaa 100644
--- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
+++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
@@ -2094,6 +2094,8 @@ static int i915_dsc_fec_support_show(struct seq_file *m, void *data)
drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
do {
+ struct intel_encoder *encoder;
+
try_again = false;
ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
&ctx);
@@ -2120,8 +2122,17 @@ static int i915_dsc_fec_support_show(struct seq_file *m, void *data)
} else if (ret) {
break;
}
- intel_dp = intel_attached_dp(to_intel_connector(connector));
+
+ encoder = intel_attached_encoder(to_intel_connector(connector));
+ /* TODO: Add DSC support for MST streams */
+ if (encoder->type == INTEL_OUTPUT_DP_MST) {
+ ret = -EINVAL;
+ break;
+ }
+
+ intel_dp = &enc_to_dig_port(encoder)->dp;
crtc_state = to_intel_crtc_state(crtc->state);
+
seq_printf(m, "DSC_Enabled: %s\n",
yesno(crtc_state->dsc.compression_enable));
seq_printf(m, "DSC_Sink_Support: %s\n",
@@ -2147,9 +2158,8 @@ static ssize_t i915_dsc_fec_support_write(struct file *file,
int ret;
struct drm_connector *connector =
((struct seq_file *)file->private_data)->private;
- struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
- struct drm_i915_private *i915 = to_i915(encoder->base.dev);
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct drm_i915_private *i915 = to_i915(connector->dev);
+ struct intel_encoder *encoder;
if (len == 0)
return 0;
@@ -2163,10 +2173,22 @@ static ssize_t i915_dsc_fec_support_write(struct file *file,
drm_dbg(&i915->drm, "Got %s for DSC Enable\n",
(dsc_enable) ? "true" : "false");
- intel_dp->force_dsc_en = dsc_enable;
- *offp += len;
- return len;
+ drm_modeset_lock(&i915->drm.mode_config.connection_mutex, NULL);
+
+ encoder = intel_attached_encoder(to_intel_connector(connector));
+ /* TODO: Add DSC support for MST streams */
+ if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST) {
+ ret = -EINVAL;
+ } else {
+ enc_to_intel_dp(encoder)->force_dsc_en = dsc_enable;
+ *offp += len;
+ ret = len;
+ }
+
+ drm_modeset_unlock(&i915->drm.mode_config.connection_mutex);
+
+ return ret;
}
static int i915_dsc_fec_support_open(struct inode *inode,
--
2.23.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-06-08 18:26 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-08 18:10 [Intel-gfx] [PATCH] drm/i915: Fix the i915_dsc_fec_support debugfs file for DP MST connectors Imre Deak
2020-06-08 18:26 ` Imre Deak [this message]
2020-06-09 18:41 ` Imre Deak
2020-06-09 19:00 ` Manasi Navare
2020-06-08 18:58 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915: Fix the i915_dsc_fec_support debugfs file for DP MST connectors (rev2) Patchwork
2020-06-08 20:14 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-06-09 15:05 ` [Intel-gfx] [PATCH] drm/i915: Fix the i915_dsc_fec_support debugfs file for DP MST connectors Ville Syrjälä
2020-06-09 17:40 ` Imre Deak
2020-06-09 17:59 ` Ville Syrjälä
2020-06-09 18:08 ` Imre Deak
2020-06-09 18:56 ` Manasi Navare
2020-06-09 19:13 ` Imre Deak
2020-06-09 19:17 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915: Fix the i915_dsc_fec_support debugfs file for DP MST connectors (rev3) Patchwork
2020-06-09 20:58 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-06-11 10:41 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200608182650.13642-1-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox