public inbox for intel-gfx@lists.freedesktop.org
 help / color / mirror / Atom feed
From: "Sripada, Radhakrishna" <radhakrishna.sripada@intel.com>
To: "José Roberto de Souza" <jose.souza@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 2/5] drm/i915/display: Replace intel_psr_enabled() calls by intel_crtc_state check
Date: Mon, 10 May 2021 16:47:56 -0700	[thread overview]
Message-ID: <20210510234756.GB31357@InViCtUs> (raw)
In-Reply-To: <20210418002126.87882-2-jose.souza@intel.com>

On Sat, Apr 17, 2021 at 05:21:23PM -0700, José Roberto de Souza wrote:
> All of this places don't need to intel_psr_enabled() that will lock
> psr mutex, check state and unlock.
> 
> Instead it can directly check PSR state in intel_crtc_state, the only
> place that was not possible was intel_read_dp_vsc_sdp() but since
> "drm/i915/display: Fill PSR state during hardware configuration read
> out" it is possible.
> 
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 5ee953aaa00c..72bcc10cae4f 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2861,7 +2861,6 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder,
>  			     const struct drm_connector_state *conn_state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> -	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>  	i915_reg_t reg = HSW_TVIDEO_DIP_CTL(crtc_state->cpu_transcoder);
>  	u32 dip_enable = VIDEO_DIP_ENABLE_AVI_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
>  			 VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW |
> @@ -2870,7 +2869,7 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder,
>  
>  	/* TODO: Add DSC case (DIP_ENABLE_PPS) */
>  	/* When PSR is enabled, this routine doesn't disable VSC DIP */
> -	if (intel_psr_enabled(intel_dp))
> +	if (crtc_state->has_psr)
>  		val &= ~dip_enable;
>  	else
>  		val &= ~(dip_enable | VIDEO_DIP_ENABLE_VSC_HSW);
> @@ -2885,7 +2884,7 @@ void intel_dp_set_infoframes(struct intel_encoder *encoder,
>  	intel_de_posting_read(dev_priv, reg);
>  
>  	/* When PSR is enabled, VSC SDP is handled by PSR routine */
> -	if (!intel_psr_enabled(intel_dp))
> +	if (!crtc_state->has_psr)
>  		intel_write_dp_sdp(encoder, crtc_state, DP_SDP_VSC);
>  
>  	intel_write_dp_sdp(encoder, crtc_state, HDMI_PACKET_TYPE_GAMUT_METADATA);
> @@ -3012,14 +3011,13 @@ static void intel_read_dp_vsc_sdp(struct intel_encoder *encoder,
>  				  struct drm_dp_vsc_sdp *vsc)
>  {
>  	struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> -	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>  	unsigned int type = DP_SDP_VSC;
>  	struct dp_sdp sdp = {};
>  	int ret;
>  
>  	/* When PSR is enabled, VSC SDP is handled by PSR routine */
> -	if (intel_psr_enabled(intel_dp))
> +	if (crtc_state->has_psr)
>  		return;
>  
>  	if ((crtc_state->infoframes.enable &
> -- 
> 2.31.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2021-05-10 23:48 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-18  0:21 [Intel-gfx] [PATCH 1/5] drm/i915/display: Fill PSR state during hardware configuration read out José Roberto de Souza
2021-04-18  0:21 ` [Intel-gfx] [PATCH 2/5] drm/i915/display: Replace intel_psr_enabled() calls by intel_crtc_state check José Roberto de Souza
2021-05-10 23:47   ` Sripada, Radhakrishna [this message]
2021-04-18  0:21 ` [Intel-gfx] [PATCH 3/5] drm/i915/display: Drop duplicated code in intel_dp_set_infoframes() José Roberto de Souza
2021-05-10 23:49   ` Sripada, Radhakrishna
2021-04-18  0:21 ` [Intel-gfx] [PATCH 4/5] drm/i915/display: Drop dead code from hsw_read_infoframe() José Roberto de Souza
2021-05-10 23:50   ` Sripada, Radhakrishna
2021-04-18  0:21 ` [Intel-gfx] [PATCH 5/5] drm/i915/display/xelpd: Implement Wa_14013475917 José Roberto de Souza
2021-05-11  0:05   ` Sripada, Radhakrishna
2021-04-18  0:41 ` [Intel-gfx] ✗ Fi.CI.DOCS: warning for series starting with [1/5] drm/i915/display: Fill PSR state during hardware configuration read out Patchwork
2021-04-18  1:07 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-04-18  3:00 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-05-11 19:32   ` Souza, Jose
2021-05-10 23:45 ` [Intel-gfx] [PATCH 1/5] " Sripada, Radhakrishna

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210510234756.GB31357@InViCtUs \
    --to=radhakrishna.sripada@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jose.souza@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox