From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: "Gwan-gyeong Mun" <gwan-gyeong.mun@intel.com>,
"José Roberto de Souza" <jose.souza@intel.com>
Subject: [Intel-gfx] [PATCH 4/7] drm/i915/display/psr: Handle plane restrictions at every page flip
Date: Thu, 23 Sep 2021 12:46:14 -0700 [thread overview]
Message-ID: <20210923194617.69136-4-jose.souza@intel.com> (raw)
In-Reply-To: <20210923194617.69136-1-jose.souza@intel.com>
PSR2 selective is not supported over rotated and scaled planes.
We had the rotation check in intel_psr2_sel_fetch_config_valid()
but that code path is only execute when a modeset is needed and
change those plane parameters do not require a modeset.
Also need to check those restricions in the second
for_each_oldnew_intel_plane_in_state() loop because the state could
only have a plane that is not affected by those restricitons but
the damaged area intersect with planes that has those restrictions,
so a full plane fetch is required.
BSpec: 55229
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
drivers/gpu/drm/i915/display/intel_psr.c | 45 ++++++++++++++----------
1 file changed, 26 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 1cc4130dec7b1..356e0e96abf4e 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -720,11 +720,7 @@ tgl_dc3co_exitline_compute_config(struct intel_dp *intel_dp,
static bool intel_psr2_sel_fetch_config_valid(struct intel_dp *intel_dp,
struct intel_crtc_state *crtc_state)
{
- struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- struct intel_plane_state *plane_state;
- struct intel_plane *plane;
- int i;
if (!dev_priv->params.enable_psr2_sel_fetch &&
intel_dp->psr.debug != I915_PSR_DEBUG_ENABLE_SEL_FETCH) {
@@ -739,14 +735,6 @@ static bool intel_psr2_sel_fetch_config_valid(struct intel_dp *intel_dp,
return false;
}
- for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
- if (plane_state->uapi.rotation != DRM_MODE_ROTATE_0) {
- drm_dbg_kms(&dev_priv->drm,
- "PSR2 sel fetch not enabled, plane rotated\n");
- return false;
- }
- }
-
/* Wa_14010254185 Wa_14010103792 */
if (IS_TGL_DISPLAY_STEP(dev_priv, STEP_A0, STEP_C0)) {
drm_dbg_kms(&dev_priv->drm,
@@ -1586,6 +1574,26 @@ static void cursor_area_workaround(const struct intel_plane_state *new_plane_sta
clip_area_update(pipe_clip, damaged_area);
}
+/*
+ * TODO: Not clear how to handle planes with negative position,
+ * also planes are not updated if they have a negative X
+ * position so for now doing a full update in this cases
+ *
+ * Plane scaling and rotation is not supported by selective fetch and both
+ * properties can change without a modeset, so need to be check at every
+ * atomic commmit.
+ */
+static bool psr2_sel_fetch_plane_state_supported(const struct intel_plane_state *plane_state)
+{
+ if (plane_state->uapi.dst.y1 < 0 ||
+ plane_state->uapi.dst.x1 < 0 ||
+ plane_state->scaler_id >= 0 ||
+ plane_state->uapi.rotation != DRM_MODE_ROTATE_0)
+ return false;
+
+ return true;
+}
+
int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
struct intel_crtc *crtc)
{
@@ -1618,13 +1626,7 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
!old_plane_state->uapi.visible)
continue;
- /*
- * TODO: Not clear how to handle planes with negative position,
- * also planes are not updated if they have a negative X
- * position so for now doing a full update in this cases
- */
- if (new_plane_state->uapi.dst.y1 < 0 ||
- new_plane_state->uapi.dst.x1 < 0) {
+ if (!psr2_sel_fetch_plane_state_supported(new_plane_state)) {
full_update = true;
break;
}
@@ -1703,6 +1705,11 @@ int intel_psr2_sel_fetch_update(struct intel_atomic_state *state,
if (!drm_rect_intersect(&inter, &new_plane_state->uapi.dst))
continue;
+ if (!psr2_sel_fetch_plane_state_supported(new_plane_state)) {
+ full_update = true;
+ break;
+ }
+
sel_fetch_area = &new_plane_state->psr2_sel_fetch_area;
sel_fetch_area->y1 = inter.y1 - new_plane_state->uapi.dst.y1;
sel_fetch_area->y2 = inter.y2 - new_plane_state->uapi.dst.y1;
--
2.33.0
next prev parent reply other threads:[~2021-09-23 19:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-23 19:46 [Intel-gfx] [PATCH 1/7] drm/i915/display: Wait PSR2 get out of deep sleep to update pipe José Roberto de Souza
2021-09-23 19:46 ` [Intel-gfx] [PATCH 2/7] drm/i915/display: Handle frontbuffer rendering when PSR2 selective fetch is enabled José Roberto de Souza
2021-09-29 12:40 ` Gwan-gyeong Mun
2021-09-23 19:46 ` [Intel-gfx] [PATCH 3/7] drm/i915/display: Add new fb_op_origin type and use it to optimize power savings José Roberto de Souza
2021-09-24 14:39 ` Ville Syrjälä
2021-09-24 17:11 ` Souza, Jose
2021-09-23 19:46 ` José Roberto de Souza [this message]
2021-09-29 17:50 ` [Intel-gfx] [PATCH 4/7] drm/i915/display/psr: Handle plane restrictions at every page flip Gwan-gyeong Mun
2021-09-29 18:20 ` Ville Syrjälä
2021-09-30 5:35 ` Gwan-gyeong Mun
2021-09-30 6:55 ` Ville Syrjälä
2021-09-23 19:46 ` [Intel-gfx] [PATCH 5/7] drm/i915/display/psr: Do full fetch when handling biplanar formats José Roberto de Souza
2021-09-24 14:41 ` Ville Syrjälä
2021-09-23 19:46 ` [Intel-gfx] [PATCH 6/7] drm/i915/display/adlp: Allow PSR2 to be enabled José Roberto de Souza
2021-09-29 13:29 ` Gwan-gyeong Mun
2021-09-23 19:46 ` [Intel-gfx] [PATCH 7/7] drm/i915/display: Enable PSR2 selective fetch by default José Roberto de Souza
2021-09-29 13:26 ` Gwan-gyeong Mun
2021-09-23 20:44 ` [Intel-gfx] ✗ Fi.CI.DOCS: warning for series starting with [1/7] drm/i915/display: Wait PSR2 get out of deep sleep to update pipe Patchwork
2021-09-23 21:08 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2021-09-24 1:44 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2021-09-24 14:35 ` [Intel-gfx] [PATCH 1/7] " Ville Syrjälä
2021-09-24 17:10 ` Souza, Jose
2021-09-27 16:25 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210923194617.69136-4-jose.souza@intel.com \
--to=jose.souza@intel.com \
--cc=gwan-gyeong.mun@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox