From: Sam Ravnborg <sam@ravnborg.org>
To: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel.vetter@intel.com>,
Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
DRI Development <dri-devel@lists.freedesktop.org>
Subject: Re: [Intel-gfx] [PATCH 4/5] drm: Allow const struct drm_driver
Date: Sun, 25 Oct 2020 22:44:50 +0100 [thread overview]
Message-ID: <20201025214450.GA13779@ravnborg.org> (raw)
In-Reply-To: <20201023122811.2374118-4-daniel.vetter@ffwll.ch>
On Fri, Oct 23, 2020 at 02:28:10PM +0200, Daniel Vetter wrote:
> It's nice if a big function/ioctl table like this is const. Only
> downside here is that we need a few more #ifdef to paper over the
> differences when CONFIG_DRM_LEGACY is enabled. Maybe provides more
> motivation to sunset that horror show :-)
>
> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> ---
> drivers/gpu/drm/drm_drv.c | 15 ++++++++++-----
> include/drm/drm_device.h | 4 ++++
> include/drm/drm_drv.h | 5 +++--
> 3 files changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> index 457ac0f82be2..94d2c41115b8 100644
> --- a/drivers/gpu/drm/drm_drv.c
> +++ b/drivers/gpu/drm/drm_drv.c
> @@ -574,7 +574,7 @@ static void drm_dev_init_release(struct drm_device *dev, void *res)
> }
>
> static int drm_dev_init(struct drm_device *dev,
> - struct drm_driver *driver,
> + const struct drm_driver *driver,
> struct device *parent)
> {
> int ret;
> @@ -589,7 +589,11 @@ static int drm_dev_init(struct drm_device *dev,
>
> kref_init(&dev->ref);
> dev->dev = get_device(parent);
> +#ifdef CONFIG_DRM_LEGACY
> + dev->driver = (struct drm_driver *) driver;
checkpatch will tell you to drop space after closing ')'
With this super important fix the patch is:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> +#else
> dev->driver = driver;
> +#endif
>
> INIT_LIST_HEAD(&dev->managed.resources);
> spin_lock_init(&dev->managed.lock);
> @@ -663,7 +667,7 @@ static void devm_drm_dev_init_release(void *data)
>
> static int devm_drm_dev_init(struct device *parent,
> struct drm_device *dev,
> - struct drm_driver *driver)
> + const struct drm_driver *driver)
> {
> int ret;
>
> @@ -678,7 +682,8 @@ static int devm_drm_dev_init(struct device *parent,
> return ret;
> }
>
> -void *__devm_drm_dev_alloc(struct device *parent, struct drm_driver *driver,
> +void *__devm_drm_dev_alloc(struct device *parent,
> + const struct drm_driver *driver,
> size_t size, size_t offset)
> {
> void *container;
> @@ -713,7 +718,7 @@ EXPORT_SYMBOL(__devm_drm_dev_alloc);
> * RETURNS:
> * Pointer to new DRM device, or ERR_PTR on failure.
> */
> -struct drm_device *drm_dev_alloc(struct drm_driver *driver,
> +struct drm_device *drm_dev_alloc(const struct drm_driver *driver,
> struct device *parent)
> {
> struct drm_device *dev;
> @@ -858,7 +863,7 @@ static void remove_compat_control_link(struct drm_device *dev)
> */
> int drm_dev_register(struct drm_device *dev, unsigned long flags)
> {
> - struct drm_driver *driver = dev->driver;
> + const struct drm_driver *driver = dev->driver;
> int ret;
>
> if (!driver->load)
> diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h
> index f4f68e7a9149..2c361964aee7 100644
> --- a/include/drm/drm_device.h
> +++ b/include/drm/drm_device.h
> @@ -83,7 +83,11 @@ struct drm_device {
> } managed;
>
> /** @driver: DRM driver managing the device */
> +#ifdef CONFIG_DRM_LEGACY
> struct drm_driver *driver;
> +#else
> + const struct drm_driver *driver;
> +#endif
>
> /**
> * @dev_private:
> diff --git a/include/drm/drm_drv.h b/include/drm/drm_drv.h
> index 7af220226a25..cc9da43b6eda 100644
> --- a/include/drm/drm_drv.h
> +++ b/include/drm/drm_drv.h
> @@ -516,7 +516,8 @@ struct drm_driver {
> #endif
> };
>
> -void *__devm_drm_dev_alloc(struct device *parent, struct drm_driver *driver,
> +void *__devm_drm_dev_alloc(struct device *parent,
> + const struct drm_driver *driver,
> size_t size, size_t offset);
>
> /**
> @@ -549,7 +550,7 @@ void *__devm_drm_dev_alloc(struct device *parent, struct drm_driver *driver,
> ((type *) __devm_drm_dev_alloc(parent, driver, sizeof(type), \
> offsetof(type, member)))
>
> -struct drm_device *drm_dev_alloc(struct drm_driver *driver,
> +struct drm_device *drm_dev_alloc(const struct drm_driver *driver,
> struct device *parent);
> int drm_dev_register(struct drm_device *dev, unsigned long flags);
> void drm_dev_unregister(struct drm_device *dev);
> --
> 2.28.0
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-10-25 21:44 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-23 12:28 [Intel-gfx] [PATCH 1/5] drm/radeon: Stop changing the drm_driver struct Daniel Vetter
2020-10-23 12:28 ` [Intel-gfx] [PATCH 2/5] drm: Compile out legacy chunks from struct drm_device Daniel Vetter
2020-10-23 15:10 ` Maxime Ripard
2020-10-25 22:08 ` Sam Ravnborg
2020-10-26 8:37 ` Thomas Zimmermann
2020-10-26 9:17 ` Daniel Vetter
2020-10-23 12:28 ` [Intel-gfx] [PATCH 3/5] drm/amdgpu: Paper over the drm_driver mangling for virt Daniel Vetter
2020-10-23 12:28 ` [Intel-gfx] [PATCH 4/5] drm: Allow const struct drm_driver Daniel Vetter
2020-10-23 15:11 ` Maxime Ripard
2020-10-25 21:44 ` Sam Ravnborg [this message]
2020-10-26 8:40 ` Thomas Zimmermann
2020-10-23 12:28 ` [Intel-gfx] [PATCH 5/5] drm/<drivers>: Constify " Daniel Vetter
2020-10-23 15:13 ` Maxime Ripard
2020-10-23 15:22 ` kernel test robot
2020-10-23 16:04 ` [Intel-gfx] [PATCH] " Daniel Vetter
2020-10-25 22:23 ` Sam Ravnborg
2020-10-25 23:04 ` Daniel Vetter
2020-10-26 8:43 ` [Intel-gfx] [PATCH 5/5] " Thomas Zimmermann
2020-10-26 9:14 ` Daniel Vetter
2020-10-23 13:39 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/5] drm/radeon: Stop changing the drm_driver struct Patchwork
2020-10-23 13:42 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-10-23 14:05 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-23 16:32 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/5] drm/radeon: Stop changing the drm_driver struct (rev2) Patchwork
2020-10-23 16:34 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-10-23 16:57 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-10-23 17:11 ` [Intel-gfx] ✗ Fi.CI.IGT: failure for series starting with [1/5] drm/radeon: Stop changing the drm_driver struct Patchwork
2020-10-23 20:37 ` [Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [1/5] drm/radeon: Stop changing the drm_driver struct (rev2) Patchwork
-- strict thread matches above, loose matches on Subject: below --
2020-10-30 10:11 [Intel-gfx] [PATCH 1/5] drm/radeon: Stop changing the drm_driver struct Daniel Vetter
2020-10-30 10:11 ` [Intel-gfx] [PATCH 4/5] drm: Allow const struct drm_driver Daniel Vetter
2020-10-30 18:53 ` Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201025214450.GA13779@ravnborg.org \
--to=sam@ravnborg.org \
--cc=airlied@linux.ie \
--cc=daniel.vetter@ffwll.ch \
--cc=daniel.vetter@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox