Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 2/2] drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/
Date: Fri, 16 Oct 2020 22:48:00 +0300	[thread overview]
Message-ID: <20201016194800.25581-2-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20201016194800.25581-1-ville.syrjala@linux.intel.com>

From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Rename intel_dp_sink_dpms() to intel_dp_set_power()
so one doesn't always have to convert from the DPMS
enum values to the actual DP D-states.

Also when dealing with a branch device this has nothing to
do with any sink, so the old name was nonsense anyway.
Also adjust the debug message accordingly, and pimp it
with the standard encoder id+name thing.

Trivial bits done with cocci:
@@
expression DP;
@@
(
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_OFF)
+ intel_dp_set_power(DP, DP_SET_POWER_D3)
|
- intel_dp_sink_dpms(DP, DRM_MODE_DPMS_ON)
+ intel_dp_set_power(DP, DP_SET_POWER_D0)
)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c    |  6 +++---
 drivers/gpu/drm/i915/display/intel_dp.c     | 24 ++++++++++-----------
 drivers/gpu/drm/i915/display/intel_dp.h     |  2 +-
 drivers/gpu/drm/i915/display/intel_dp_mst.c |  2 +-
 4 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index bb0b9930958f..09811be08cfe 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3482,7 +3482,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state,
 	intel_ddi_init_dp_buf_reg(encoder, crtc_state);
 
 	if (!is_mst)
-		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+		intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
 
 	intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true);
 	/*
@@ -3564,7 +3564,7 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
 
 	intel_ddi_init_dp_buf_reg(encoder, crtc_state);
 	if (!is_mst)
-		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+		intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
 	intel_dp_configure_protocol_converter(intel_dp);
 	intel_dp_sink_set_decompression_state(intel_dp, crtc_state,
 					      true);
@@ -3738,7 +3738,7 @@ static void intel_ddi_post_disable_dp(struct intel_atomic_state *state,
 	 * Power down sink before disabling the port, otherwise we end
 	 * up getting interrupts from the sink on detecting link loss.
 	 */
-	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+	intel_dp_set_power(intel_dp, DP_SET_POWER_D3);
 
 	if (INTEL_GEN(dev_priv) >= 12) {
 		if (is_mst) {
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 4784aaeb934e..818daab252f3 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -3471,22 +3471,22 @@ void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
 			    enable ? "enable" : "disable");
 }
 
-/* If the sink supports it, try to set the power state appropriately */
-void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
+/* If the device supports it, try to set the power state appropriately */
+void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode)
 {
-	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
+	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
+	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 	int ret, i;
 
 	/* Should have a valid DPCD by this point */
 	if (intel_dp->dpcd[DP_DPCD_REV] < 0x11)
 		return;
 
-	if (mode != DRM_MODE_DPMS_ON) {
+	if (mode != DP_SET_POWER_D0) {
 		if (downstream_hpd_needs_d0(intel_dp))
 			return;
 
-		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
-					 DP_SET_POWER_D3);
+		ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode);
 	} else {
 		struct intel_lspcon *lspcon = dp_to_lspcon(intel_dp);
 
@@ -3497,8 +3497,7 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 		 * time to wake up.
 		 */
 		for (i = 0; i < 3; i++) {
-			ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
-						 DP_SET_POWER_D0);
+			ret = drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, mode);
 			if (ret == 1)
 				break;
 			msleep(1);
@@ -3509,8 +3508,9 @@ void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode)
 	}
 
 	if (ret != 1)
-		drm_dbg_kms(&i915->drm, "failed to %s sink power state\n",
-			    mode == DRM_MODE_DPMS_ON ? "enable" : "disable");
+		drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] Set power to %s failed\n",
+			    encoder->base.base.id, encoder->base.name,
+			    mode == DP_SET_POWER_D0 ? "D0" : "D3");
 }
 
 static bool cpt_dp_port_selected(struct drm_i915_private *dev_priv,
@@ -3744,7 +3744,7 @@ static void intel_disable_dp(struct intel_atomic_state *state,
 	 * ensure that we have vdd while we switch off the panel. */
 	intel_edp_panel_vdd_on(intel_dp);
 	intel_edp_backlight_off(old_conn_state);
-	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+	intel_dp_set_power(intel_dp, DP_SET_POWER_D3);
 	intel_edp_panel_off(intel_dp);
 }
 
@@ -3969,7 +3969,7 @@ static void intel_enable_dp(struct intel_atomic_state *state,
 				    lane_mask);
 	}
 
-	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
 	intel_dp_configure_protocol_converter(intel_dp);
 	intel_dp_start_link_train(intel_dp, pipe_config);
 	intel_dp_stop_link_train(intel_dp, pipe_config);
diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
index fcc28eb242f2..3f862b4fd34f 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -50,7 +50,7 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
 					    int link_rate, u8 lane_count);
 int intel_dp_retrain_link(struct intel_encoder *encoder,
 			  struct drm_modeset_acquire_ctx *ctx);
-void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
+void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode);
 void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp);
 void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp,
 					   const struct intel_crtc_state *crtc_state,
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index e948aacbd4ab..c8fcec4d0788 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -492,7 +492,7 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
 		    intel_dp->active_mst_links);
 
 	if (first_mst_stream)
-		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+		intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
 
 	drm_dp_send_power_updown_phy(&intel_dp->mst_mgr, connector->port, true);
 
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-10-16 19:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 19:47 [Intel-gfx] [PATCH 1/2] drm/i915: Move the lspcon resume from .reset() to intel_dp_sink_dpms() Ville Syrjala
2020-10-16 19:48 ` Ville Syrjala [this message]
2020-10-19 15:31   ` [Intel-gfx] [PATCH 2/2] drm/i915: s/intel_dp_sink_dpms/intel_dp_set_power/ Imre Deak
2020-10-16 20:24 ` [Intel-gfx] ✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Move the lspcon resume from .reset() to intel_dp_sink_dpms() Patchwork
2020-10-17  0:14 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2020-10-19 15:27 ` [Intel-gfx] [PATCH 1/2] " Imre Deak
2020-10-19 15:34   ` Ville Syrjälä
2020-10-19 15:51     ` Imre Deak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201016194800.25581-2-ville.syrjala@linux.intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox