From: "Navare, Manasi" <manasi.d.navare@intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH] drm/i915/display/: Refactor hsw_crtc_enable for bigjoiner cleanup
Date: Wed, 16 Mar 2022 10:10:30 -0700 [thread overview]
Message-ID: <20220316171030.GA759@labuser-Z97X-UD5H> (raw)
In-Reply-To: <87ee32pcce.fsf@intel.com>
On Wed, Mar 16, 2022 at 09:48:17AM +0200, Jani Nikula wrote:
> On Tue, 15 Mar 2022, Manasi Navare <manasi.d.navare@intel.com> wrote:
> > This patch abstracts pieces of hsw_crtc_enable corresponding to different
> > Bspec enable sequence steps into separate functions.
> > This helps to call them in a specific order for bigjoiner master/slave
> > in a cleaner fashion.
>
> So does this contain only refactoring or functional changes also? One or
> the other at a time, please, not both.
No this is only refactor, no functional changes here
>
> Also looks like hsw_crtc_* have accumulated just way too many checks for
> platforms instead of having a clean break at e.g. display 9 and/or 11.
These checks were already part of hsw_crtc_enable() function that I have just moved to a separate
function. How do you recommend removing these checks?
>
> Adding references to "enable sequence step 8" is not helpful because
> it's platform specific. (Yeah, I know there are existing references like
> this, but they're also suspect.)
Yes agree, may be I will add the comment for what actually the step 7/8 does?
Manasi
>
>
> BR,
> Jani.
>
>
> >
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Animesh Manna <animesh.manna@intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 125 ++++++++++---------
> > 1 file changed, 66 insertions(+), 59 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index eb49973621f0..d8e6466c9fa0 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -1865,24 +1865,6 @@ static void hsw_set_frame_start_delay(const struct intel_crtc_state *crtc_state)
> > intel_de_write(dev_priv, reg, val);
> > }
> >
> > -static void icl_ddi_bigjoiner_pre_enable(struct intel_atomic_state *state,
> > - const struct intel_crtc_state *crtc_state)
> > -{
> > - struct intel_crtc *master_crtc = intel_master_crtc(crtc_state);
> > -
> > - /*
> > - * Enable sequence steps 1-7 on bigjoiner master
> > - */
> > - if (intel_crtc_is_bigjoiner_slave(crtc_state))
> > - intel_encoders_pre_pll_enable(state, master_crtc);
> > -
> > - if (crtc_state->shared_dpll)
> > - intel_enable_shared_dpll(crtc_state);
> > -
> > - if (intel_crtc_is_bigjoiner_slave(crtc_state))
> > - intel_encoders_pre_enable(state, master_crtc);
> > -}
> > -
> > static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_state)
> > {
> > struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > @@ -1910,70 +1892,73 @@ static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_sta
> > hsw_set_transconf(crtc_state);
> > }
> >
> > -static void hsw_crtc_enable(struct intel_atomic_state *state,
> > - struct intel_crtc *crtc)
> > +static void hsw_crtc_pre_pll_enable(struct intel_atomic_state *state,
> > + const struct intel_crtc_state *crtc_state)
> > {
> > - const struct intel_crtc_state *new_crtc_state =
> > - intel_atomic_get_new_crtc_state(state, crtc);
> > - struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > - enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> > - enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
> > - bool psl_clkgate_wa;
> > -
> > - if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > - return;
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> >
> > - if (!new_crtc_state->bigjoiner_pipes) {
> > - intel_encoders_pre_pll_enable(state, crtc);
> > + /*
> > + * Enable sequence steps 1 - 7 on all pipes
> > + */
> > + intel_encoders_pre_pll_enable(state, crtc);
> > + if (crtc_state->shared_dpll)
> > + intel_enable_shared_dpll(crtc_state);
> >
> > - if (new_crtc_state->shared_dpll)
> > - intel_enable_shared_dpll(new_crtc_state);
> > + intel_encoders_pre_enable(state, crtc);
> > +}
> >
> > - intel_encoders_pre_enable(state, crtc);
> > - } else {
> > - icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
> > - }
> > +static void hsw_crtc_post_pll_enable(struct intel_atomic_state *state,
> > + const struct intel_crtc_state *crtc_state)
> > +{
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > + enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> > + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> > + bool psl_clkgate_wa;
> >
> > - intel_dsc_enable(new_crtc_state);
> > + /*
> > + * Enable sequence step 8
> > + */
> > + intel_dsc_enable(crtc_state);
> >
> > if (DISPLAY_VER(dev_priv) >= 13)
> > - intel_uncompressed_joiner_enable(new_crtc_state);
> > + intel_uncompressed_joiner_enable(crtc_state);
> >
> > - intel_set_pipe_src_size(new_crtc_state);
> > + intel_set_pipe_src_size(crtc_state);
> > if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> > - bdw_set_pipemisc(new_crtc_state);
> > + bdw_set_pipemisc(crtc_state);
> >
> > - if (!intel_crtc_is_bigjoiner_slave(new_crtc_state) &&
> > + if (!intel_crtc_is_bigjoiner_slave(crtc_state) &&
> > !transcoder_is_dsi(cpu_transcoder))
> > - hsw_configure_cpu_transcoder(new_crtc_state);
> > + hsw_configure_cpu_transcoder(crtc_state);
> >
> > crtc->active = true;
> >
> > /* Display WA #1180: WaDisableScalarClockGating: glk */
> > psl_clkgate_wa = DISPLAY_VER(dev_priv) == 10 &&
> > - new_crtc_state->pch_pfit.enabled;
> > + crtc_state->pch_pfit.enabled;
> > if (psl_clkgate_wa)
> > glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);
> >
> > if (DISPLAY_VER(dev_priv) >= 9)
> > - skl_pfit_enable(new_crtc_state);
> > + skl_pfit_enable(crtc_state);
> > else
> > - ilk_pfit_enable(new_crtc_state);
> > + ilk_pfit_enable(crtc_state);
> >
> > /*
> > * On ILK+ LUT must be loaded before the pipe is running but with
> > * clocks enabled
> > */
> > - intel_color_load_luts(new_crtc_state);
> > - intel_color_commit(new_crtc_state);
> > + intel_color_load_luts(crtc_state);
> > + intel_color_commit(crtc_state);
> > /* update DSPCNTR to configure gamma/csc for pipe bottom color */
> > if (DISPLAY_VER(dev_priv) < 9)
> > - intel_disable_primary_plane(new_crtc_state);
> > + intel_disable_primary_plane(crtc_state);
> >
> > - hsw_set_linetime_wm(new_crtc_state);
> > + hsw_set_linetime_wm(crtc_state);
> >
> > if (DISPLAY_VER(dev_priv) >= 11)
> > - icl_set_pipe_chicken(new_crtc_state);
> > + icl_set_pipe_chicken(crtc_state);
> >
> > intel_initial_watermarks(state, crtc);
> >
> > @@ -1984,8 +1969,8 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> > icl_pipe_mbus_enable(crtc, dbuf_state->joined_mbus);
> > }
> >
> > - if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > - intel_crtc_vblank_on(new_crtc_state);
> > + if (intel_crtc_is_bigjoiner_slave(crtc_state))
> > + intel_crtc_vblank_on(crtc_state);
> >
> > intel_encoders_enable(state, crtc);
> >
> > @@ -1996,7 +1981,7 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> >
> > /* If we change the relative order between pipe/planes enabling, we need
> > * to change the workaround. */
> > - hsw_workaround_pipe = new_crtc_state->hsw_workaround_pipe;
> > + hsw_workaround_pipe = crtc_state->hsw_workaround_pipe;
> > if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) {
> > struct intel_crtc *wa_crtc;
> >
> > @@ -2007,6 +1992,29 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> > }
> > }
> >
> > +static void hsw_crtc_enable(struct intel_atomic_state *state,
> > + struct intel_crtc *crtc)
> > +{
> > + const struct intel_crtc_state *new_crtc_state =
> > + intel_atomic_get_new_crtc_state(state, crtc);
> > + struct intel_crtc *slave_crtc;
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > +
> > + if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > + return;
> > +
> > + hsw_crtc_pre_pll_enable(state, new_crtc_state);
> > +
> > + for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, slave_crtc,
> > + intel_crtc_bigjoiner_slave_pipes(new_crtc_state)) {
> > + struct intel_crtc_state *slave_crtc_state =
> > + intel_atomic_get_new_crtc_state(state, slave_crtc);
> > +
> > + hsw_crtc_post_pll_enable(state, slave_crtc_state);
> > + }
> > + hsw_crtc_post_pll_enable(state, new_crtc_state);
> > +}
> > +
> > void ilk_pfit_disable(const struct intel_crtc_state *old_crtc_state)
> > {
> > struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
> > @@ -8122,11 +8130,11 @@ static void intel_enable_crtc(struct intel_atomic_state *state,
> >
> > intel_crtc_update_active_timings(new_crtc_state);
> >
> > - dev_priv->display->crtc_enable(state, crtc);
> > -
> > if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > return;
> >
> > + dev_priv->display->crtc_enable(state, crtc);
> > +
> > intel_drrs_enable(new_crtc_state);
> >
> > /* vblanks work again, re-enable pipe CRC. */
> > @@ -8360,8 +8368,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> > continue;
> >
> > if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
> > - is_trans_port_sync_master(new_crtc_state) ||
> > - intel_crtc_is_bigjoiner_master(new_crtc_state))
> > + is_trans_port_sync_master(new_crtc_state))
> > continue;
> >
> > modeset_pipes &= ~BIT(pipe);
> > @@ -8371,7 +8378,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> >
> > /*
> > * Then we enable all remaining pipes that depend on other
> > - * pipes: MST slaves and port sync masters, big joiner master
> > + * pipes: MST slaves and port sync masters
> > */
> > for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > enum pipe pipe = crtc->pipe;
>
> --
> Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2022-03-16 17:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-15 23:38 [Intel-gfx] [PATCH] drm/i915/display/: Refactor hsw_crtc_enable for bigjoiner cleanup Manasi Navare
2022-03-16 0:41 ` [Intel-gfx] ✓ Fi.CI.BAT: success for " Patchwork
2022-03-16 3:21 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2022-03-16 7:48 ` [Intel-gfx] [PATCH] " Jani Nikula
2022-03-16 17:10 ` Navare, Manasi [this message]
2022-03-17 15:35 ` Jani Nikula
2022-03-17 18:28 ` Navare, Manasi
2022-03-17 18:31 ` Navare, Manasi
2022-03-17 19:15 ` Jani Nikula
2022-03-17 18:52 ` Ville Syrjälä
2022-03-17 19:05 ` Navare, Manasi
2022-03-17 19:14 ` Ville Syrjälä
2022-03-30 0:00 ` Navare, Manasi
2022-03-30 9:53 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220316171030.GA759@labuser-Z97X-UD5H \
--to=manasi.d.navare@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox