Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Manasi Navare <manasi.d.navare@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v10 04/11] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3.
Date: Tue, 20 Oct 2020 21:39:53 +0300	[thread overview]
Message-ID: <20201020183953.GB6112@intel.com> (raw)
In-Reply-To: <20201008214535.22942-4-manasi.d.navare@intel.com>

On Thu, Oct 08, 2020 at 02:45:28PM -0700, Manasi Navare wrote:
> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> 
> Small changes to intel_dp_mode_valid(), allow listing modes that
> can only be supported in the bigjoiner configuration, which is
> not supported yet.
> 
> eDP does not support bigjoiner, so do not expose bigjoiner only
> modes on the eDP port.
> 
> v7:
> * Add can_bigjoiner() helper (Ville)
> * Pass bigjoiner to plane_size validation (Ville)
> v6:
> * Rebase after dp_downstream mode valid changes (Manasi)
> v5:
> * Increase max plane width to support 8K with bigjoiner (Maarten)
> v4:
> * Rebase (Manasi)
> 
> Changes since v1:
> - Disallow bigjoiner on eDP.
> Changes since v2:
> - Rename intel_dp_downstream_max_dotclock to intel_dp_max_dotclock,
>   and split off the downstream and source checking to its own function.
>   (Ville)
> v3:
> * Rebase (Manasi)
> 
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c |   5 +-
>  drivers/gpu/drm/i915/display/intel_display.h |   3 +-
>  drivers/gpu/drm/i915/display/intel_dp.c      | 126 +++++++++++++++----
>  drivers/gpu/drm/i915/display/intel_dp_mst.c  |   2 +-
>  drivers/gpu/drm/i915/display/intel_dsi.c     |   2 +-
>  drivers/gpu/drm/i915/display/intel_hdmi.c    |   2 +-
>  6 files changed, 111 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 723766b1eae3..cc540c7b7dcd 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -17642,7 +17642,8 @@ intel_mode_valid(struct drm_device *dev,
>  
>  enum drm_mode_status
>  intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> -				const struct drm_display_mode *mode)
> +				const struct drm_display_mode *mode,
> +				bool bigjoiner)
>  {
>  	int plane_width_max, plane_height_max;
>  
> @@ -17659,7 +17660,7 @@ intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
>  	 * too big for that.
>  	 */
>  	if (INTEL_GEN(dev_priv) >= 11) {
> -		plane_width_max = 5120;
> +		plane_width_max = 5120 << bigjoiner;
>  		plane_height_max = 4320;
>  	} else {
>  		plane_width_max = 5120;
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index d10b7c8cde3f..3d860a9da8fe 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -496,7 +496,8 @@ u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
>  bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
>  enum drm_mode_status
>  intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> -				const struct drm_display_mode *mode);
> +				const struct drm_display_mode *mode,
> +				bool bigjoiner);
>  enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
>  bool is_trans_port_sync_mode(const struct intel_crtc_state *state);
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 8a522edd7386..af2ff425e5d5 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -247,6 +247,29 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
>  	return max_link_clock * max_lanes;
>  }
>  
> +static int source_max_dotclock(struct intel_dp *intel_dp, bool allow_bigjoiner)
> +{
> +	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> +	struct intel_encoder *encoder = &intel_dig_port->base;
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +
> +	if (allow_bigjoiner && INTEL_GEN(dev_priv) >= 11 && !intel_dp_is_edp(intel_dp))

Wasn't this supposed to be s/edp/port==A/ ?

> +		return 2 * dev_priv->max_dotclk_freq;
> +
> +	return dev_priv->max_dotclk_freq;
> +}
-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-10-20 18:39 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-08 21:45 [Intel-gfx] [PATCH v10 01/11] HAX to make DSC work on the icelake test system Manasi Navare
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 02/11] drm/i915/display: Rename pipe_timings to transcoder_timings Manasi Navare
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 03/11] drm/i915: Add hw.pipe_mode to allow bigjoiner pipe/transcoder split Manasi Navare
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 04/11] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v3 Manasi Navare
2020-10-14 11:26   ` Ville Syrjälä
2020-10-14 19:04     ` Navare, Manasi
2020-10-15 11:52       ` Ville Syrjälä
2020-10-15 16:26         ` Navare, Manasi
2020-10-19 16:30           ` Ville Syrjälä
2020-10-19 22:51             ` Navare, Manasi
2020-10-20 18:39   ` Ville Syrjälä [this message]
2020-10-20 18:53     ` Navare, Manasi
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 05/11] drm/i915: Try to make bigjoiner work in atomic check Manasi Navare
2020-10-14 11:33   ` Ville Syrjälä
2020-10-14 19:09     ` Navare, Manasi
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 06/11] drm/i915: Enable big joiner support in enable and disable sequences Manasi Navare
2020-10-14 11:07   ` Jani Nikula
2020-10-15 13:07   ` Ville Syrjälä
2020-10-15 16:37     ` Navare, Manasi
2020-10-16 16:06       ` Ville Syrjälä
2020-10-16 18:17         ` Navare, Manasi
2020-10-16 18:50           ` Ville Syrjälä
2020-10-16 19:24             ` Navare, Manasi
2020-10-19 11:34               ` Jani Nikula
2020-10-19 22:53                 ` Navare, Manasi
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 07/11] drm/i915: Make hardware readout work on i915 Manasi Navare
2020-10-19 16:36   ` Ville Syrjälä
2020-10-19 22:45     ` Navare, Manasi
2020-10-20 18:45       ` Ville Syrjälä
2020-10-20 18:57         ` Navare, Manasi
2020-10-20 21:57           ` Navare, Manasi
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 08/11] drm/i915: Link planes in a bigjoiner configuration, v3 Manasi Navare
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 09/11] drm/i915: Add bigjoiner aware plane clipping checks Manasi Navare
2020-10-19 16:20   ` Ville Syrjälä
2020-10-19 22:56     ` Navare, Manasi
2020-10-20 18:51       ` Ville Syrjälä
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 10/11] drm/i915: Ensure correct master/slave enable/disable sequence Manasi Navare
2020-10-19 16:26   ` Ville Syrjälä
2020-10-19 23:05     ` Navare, Manasi
2020-10-08 21:45 ` [Intel-gfx] [PATCH v10 11/11] drm/i915: Add debugfs dumping for bigjoiner, v3 Manasi Navare
2020-10-08 22:15 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v10,01/11] HAX to make DSC work on the icelake test system Patchwork
2020-10-08 22:17 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-10-08 22:33 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-09  1:32 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-10-13 19:19 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [v10,01/11] HAX to make DSC work on the icelake test system (rev2) Patchwork
2020-10-13 19:21 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-10-13 19:45 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-14 14:32 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201020183953.GB6112@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=manasi.d.navare@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox