From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 3/7] drm/i915: Hoover the IPS enable/disable calls into the pre/post update hooks
Date: Wed, 9 Feb 2022 13:35:22 +0200 [thread overview]
Message-ID: <20220209113526.7595-3-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20220209113526.7595-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
No reason the caller of the IPS pre/post update hooks should
be responsible for the actual IPS enab/disable. Just pull those
calls into the pre/post update hooks themselves. And while
at it let's adjust the function naming a bit to have a consistent
namespace.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 46 +++++++++++++++-----
drivers/gpu/drm/i915/display/intel_display.h | 2 -
2 files changed, 34 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index c5d30c683911..08c59fdb24e5 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -125,6 +125,7 @@ static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state);
static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state);
static void intel_modeset_setup_hw_state(struct drm_device *dev,
struct drm_modeset_acquire_ctx *ctx);
+static bool hsw_ips_disable(const struct intel_crtc_state *crtc_state);
/**
* intel_update_watermarks - update FIFO watermark values based on current modes
@@ -753,7 +754,7 @@ void intel_plane_disable_noatomic(struct intel_crtc *crtc,
crtc_state->min_cdclk[plane->id] = 0;
if (plane->id == PLANE_PRIMARY &&
- hsw_disable_ips(crtc_state))
+ hsw_ips_disable(crtc_state))
intel_crtc_wait_for_next_vblank(crtc);
/*
@@ -1091,7 +1092,7 @@ static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state)
intel_de_write(dev_priv, PF_WIN_SZ(pipe), width << 16 | height);
}
-void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
+static void hsw_ips_enable(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_device *dev = crtc->base.dev;
@@ -1128,7 +1129,7 @@ void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
}
}
-bool hsw_disable_ips(const struct intel_crtc_state *crtc_state)
+static bool hsw_ips_disable(const struct intel_crtc_state *crtc_state)
{
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
struct drm_device *dev = crtc->base.dev;
@@ -1170,8 +1171,8 @@ static void intel_crtc_dpms_overlay_disable(struct intel_crtc *crtc)
*/
}
-static bool hsw_pre_update_disable_ips(struct intel_atomic_state *state,
- struct intel_crtc *crtc)
+static bool hsw_ips_need_disable(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
const struct intel_crtc_state *old_crtc_state =
@@ -1200,8 +1201,20 @@ static bool hsw_pre_update_disable_ips(struct intel_atomic_state *state,
return !new_crtc_state->ips_enabled;
}
-static bool hsw_post_update_enable_ips(struct intel_atomic_state *state,
- struct intel_crtc *crtc)
+static bool hsw_ips_pre_update(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
+{
+ const struct intel_crtc_state *old_crtc_state =
+ intel_atomic_get_old_crtc_state(state, crtc);
+
+ if (!hsw_ips_need_disable(state, crtc))
+ return false;
+
+ return hsw_ips_disable(old_crtc_state);
+}
+
+static bool hsw_ips_need_enable(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
const struct intel_crtc_state *old_crtc_state =
@@ -1237,6 +1250,18 @@ static bool hsw_post_update_enable_ips(struct intel_atomic_state *state,
return !old_crtc_state->ips_enabled;
}
+static void hsw_ips_post_update(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
+{
+ const struct intel_crtc_state *new_crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
+
+ if (!hsw_ips_need_enable(state, crtc))
+ return;
+
+ hsw_ips_enable(new_crtc_state);
+}
+
static bool needs_nv12_wa(const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
@@ -1331,9 +1356,7 @@ static void intel_post_plane_update(struct intel_atomic_state *state,
if (new_crtc_state->update_wm_post && new_crtc_state->hw.active)
intel_update_watermarks(dev_priv);
- if (hsw_post_update_enable_ips(state, crtc))
- hsw_enable_ips(new_crtc_state);
-
+ hsw_ips_post_update(state, crtc);
intel_fbc_post_update(state, crtc);
intel_drrs_page_flip(state, crtc);
@@ -1436,8 +1459,7 @@ static void intel_pre_plane_update(struct intel_atomic_state *state,
intel_psr_pre_plane_update(state, crtc);
- if (hsw_pre_update_disable_ips(state, crtc) &&
- hsw_disable_ips(old_crtc_state))
+ if (hsw_ips_pre_update(state, crtc))
intel_crtc_wait_for_next_vblank(crtc);
if (intel_fbc_pre_update(state, crtc))
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 8f9bec36898e..2315088a280d 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -633,8 +633,6 @@ void i9xx_crtc_clock_get(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config);
int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n);
bool hsw_crtc_state_ips_capable(const struct intel_crtc_state *crtc_state);
-void hsw_enable_ips(const struct intel_crtc_state *crtc_state);
-bool hsw_disable_ips(const struct intel_crtc_state *crtc_state);
enum intel_display_power_domain intel_port_to_power_domain(enum port port);
enum intel_display_power_domain
intel_aux_power_domain(struct intel_digital_port *dig_port);
--
2.34.1
next prev parent reply other threads:[~2022-02-09 11:35 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 11:35 [Intel-gfx] [PATCH 1/7] drm/i915: Move vblank waits out from IPS code Ville Syrjala
2022-02-09 11:35 ` [Intel-gfx] [PATCH 2/7] drm/i915: Change IPS calling convention Ville Syrjala
2022-02-09 13:17 ` Jani Nikula
2022-02-09 11:35 ` Ville Syrjala [this message]
2022-02-09 13:25 ` [Intel-gfx] [PATCH 3/7] drm/i915: Hoover the IPS enable/disable calls into the pre/post update hooks Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 4/7] drm/i915: Move the IPS code to its own file Ville Syrjala
2022-02-09 13:34 ` Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 5/7] drm/i915: Extract hsw_ips_get_config() Ville Syrjala
2022-02-09 13:35 ` Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 6/7] drm/i915: Fix IPS disable in intel_plane_disable_noatomic() Ville Syrjala
2022-02-09 13:41 ` Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 7/7] drm/i915: Consolidate all pre plane update vblank waits Ville Syrjala
2022-02-09 13:39 ` Jani Nikula
2022-02-09 16:36 ` Murthy, Arun R
2022-02-09 13:15 ` [Intel-gfx] [PATCH 1/7] drm/i915: Move vblank waits out from IPS code Jani Nikula
2022-02-09 14:06 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/7] " Patchwork
2022-02-09 14:08 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-02-09 14:39 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2022-02-09 17:36 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2022-02-09 19:13 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220209113526.7595-3-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox