From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 3/7] drm/i915: Hoover the IPS enable/disable calls into the pre/post update hooks
Date: Wed, 09 Feb 2022 15:25:44 +0200 [thread overview]
Message-ID: <87wni4npd3.fsf@intel.com> (raw)
In-Reply-To: <20220209113526.7595-3-ville.syrjala@linux.intel.com>
On Wed, 09 Feb 2022, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> No reason the caller of the IPS pre/post update hooks should
> be responsible for the actual IPS enab/disable. Just pull those
> calls into the pre/post update hooks themselves. And while
> at it let's adjust the function naming a bit to have a consistent
> namespace.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Seems like some of the calling convention changes here should've been
put in the preceding patch, but not a big deal.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 46 +++++++++++++++-----
> drivers/gpu/drm/i915/display/intel_display.h | 2 -
> 2 files changed, 34 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index c5d30c683911..08c59fdb24e5 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -125,6 +125,7 @@ static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state);
> static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state);
> static void intel_modeset_setup_hw_state(struct drm_device *dev,
> struct drm_modeset_acquire_ctx *ctx);
> +static bool hsw_ips_disable(const struct intel_crtc_state *crtc_state);
>
> /**
> * intel_update_watermarks - update FIFO watermark values based on current modes
> @@ -753,7 +754,7 @@ void intel_plane_disable_noatomic(struct intel_crtc *crtc,
> crtc_state->min_cdclk[plane->id] = 0;
>
> if (plane->id == PLANE_PRIMARY &&
> - hsw_disable_ips(crtc_state))
> + hsw_ips_disable(crtc_state))
> intel_crtc_wait_for_next_vblank(crtc);
>
> /*
> @@ -1091,7 +1092,7 @@ static void ilk_pfit_enable(const struct intel_crtc_state *crtc_state)
> intel_de_write(dev_priv, PF_WIN_SZ(pipe), width << 16 | height);
> }
>
> -void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
> +static void hsw_ips_enable(const struct intel_crtc_state *crtc_state)
> {
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> struct drm_device *dev = crtc->base.dev;
> @@ -1128,7 +1129,7 @@ void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
> }
> }
>
> -bool hsw_disable_ips(const struct intel_crtc_state *crtc_state)
> +static bool hsw_ips_disable(const struct intel_crtc_state *crtc_state)
> {
> struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> struct drm_device *dev = crtc->base.dev;
> @@ -1170,8 +1171,8 @@ static void intel_crtc_dpms_overlay_disable(struct intel_crtc *crtc)
> */
> }
>
> -static bool hsw_pre_update_disable_ips(struct intel_atomic_state *state,
> - struct intel_crtc *crtc)
> +static bool hsw_ips_need_disable(struct intel_atomic_state *state,
> + struct intel_crtc *crtc)
> {
> struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> const struct intel_crtc_state *old_crtc_state =
> @@ -1200,8 +1201,20 @@ static bool hsw_pre_update_disable_ips(struct intel_atomic_state *state,
> return !new_crtc_state->ips_enabled;
> }
>
> -static bool hsw_post_update_enable_ips(struct intel_atomic_state *state,
> - struct intel_crtc *crtc)
> +static bool hsw_ips_pre_update(struct intel_atomic_state *state,
> + struct intel_crtc *crtc)
> +{
> + const struct intel_crtc_state *old_crtc_state =
> + intel_atomic_get_old_crtc_state(state, crtc);
> +
> + if (!hsw_ips_need_disable(state, crtc))
> + return false;
> +
> + return hsw_ips_disable(old_crtc_state);
> +}
> +
> +static bool hsw_ips_need_enable(struct intel_atomic_state *state,
> + struct intel_crtc *crtc)
> {
> struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> const struct intel_crtc_state *old_crtc_state =
> @@ -1237,6 +1250,18 @@ static bool hsw_post_update_enable_ips(struct intel_atomic_state *state,
> return !old_crtc_state->ips_enabled;
> }
>
> +static void hsw_ips_post_update(struct intel_atomic_state *state,
> + struct intel_crtc *crtc)
> +{
> + const struct intel_crtc_state *new_crtc_state =
> + intel_atomic_get_new_crtc_state(state, crtc);
> +
> + if (!hsw_ips_need_enable(state, crtc))
> + return;
> +
> + hsw_ips_enable(new_crtc_state);
> +}
> +
> static bool needs_nv12_wa(const struct intel_crtc_state *crtc_state)
> {
> struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
> @@ -1331,9 +1356,7 @@ static void intel_post_plane_update(struct intel_atomic_state *state,
> if (new_crtc_state->update_wm_post && new_crtc_state->hw.active)
> intel_update_watermarks(dev_priv);
>
> - if (hsw_post_update_enable_ips(state, crtc))
> - hsw_enable_ips(new_crtc_state);
> -
> + hsw_ips_post_update(state, crtc);
> intel_fbc_post_update(state, crtc);
> intel_drrs_page_flip(state, crtc);
>
> @@ -1436,8 +1459,7 @@ static void intel_pre_plane_update(struct intel_atomic_state *state,
>
> intel_psr_pre_plane_update(state, crtc);
>
> - if (hsw_pre_update_disable_ips(state, crtc) &&
> - hsw_disable_ips(old_crtc_state))
> + if (hsw_ips_pre_update(state, crtc))
> intel_crtc_wait_for_next_vblank(crtc);
>
> if (intel_fbc_pre_update(state, crtc))
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 8f9bec36898e..2315088a280d 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -633,8 +633,6 @@ void i9xx_crtc_clock_get(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config);
> int intel_dotclock_calculate(int link_freq, const struct intel_link_m_n *m_n);
> bool hsw_crtc_state_ips_capable(const struct intel_crtc_state *crtc_state);
> -void hsw_enable_ips(const struct intel_crtc_state *crtc_state);
> -bool hsw_disable_ips(const struct intel_crtc_state *crtc_state);
> enum intel_display_power_domain intel_port_to_power_domain(enum port port);
> enum intel_display_power_domain
> intel_aux_power_domain(struct intel_digital_port *dig_port);
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2022-02-09 13:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 11:35 [Intel-gfx] [PATCH 1/7] drm/i915: Move vblank waits out from IPS code Ville Syrjala
2022-02-09 11:35 ` [Intel-gfx] [PATCH 2/7] drm/i915: Change IPS calling convention Ville Syrjala
2022-02-09 13:17 ` Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 3/7] drm/i915: Hoover the IPS enable/disable calls into the pre/post update hooks Ville Syrjala
2022-02-09 13:25 ` Jani Nikula [this message]
2022-02-09 11:35 ` [Intel-gfx] [PATCH 4/7] drm/i915: Move the IPS code to its own file Ville Syrjala
2022-02-09 13:34 ` Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 5/7] drm/i915: Extract hsw_ips_get_config() Ville Syrjala
2022-02-09 13:35 ` Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 6/7] drm/i915: Fix IPS disable in intel_plane_disable_noatomic() Ville Syrjala
2022-02-09 13:41 ` Jani Nikula
2022-02-09 11:35 ` [Intel-gfx] [PATCH 7/7] drm/i915: Consolidate all pre plane update vblank waits Ville Syrjala
2022-02-09 13:39 ` Jani Nikula
2022-02-09 16:36 ` Murthy, Arun R
2022-02-09 13:15 ` [Intel-gfx] [PATCH 1/7] drm/i915: Move vblank waits out from IPS code Jani Nikula
2022-02-09 14:06 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/7] " Patchwork
2022-02-09 14:08 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2022-02-09 14:39 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2022-02-09 17:36 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2022-02-09 19:13 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wni4npd3.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox