From: Imre Deak <imre.deak@intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 1/4] drm/i915: Introduce intel_dpll_get_hw_state()
Date: Tue, 10 Nov 2020 13:34:22 +0200 [thread overview]
Message-ID: <20201110113422.GD425411@ideak-desk.fi.intel.com> (raw)
In-Reply-To: <20201110112545.GC425411@ideak-desk.fi.intel.com>
On Tue, Nov 10, 2020 at 01:25:45PM +0200, Imre Deak wrote:
> On Tue, Nov 10, 2020 at 01:12:36AM +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Add a wrapper for the pll .get_hw_state() vfunc. Makes life
> > a bit less miserable when you don't have to worry where the
> > function pointer is stored.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Reviewed-by: Imre Deak <imre.deak@intel.com>
>
> There's also assert_shared_dpll().
Ah nvm, it's also converted.
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 14 +++++++------
> > drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 20 ++++++++++++++++---
> > drivers/gpu/drm/i915/display/intel_dpll_mgr.h | 3 +++
> > 3 files changed, 28 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 2729c852c668..a7c4cd7a8a31 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -10927,6 +10927,7 @@ static bool ilk_get_pipe_config(struct intel_crtc *crtc,
> > if (intel_de_read(dev_priv, PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
> > struct intel_shared_dpll *pll;
> > enum intel_dpll_id pll_id;
> > + bool pll_active;
> >
> > pipe_config->has_pch_encoder = true;
> >
> > @@ -10954,8 +10955,9 @@ static bool ilk_get_pipe_config(struct intel_crtc *crtc,
> > intel_get_shared_dpll_by_id(dev_priv, pll_id);
> > pll = pipe_config->shared_dpll;
> >
> > - drm_WARN_ON(dev, !pll->info->funcs->get_hw_state(dev_priv, pll,
> > - &pipe_config->dpll_hw_state));
> > + pll_active = intel_dpll_get_hw_state(dev_priv, pll,
> > + &pipe_config->dpll_hw_state);
> > + drm_WARN_ON(dev, !pll_active);
> >
> > tmp = pipe_config->dpll_hw_state.dpll;
> > pipe_config->pixel_multiplier =
> > @@ -11346,9 +11348,9 @@ static void hsw_get_ddi_port_state(struct intel_crtc *crtc,
> >
> > pll = pipe_config->shared_dpll;
> > if (pll) {
> > - drm_WARN_ON(&dev_priv->drm,
> > - !pll->info->funcs->get_hw_state(dev_priv, pll,
> > - &pipe_config->dpll_hw_state));
> > + bool pll_active = intel_dpll_get_hw_state(dev_priv, pll,
> > + &pipe_config->dpll_hw_state);
> > + drm_WARN_ON(&dev_priv->drm, !pll_active);
> > }
> >
> > /*
> > @@ -14587,7 +14589,7 @@ verify_single_dpll_state(struct drm_i915_private *dev_priv,
> >
> > drm_dbg_kms(&dev_priv->drm, "%s\n", pll->info->name);
> >
> > - active = pll->info->funcs->get_hw_state(dev_priv, pll, &dpll_hw_state);
> > + active = intel_dpll_get_hw_state(dev_priv, pll, &dpll_hw_state);
> >
> > if (!(pll->info->flags & INTEL_DPLL_ALWAYS_ON)) {
> > I915_STATE_WARN(!pll->on && pll->active_mask,
> > diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> > index a95e6a2ac698..1604c20bac33 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> > @@ -141,7 +141,7 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
> > "asserting DPLL %s with no DPLL\n", onoff(state)))
> > return;
> >
> > - cur_state = pll->info->funcs->get_hw_state(dev_priv, pll, &hw_state);
> > + cur_state = intel_dpll_get_hw_state(dev_priv, pll, &hw_state);
> > I915_STATE_WARN(cur_state != state,
> > "%s assertion failure (expected %s, current %s)\n",
> > pll->info->name, onoff(state), onoff(cur_state));
> > @@ -4527,13 +4527,27 @@ int intel_dpll_get_freq(struct drm_i915_private *i915,
> > return pll->info->funcs->get_freq(i915, pll);
> > }
> >
> > +/**
> > + * intel_dpll_get_hw_state - readout the DPLL's hardware state
> > + * @i915: i915 device
> > + * @pll: DPLL for which to calculate the output frequency
> > + * @hw_state: DPLL's hardware state
> > + *
> > + * Read out @pll's hardware state into @hw_state.
> > + */
> > +bool intel_dpll_get_hw_state(struct drm_i915_private *i915,
> > + struct intel_shared_dpll *pll,
> > + struct intel_dpll_hw_state *hw_state)
> > +{
> > + return pll->info->funcs->get_hw_state(i915, pll, hw_state);
> > +}
> > +
> > static void readout_dpll_hw_state(struct drm_i915_private *i915,
> > struct intel_shared_dpll *pll)
> > {
> > struct intel_crtc *crtc;
> >
> > - pll->on = pll->info->funcs->get_hw_state(i915, pll,
> > - &pll->state.hw_state);
> > + pll->on = intel_dpll_get_hw_state(i915, pll, &pll->state.hw_state);
> >
> > if (IS_JSL_EHL(i915) && pll->on &&
> > pll->info->id == DPLL_ID_EHL_DPLL4) {
> > diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.h b/drivers/gpu/drm/i915/display/intel_dpll_mgr.h
> > index 205542fb8dc7..4357f92eafd6 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.h
> > +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.h
> > @@ -400,6 +400,9 @@ void intel_update_active_dpll(struct intel_atomic_state *state,
> > struct intel_encoder *encoder);
> > int intel_dpll_get_freq(struct drm_i915_private *i915,
> > const struct intel_shared_dpll *pll);
> > +bool intel_dpll_get_hw_state(struct drm_i915_private *i915,
> > + struct intel_shared_dpll *pll,
> > + struct intel_dpll_hw_state *hw_state);
> > void intel_prepare_shared_dpll(const struct intel_crtc_state *crtc_state);
> > void intel_enable_shared_dpll(const struct intel_crtc_state *crtc_state);
> > void intel_disable_shared_dpll(const struct intel_crtc_state *crtc_state);
> > --
> > 2.26.2
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-11-10 11:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-09 23:12 [Intel-gfx] [PATCH 1/4] drm/i915: Introduce intel_dpll_get_hw_state() Ville Syrjala
2020-11-09 23:12 ` [Intel-gfx] [PATCH 2/4] drm/i915: Move intel_dpll_get_hw_state() into the hsw+ platform specific functions Ville Syrjala
2020-11-10 13:13 ` Imre Deak
2020-11-09 23:12 ` [Intel-gfx] [PATCH 3/4] drm/i915: Use actual readout results for .get_freq() Ville Syrjala
2020-11-10 13:38 ` Imre Deak
2020-11-09 23:12 ` [Intel-gfx] [PATCH 4/4] drm/i915: Relocate cnl_get_ddi_pll() Ville Syrjala
2020-11-10 13:42 ` Imre Deak
2020-11-10 11:25 ` [Intel-gfx] [PATCH 1/4] drm/i915: Introduce intel_dpll_get_hw_state() Imre Deak
2020-11-10 11:34 ` Imre Deak [this message]
2020-11-11 10:12 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for series starting with [1/4] " Patchwork
2020-11-11 10:41 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-11-11 12:27 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201110113422.GD425411@ideak-desk.fi.intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox