From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v2 06/11] drm/i915: Split ICL MG PHY buf trans per output type
Date: Wed, 30 Sep 2020 02:34:44 +0300 [thread overview]
Message-ID: <20200929233449.32323-7-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20200929233449.32323-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Make the mess inside the buf trans funcs a bit more manageable by
splitting along the lines of output type.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 31 ++++++++++++++++++------
1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 4c3416d89f30..e3c6d4942b68 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1079,19 +1079,34 @@ icl_get_combo_buf_trans(struct intel_encoder *encoder, int type, int rate,
}
static const struct icl_mg_phy_ddi_buf_trans *
-icl_get_mg_buf_trans(struct intel_encoder *encoder, int type, int rate,
- int *n_entries)
+icl_get_mg_buf_trans_hdmi(struct intel_encoder *encoder, int type, int rate,
+ int *n_entries)
{
- if (type == INTEL_OUTPUT_HDMI) {
- *n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_hdmi);
- return icl_mg_phy_ddi_translations_hdmi;
- } else if (rate > 270000) {
+ *n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_hdmi);
+ return icl_mg_phy_ddi_translations_hdmi;
+}
+
+static const struct icl_mg_phy_ddi_buf_trans *
+icl_get_mg_buf_trans_dp(struct intel_encoder *encoder, int type, int rate,
+ int *n_entries)
+{
+ if (rate > 270000) {
*n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_hbr2_hbr3);
return icl_mg_phy_ddi_translations_hbr2_hbr3;
+ } else {
+ *n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_rbr_hbr);
+ return icl_mg_phy_ddi_translations_rbr_hbr;
}
+}
- *n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations_rbr_hbr);
- return icl_mg_phy_ddi_translations_rbr_hbr;
+static const struct icl_mg_phy_ddi_buf_trans *
+icl_get_mg_buf_trans(struct intel_encoder *encoder, int type, int rate,
+ int *n_entries)
+{
+ if (type == INTEL_OUTPUT_HDMI)
+ return icl_get_mg_buf_trans_hdmi(encoder, type, rate, n_entries);
+ else
+ return icl_get_mg_buf_trans_dp(encoder, type, rate, n_entries);
}
static const struct cnl_ddi_buf_trans *
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-09-29 23:35 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-29 23:34 [Intel-gfx] [PATCH v2 00/11] drm/i915: Plumb crtc state to link training code Ville Syrjala
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 01/11] drm/i915: s/pre_empemph/preemph/ Ville Syrjala
2020-09-30 13:56 ` Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 02/11] drm/i915: s/old_crtc_state/crtc_state/ Ville Syrjala
2020-09-30 13:57 ` Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 03/11] drm/i915: Make intel_dp_process_phy_request() static Ville Syrjala
2020-09-30 13:58 ` Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 04/11] drm/i915: Shove the PHY test into the hotplug work Ville Syrjala
2020-09-30 8:10 ` kernel test robot
2020-09-30 10:04 ` [Intel-gfx] [PATCH v3 " Ville Syrjala
2020-09-30 15:12 ` Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 05/11] drm/i915: Split ICL combo PHY buf trans per output type Ville Syrjala
2020-09-30 15:19 ` Imre Deak
2020-09-29 23:34 ` Ville Syrjala [this message]
2020-09-30 15:21 ` [Intel-gfx] [PATCH v2 06/11] drm/i915: Split ICL MG " Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 07/11] drm/i915: Split EHL combo " Ville Syrjala
2020-09-30 15:24 ` Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 08/11] drm/i915: Split TGL " Ville Syrjala
2020-09-30 15:29 ` Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 09/11] drm/i915: Split TGL DKL " Ville Syrjala
2020-09-30 15:31 ` Imre Deak
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 10/11] drm/i915: Plumb crtc_state to link training Ville Syrjala
2020-09-30 16:36 ` Imre Deak
2020-09-30 18:50 ` Ville Syrjälä
2020-10-01 11:10 ` [Intel-gfx] [PATCH v4 " Ville Syrjala
2020-09-29 23:34 ` [Intel-gfx] [PATCH v2 11/11] drm/i915: Eliminate intel_dp.regs.dp_tp_{ctl, status} Ville Syrjala
2020-09-30 17:04 ` Imre Deak
2020-09-29 23:50 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Plumb crtc state to link training code (rev3) Patchwork
2020-09-29 23:51 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-09-30 0:07 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-09-30 10:28 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Plumb crtc state to link training code (rev4) Patchwork
2020-09-30 13:12 ` [Intel-gfx] ✓ Fi.CI.IGT: success for drm/i915: Plumb crtc state to link training code (rev3) Patchwork
2020-09-30 15:35 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for drm/i915: Plumb crtc state to link training code (rev4) Patchwork
2020-10-01 11:27 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Plumb crtc state to link training code (rev5) Patchwork
2020-10-01 11:56 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-01 13:12 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-10-01 14:02 ` [Intel-gfx] [PATCH v2 00/11] drm/i915: Plumb crtc state to link training code Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200929233449.32323-7-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox