Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Matthew Auld <matthew.auld@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Subject: [Intel-gfx] [RFC 23/60] drm/i915/dg1: map/unmap pll clocks
Date: Fri, 10 Jul 2020 12:57:20 +0100	[thread overview]
Message-ID: <20200710115757.290984-24-matthew.auld@intel.com> (raw)
In-Reply-To: <20200710115757.290984-1-matthew.auld@intel.com>

From: Lucas De Marchi <lucas.demarchi@intel.com>

DG1 uses 2 registers for the ddi clock mapping, with PHY A and B using
DPCLKA_CFGCR0 and PHY C and D using DPCLKA1_CFGCR0. Hide this behind a
single macro that chooses the correct register according to the phy
being accessed, use the correct bitfields for each pll/phy and implement
separate functions for DG1 since it doesn't share much with ICL/TGL
anymore.

The previous values were correct for PHY A and B since they were using
the same register as before and the bitfields were matching.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c     | 92 +++++++++++++++++++-
 drivers/gpu/drm/i915/display/intel_display.c | 25 +++++-
 drivers/gpu/drm/i915/i915_reg.h              | 15 ++++
 3 files changed, 128 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 4a1a896098f9..b5ba02deb24b 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -2848,6 +2848,38 @@ static u32 icl_dpclka_cfgcr0_clk_off(struct drm_i915_private *dev_priv,
 	return 0;
 }
 
+static void dg1_map_plls_to_ports(struct intel_encoder *encoder,
+				  const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	struct intel_shared_dpll *pll = crtc_state->shared_dpll;
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+	u32 val;
+
+	/*
+	 * If we fail this, something went very wrong: first 2 PLLs should be
+	 * used by first 2 phys and last 2 PLLs by last phys
+	 */
+	if (WARN_ON((pll->info->id < DPLL_ID_DG1_DPLL2 && phy >= PHY_C) ||
+		    (pll->info->id >= DPLL_ID_DG1_DPLL2 && phy < PHY_C)))
+		return;
+
+	mutex_lock(&dev_priv->dpll.lock);
+
+	val = intel_de_read(dev_priv, DG1_DPCLKA_CFGCR0(phy));
+	WARN_ON((val & DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)) == 0);
+
+	val &= ~DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy);
+	val |= DG1_DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, phy);
+	intel_de_write(dev_priv, DG1_DPCLKA_CFGCR0(phy), val);
+	intel_de_posting_read(dev_priv, DG1_DPCLKA_CFGCR0(phy));
+
+	val &= ~DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
+	intel_de_write(dev_priv, DG1_DPCLKA_CFGCR0(phy), val);
+
+	mutex_unlock(&dev_priv->dpll.lock);
+}
+
 static void icl_map_plls_to_ports(struct intel_encoder *encoder,
 				  const struct intel_crtc_state *crtc_state)
 {
@@ -2885,6 +2917,19 @@ static void icl_map_plls_to_ports(struct intel_encoder *encoder,
 	mutex_unlock(&dev_priv->dpll.lock);
 }
 
+static void dg1_unmap_plls_to_ports(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
+
+	mutex_lock(&dev_priv->dpll.lock);
+
+	intel_de_rmw(dev_priv, DG1_DPCLKA_CFGCR0(phy), 0,
+		     DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy));
+
+	mutex_unlock(&dev_priv->dpll.lock);
+}
+
 static void icl_unmap_plls_to_ports(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -2900,6 +2945,40 @@ static void icl_unmap_plls_to_ports(struct intel_encoder *encoder)
 	mutex_unlock(&dev_priv->dpll.lock);
 }
 
+static void dg1_sanitize_port_clk_off(struct drm_i915_private *dev_priv,
+				      u32 port_mask, bool ddi_clk_needed)
+{
+	enum port port;
+	u32 val;
+
+	for_each_port_masked(port, port_mask) {
+		enum phy phy = intel_port_to_phy(dev_priv, port);
+		bool ddi_clk_off;
+
+		val = intel_de_read(dev_priv, DG1_DPCLKA_CFGCR0(phy));
+		ddi_clk_off = val & DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
+
+		if (ddi_clk_needed == !ddi_clk_off)
+			continue;
+
+		/*
+		 * Punt on the case now where clock is gated, but it would
+		 * be needed by the port. Something else is really broken then.
+		 */
+		if (ddi_clk_needed) {
+			WARN(1, "ddi_clk_needed=%u ddi_clk_off=%u phy=%u\n",
+			     ddi_clk_needed, ddi_clk_off, phy);
+			continue;
+		}
+
+		DRM_NOTE("PHY %c is disabled/in DSI mode with an ungated DDI clock, gate it\n",
+			 phy_name(phy));
+
+		val |= DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
+		intel_de_write(dev_priv, DG1_DPCLKA_CFGCR0(phy), val);
+	}
+}
+
 static void icl_sanitize_port_clk_off(struct drm_i915_private *dev_priv,
 				      u32 port_mask, bool ddi_clk_needed)
 {
@@ -2982,7 +3061,10 @@ void icl_sanitize_encoder_pll_mapping(struct intel_encoder *encoder)
 		ddi_clk_needed = false;
 	}
 
-	icl_sanitize_port_clk_off(dev_priv, port_mask, ddi_clk_needed);
+	if (IS_DG1(dev_priv))
+		dg1_sanitize_port_clk_off(dev_priv, port_mask, ddi_clk_needed);
+	else
+		icl_sanitize_port_clk_off(dev_priv, port_mask, ddi_clk_needed);
 }
 
 static void intel_ddi_clk_select(struct intel_encoder *encoder,
@@ -3507,7 +3589,9 @@ static void intel_ddi_pre_enable(struct intel_atomic_state *state,
 
 	drm_WARN_ON(&dev_priv->drm, crtc_state->has_pch_encoder);
 
-	if (INTEL_GEN(dev_priv) >= 11)
+	if (IS_DG1(dev_priv))
+		dg1_map_plls_to_ports(encoder, crtc_state);
+	else if (INTEL_GEN(dev_priv) >= 11)
 		icl_map_plls_to_ports(encoder, crtc_state);
 
 	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
@@ -3693,7 +3777,9 @@ static void intel_ddi_post_disable(struct intel_atomic_state *state,
 		intel_ddi_post_disable_dp(state, encoder, old_crtc_state,
 					  old_conn_state);
 
-	if (INTEL_GEN(dev_priv) >= 11)
+	if (IS_DG1(dev_priv))
+		dg1_unmap_plls_to_ports(encoder);
+	else if (INTEL_GEN(dev_priv) >= 11)
 		icl_unmap_plls_to_ports(encoder);
 
 	if (intel_crtc_has_dp_encoder(old_crtc_state) || is_tc_port)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 8b30daf7e304..8dc83b480466 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -10781,6 +10781,27 @@ static int hsw_crtc_compute_clock(struct intel_crtc *crtc,
 	return 0;
 }
 
+static void dg1_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
+			    struct intel_crtc_state *pipe_config)
+{
+	enum icl_port_dpll_id port_dpll_id = ICL_PORT_DPLL_DEFAULT;
+	enum phy phy = intel_port_to_phy(dev_priv, port);
+	enum intel_dpll_id id;
+	u32 val;
+
+	val = intel_de_read(dev_priv, DG1_DPCLKA_CFGCR0(phy))
+		& DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy);
+	id = DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_VAL_TO_ID(val, phy);
+
+	if (WARN_ON(id > DPLL_ID_DG1_DPLL3))
+		return;
+
+	pipe_config->icl_port_dplls[port_dpll_id].pll =
+		intel_get_shared_dpll_by_id(dev_priv, id);
+
+	icl_set_active_port_dpll(pipe_config, port_dpll_id);
+}
+
 static void cnl_get_ddi_pll(struct drm_i915_private *dev_priv, enum port port,
 			    struct intel_crtc_state *pipe_config)
 {
@@ -11080,7 +11101,9 @@ static void hsw_get_ddi_port_state(struct intel_crtc *crtc,
 			port = TRANS_DDI_FUNC_CTL_VAL_TO_PORT(tmp);
 	}
 
-	if (INTEL_GEN(dev_priv) >= 11)
+	if (IS_DG1(dev_priv))
+		dg1_get_ddi_pll(dev_priv, port, pipe_config);
+	else if (INTEL_GEN(dev_priv) >= 11)
 		icl_get_ddi_pll(dev_priv, port, pipe_config);
 	else if (IS_CANNONLAKE(dev_priv))
 		cnl_get_ddi_pll(dev_priv, port, pipe_config);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 1ae8d8542b66..7b963f362190 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -230,12 +230,14 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define _TRANS(tran, a, b)		_PICK_EVEN(tran, a, b)
 #define _PORT(port, a, b)		_PICK_EVEN(port, a, b)
 #define _PLL(pll, a, b)			_PICK_EVEN(pll, a, b)
+#define _PHY(phy, a, b)			_PICK_EVEN(phy, a, b)
 
 #define _MMIO_PIPE(pipe, a, b)		_MMIO(_PIPE(pipe, a, b))
 #define _MMIO_PLANE(plane, a, b)	_MMIO(_PLANE(plane, a, b))
 #define _MMIO_TRANS(tran, a, b)		_MMIO(_TRANS(tran, a, b))
 #define _MMIO_PORT(port, a, b)		_MMIO(_PORT(port, a, b))
 #define _MMIO_PLL(pll, a, b)		_MMIO(_PLL(pll, a, b))
+#define _MMIO_PHY(phy, a, b)		_MMIO(_PHY(phy, a, b))
 
 #define _PHY3(phy, ...)			_PICK(phy, __VA_ARGS__)
 
@@ -10291,6 +10293,7 @@ enum skl_power_gate {
 #define  DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port)	(3 << DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port))
 #define  DPCLKA_CFGCR0_DDI_CLK_SEL(pll, port)	((pll) << DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port))
 
+/* ICL Clocks */
 #define ICL_DPCLKA_CFGCR0			_MMIO(0x164280)
 #define  ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)	(1 << _PICK(phy, 10, 11, 24))
 #define  ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port)	(1 << ((tc_port) < PORT_TC4 ? \
@@ -10300,6 +10303,18 @@ enum skl_power_gate {
 #define  ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy)	(3 << ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy))
 #define  ICL_DPCLKA_CFGCR0_DDI_CLK_SEL(pll, phy)	((pll) << ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy))
 
+/* DG1 Clocks */
+#define _DG1_DPCLKA_CFGCR0			0x164280
+#define _DG1_DPCLKA1_CFGCR0			0x16C280
+#define DG1_DPCLKA_CFGCR0(phy)			_MMIO_PHY((phy) / 2, \
+							  _DG1_DPCLKA_CFGCR0, \
+							  _DG1_DPCLKA1_CFGCR0)
+#define   DG1_DPCLKA_CFGCR0_DDI_CLK_OFF(phy)             (1 << (10 + ((phy) % 2)))
+#define   DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy)        (0x3 << (((phy) % 2) * 2))
+#define   DG1_DPCLKA_CFGCR0_DDI_CLK_SEL(pll, phy)        (((pll) % 2) << (((phy) % 2)) * 2)
+#define   DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_VAL_TO_ID(val, phy) \
+	  ((((val) & DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy)) >> ((phy % 2) * 2)) + (2 * (phy / 2)))
+
 /* CNL PLL */
 #define DPLL0_ENABLE		0x46010
 #define DPLL1_ENABLE		0x46014
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-07-10 12:00 UTC|newest]

Thread overview: 87+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-10 11:56 [Intel-gfx] [RFC 00/60] DG1 LMEM enabling Matthew Auld
2020-07-10 11:56 ` [Intel-gfx] [RFC 01/60] drm/i915: Add has_master_unit_irq flag Matthew Auld
2020-07-10 11:56 ` [Intel-gfx] [RFC 02/60] drm/i915/dg1: add initial DG-1 definitions Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 03/60] drm/i915/dg1: Add DG1 PCI IDs Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 04/60] drm/i915/dg1: add support for the master unit interrupt Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 05/60] drm/i915/dg1: Remove SHPD_FILTER_CNT register programming Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 06/60] drm/i915/dg1: Add fake PCH Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 07/60] drm/i915/dg1: Initialize RAWCLK properly Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 08/60] drm/i915/dg1: Define MOCS table for DG1 Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 09/60] drm/i915/dg1: Add DG1 power wells Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 10/60] drm/i915/dg1: Increase mmio size to 4MB Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 11/60] drm/i915/dg1: Wait for pcode/uncore handshake at startup Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 12/60] drm/i915/dg1: Add DPLL macros for DG1 Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 13/60] drm/i915/dg1: Add and setup DPLLs " Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 14/60] drm/i915/dg1: Enable DPLL " Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 15/60] drm/i915/dg1: add hpd interrupt handling Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 16/60] drm/i915/dg1: invert HPD pins Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 17/60] drm/i915/dg1: gmbus pin mapping Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 18/60] drm/i915/dg1: Enable first 2 ports for DG1 Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 19/60] drm/i915/dg1: Don't program PHY_MISC for PHY-C and PHY-D Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 20/60] drm/i915/dg1: Update comp master/slave relationships for PHYs Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 21/60] drm/i915/dg1: Update voltage swing tables for DP Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 22/60] drm/i915/dg1: provide port/phy mapping for vbt Matthew Auld
2020-07-10 11:57 ` Matthew Auld [this message]
2020-07-10 11:57 ` [Intel-gfx] [RFC 24/60] drm/i915/dg1: enable PORT C/D aka D/E Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 25/60] drm/i915/dg1: Load DMC Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 26/60] drm/i915/rkl: Add initial workarounds Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 27/60] drm/i915/dg1: Add initial DG1 workarounds Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 28/60] drm/i915/dg1: DG1 does not support DC6 Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 29/60] drm/i915/lmem: Limit block size to 4G Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 30/60] drm/i915/lmem: Do not check r->sgt.pfn for NULL Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 31/60] drm/i915/dgfx: define llc and snooping behaviour Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 32/60] drm/i915/lmem: support pread Matthew Auld
2020-07-10 12:39   ` Tvrtko Ursulin
2020-07-10 13:04     ` Chris Wilson
2020-07-10 11:57 ` [Intel-gfx] [RFC 33/60] drm/i915/lmem: support pwrite Matthew Auld
2020-07-13  5:09   ` Dave Airlie
2020-07-14 14:35     ` Matthew Auld
2020-07-16  0:43       ` Dave Airlie
2020-07-16 10:11         ` Matthew Auld
2020-07-19 21:52           ` Dave Airlie
2020-08-07  9:32             ` Joonas Lahtinen
2020-08-07  9:46     ` Joonas Lahtinen
2020-08-09 21:06       ` Dave Airlie
2020-07-10 11:57 ` [Intel-gfx] [RFC 34/60] drm/i915: introduce kernel blitter_context Matthew Auld
2020-08-03 19:59   ` Lucas De Marchi
2020-08-03 20:17     ` Lucas De Marchi
2020-07-10 11:57 ` [Intel-gfx] [RFC 35/60] drm/i915/query: Expose memory regions through the query uAPI Matthew Auld
2020-07-10 16:20   ` Tvrtko Ursulin
2020-07-10 11:57 ` [Intel-gfx] [RFC 36/60] drm/i915/uapi: introduce drm_i915_gem_create_ext Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 37/60] drm/i915/lmem: allocate cmd ring in lmem Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 38/60] drm/i915/dg1: Introduce dmabuf mmap to LMEM Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 39/60] drm/i915: setup the LMEM region Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 40/60] drm/i915: drop fake LMEM Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 41/60] drm/i915: Distinction of memory regions Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 42/60] drm/i915: PPGTT support Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 43/60] drm/i915: support GGTT LMEM entries Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 44/60] drm/i915: allocate context from LMEM Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 45/60] drm/i915: move engine scratch to LMEM Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 46/60] drm/i915: Provide a way to disable PCIe relaxed write ordering Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 47/60] drm/i915: setup GPU device lmem region Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 48/60] drm/i915: Fix object page offset within a region Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 49/60] drm/i915: add i915_gem_object_is_devmem() function Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 50/60] drm/i915: finish memory region support for stolen objects Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 51/60] drm/i915/lmem: support optional CPU clearing for special internal use Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 52/60] drm/i915/guc: put all guc objects in lmem when available Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 53/60] drm/i915: Create stolen memory region from local memory Matthew Auld
2020-07-13  4:48   ` Dave Airlie
2020-07-14 15:01     ` Matthew Auld
2020-07-14 16:57       ` Tang, CQ
2020-07-14 19:26         ` Dave Airlie
2020-08-07  9:38           ` Joonas Lahtinen
2020-08-07 16:24             ` Tang, CQ
2020-07-14 17:39       ` Ville Syrjälä
2020-07-10 11:57 ` [Intel-gfx] [RFC 54/60] drm/i915/lmem: Bypass aperture when lmem is available Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 55/60] drm/i915/lmem: reset the lmem buffer created by fbdev Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 56/60] drm/i915/dsb: Enable lmem for dsb Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 57/60] drm/i915: Reintroduce mem->reserved Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 58/60] drm/i915/dg1: Reserve first 1MB of local memory Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 59/60] drm/i915: defer pd lmem block put to worker Matthew Auld
2020-07-10 11:57 ` [Intel-gfx] [RFC 60/60] drm/i915/lmem: allocate HWSP in lmem Matthew Auld
2020-07-10 12:51 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for DG1 LMEM enabling Patchwork
2020-07-10 12:52 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-07-10 13:12 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-07-10 14:50 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-08-11  3:23 ` [Intel-gfx] [RFC 00/60] " Dave Airlie
2020-08-11 10:48   ` Matthew Auld

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200710115757.290984-24-matthew.auld@intel.com \
    --to=matthew.auld@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lucas.demarchi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox