Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Suraj Kandpal <suraj.kandpal@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v9 6/7] drm/i915/vdsc: Check slice design requirement
Date: Tue,  7 Feb 2023 13:14:15 +0530	[thread overview]
Message-ID: <20230207074416.3209722-7-suraj.kandpal@intel.com> (raw)
In-Reply-To: <20230207074416.3209722-1-suraj.kandpal@intel.com>

Add function to check if slice design requirements are being
met as defined in Bspec: 49259 in the section
Slice Design Requirement

--v7
-remove full bspec link [Jani]
-rename intel_dsc_check_slice_design_req to
intel_dsc_slice_dimensions_valid [Jani]

--v8
-fix condition to check if slice width and height are
of two
-fix minimum pixel in slice condition

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
---
 drivers/gpu/drm/i915/display/intel_vdsc.c | 32 +++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 13ad853e24eb..6ebefc195e83 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -447,6 +447,29 @@ calculate_rc_params(struct rc_parameters *rc,
 	}
 }
 
+static int intel_dsc_slice_dimensions_valid(struct intel_crtc_state *pipe_config,
+					    struct drm_dsc_config *vdsc_cfg)
+{
+	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_RGB ||
+	    pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) {
+		if (vdsc_cfg->slice_height > 4095)
+			return -EINVAL;
+		if (vdsc_cfg->slice_height * vdsc_cfg->slice_width >= 15000)
+			return -EINVAL;
+	} else if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+		if (vdsc_cfg->slice_width % 2)
+			return -EINVAL;
+		if (vdsc_cfg->slice_height % 2)
+			return -EINVAL;
+		if (vdsc_cfg->slice_height > 4094)
+			return -EINVAL;
+		if (vdsc_cfg->slice_height * vdsc_cfg->slice_width >= 30000)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
 {
 	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
@@ -455,11 +478,20 @@ int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
 	u16 compressed_bpp = pipe_config->dsc.compressed_bpp;
 	const struct rc_parameters *rc_params;
 	struct rc_parameters *rc = NULL;
+	int err;
 	u8 i = 0;
 
 	vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay;
 	vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
 					     pipe_config->dsc.slice_count);
+
+	err = intel_dsc_slice_dimensions_valid(pipe_config, vdsc_cfg);
+
+	if (err) {
+		drm_dbg_kms(&dev_priv->drm, "Slice dimension requirements not met\n");
+		return err;
+	}
+
 	/*
 	 * According to DSC 1.2 specs if colorspace is YCbCr then convert_rgb is 0
 	 * else 1
-- 
2.25.1


  parent reply	other threads:[~2023-02-07  7:45 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-07  7:44 [Intel-gfx] [PATCH v9 0/7] Enable YCbCr420 for VDSC Suraj Kandpal
2023-02-07  7:44 ` [Intel-gfx] [PATCH v9 1/7] drm/dp_helper: Add helper to check if the sink supports given format with DSC Suraj Kandpal
2023-02-20 20:37   ` Shankar, Uma
2023-02-20 20:50     ` Shankar, Uma
2023-02-07  7:44 ` [Intel-gfx] [PATCH v9 2/7] drm/i915/dp: Check if DSC supports the given output_format Suraj Kandpal
2023-02-20 20:49   ` Shankar, Uma
2023-02-07  7:44 ` [Intel-gfx] [PATCH v9 3/7] drm/i915: Adding the new registers for DSC Suraj Kandpal
2023-02-07  7:44 ` [Intel-gfx] [PATCH v9 4/7] drm/i915: Enable YCbCr420 for VDSC Suraj Kandpal
2023-02-07  7:44 ` [Intel-gfx] [PATCH v9 5/7] drm/i915: Fill in native_420 field Suraj Kandpal
2023-02-14 11:50   ` Jani Nikula
2023-02-15  3:02     ` Kandpal, Suraj
2023-02-15  3:17   ` [Intel-gfx] [PATCH v10 " Suraj Kandpal
2023-02-20 21:37     ` Shankar, Uma
2023-02-21  4:40       ` Kandpal, Suraj
2023-02-21  9:15         ` Shankar, Uma
2023-02-07  7:44 ` Suraj Kandpal [this message]
2023-02-20 21:53   ` [Intel-gfx] [PATCH v9 6/7] drm/i915/vdsc: Check slice design requirement Shankar, Uma
2023-02-21  4:20     ` Kandpal, Suraj
2023-02-21  9:11       ` Shankar, Uma
2023-02-07  7:44 ` [Intel-gfx] [PATCH v9 7/7] drm/i915/dsc: Add debugfs entry to validate DSC output formats Suraj Kandpal
2023-02-07  8:35   ` Jani Nikula
2023-02-08 14:16     ` Swati Sharma
2023-02-10 11:31       ` Jani Nikula
2023-02-14 10:51   ` [Intel-gfx] [v10] " Swati Sharma
2023-02-14 10:51     ` Jani Nikula
2023-02-14 11:01       ` Swati Sharma
2023-02-14 11:02   ` [Intel-gfx] [v11] " Swati Sharma
2023-02-20 21:57     ` Shankar, Uma
2023-02-07  8:09 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for Enable YCbCr420 for VDSC Patchwork
2023-02-07  8:27 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-02-07 13:16 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2023-02-14 14:51 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for Enable YCbCr420 for VDSC (rev3) Patchwork
2023-02-14 15:21 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-02-15  3:11 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2023-02-15  3:45 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Enable YCbCr420 for VDSC (rev4) Patchwork
2023-02-15  4:10 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-02-15 15:16 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230207074416.3209722-7-suraj.kandpal@intel.com \
    --to=suraj.kandpal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox