From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Subject: [Intel-gfx] [PATCH] i915/tgl: Fix TC-cold block/unblock sequence
Date: Wed, 5 Aug 2020 18:00:56 +0300 [thread overview]
Message-ID: <20200805150056.24248-1-imre.deak@intel.com> (raw)
The command register is the low PCODE MBOX low register not the high
one as described by the spec. This left the system with the TC-cold
power state being blocked all the time. Fix things by using the correct
register.
Also to make sure we retry a request for at least 600usec, when the
PCODE MBOX command itself succeeded, but the TC-cold block command
failed, sleep for 1msec unconditionally after any fail.
The change was tested with JTAG register read of the HW/FW's actual
TC-cold state, which reported the expected states after this change.
Tested-by: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_display_power.c | 10 +++++-----
drivers/gpu/drm/i915/i915_reg.h | 4 ++--
2 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 9f0241a53a45..8f0b712ed7a0 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -3927,12 +3927,13 @@ tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
int ret;
while (1) {
- u32 low_val = 0, high_val;
+ u32 low_val;
+ u32 high_val = 0;
if (block)
- high_val = TGL_PCODE_EXIT_TCCOLD_DATA_H_BLOCK_REQ;
+ low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ;
else
- high_val = TGL_PCODE_EXIT_TCCOLD_DATA_H_UNBLOCK_REQ;
+ low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ;
/*
* Spec states that we should timeout the request after 200us
@@ -3951,8 +3952,7 @@ tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
if (++tries == 3)
break;
- if (ret == -EAGAIN)
- msleep(1);
+ msleep(1);
}
if (ret)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2b403df03404..e85c6fc1f3cb 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9226,8 +9226,8 @@ enum {
#define DISPLAY_IPS_CONTROL 0x19
#define TGL_PCODE_TCCOLD 0x26
#define TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED REG_BIT(0)
-#define TGL_PCODE_EXIT_TCCOLD_DATA_H_BLOCK_REQ 0
-#define TGL_PCODE_EXIT_TCCOLD_DATA_H_UNBLOCK_REQ REG_BIT(0)
+#define TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ 0
+#define TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ REG_BIT(0)
/* See also IPS_CTL */
#define IPS_PCODE_CONTROL (1 << 30)
#define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A
--
2.23.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next reply other threads:[~2020-08-05 15:01 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-05 15:00 Imre Deak [this message]
2020-08-05 15:16 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for i915/tgl: Fix TC-cold block/unblock sequence Patchwork
2020-08-05 15:16 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-08-05 15:39 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-08-05 21:06 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-08-06 18:20 ` Imre Deak
2020-08-06 17:17 ` [Intel-gfx] [PATCH] " Souza, Jose
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200805150056.24248-1-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=nivedita.swaminathan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox