From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com
Subject: [Intel-gfx] [PATCH] drm/i915: Implement UHBR bandwidth check
Date: Mon, 27 Feb 2023 13:20:30 +0200 [thread overview]
Message-ID: <20230227112030.5229-1-stanislav.lisovskiy@intel.com> (raw)
According to spec, we should check if output_bpp * pixel_rate is less
than DDI clock * 72, if UHBR is used.
v2: - s/pipe_config/crtc_state/ (Jani Nikula)
- Merged previous patch into that one, to remove empty function(Jani Nikula)
HSDES: 1406899791
BSPEC: 49259
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp_mst.c | 28 +++++++++++++++++++--
1 file changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index a860cbc5dbea..d0e2e37cd758 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -45,6 +45,26 @@
#include "intel_hotplug.h"
#include "skl_scaler.h"
+static int intel_dp_mst_check_constraints(struct drm_i915_private *i915, int bpp,
+ const struct drm_display_mode *adjusted_mode,
+ struct intel_crtc_state *crtc_state)
+{
+ if (intel_dp_is_uhbr(crtc_state)) {
+ int output_bpp = bpp;
+ /* DisplayPort 2 128b/132b, bits per lane is always 32 */
+ int symbol_clock = crtc_state->port_clock / 32;
+
+ if (output_bpp * adjusted_mode->crtc_clock >=
+ symbol_clock * 72) {
+ drm_dbg_kms(&i915->drm, "UHBR check failed(required bw %d available %d)\n",
+ output_bpp * adjusted_mode->crtc_clock, symbol_clock * 72);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
struct intel_crtc_state *crtc_state,
int max_bpp,
@@ -87,6 +107,10 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
drm_dbg_kms(&i915->drm, "Trying bpp %d\n", bpp);
+ ret = intel_dp_mst_check_constraints(i915, bpp, adjusted_mode, crtc_state);
+ if (ret)
+ continue;
+
slots = drm_dp_atomic_find_time_slots(state, &intel_dp->mst_mgr,
connector->port,
crtc_state->pbn);
@@ -104,8 +128,8 @@ static int intel_dp_mst_find_vcpi_slots_for_bpp(struct intel_encoder *encoder,
}
}
- /* Despite slots are non-zero, we still failed the atomic check */
- if (ret && slots >= 0)
+ /* We failed to find a proper bpp/timeslots, return error */
+ if (ret)
slots = ret;
if (slots < 0) {
--
2.37.3
next reply other threads:[~2023-02-27 11:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-27 11:20 Stanislav Lisovskiy [this message]
2023-02-27 13:25 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915: Implement UHBR bandwidth check (rev2) Patchwork
2023-02-27 15:29 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2023-03-09 12:54 ` [Intel-gfx] [PATCH] drm/i915: Implement UHBR bandwidth check Ville Syrjälä
-- strict thread matches above, loose matches on Subject: below --
2023-03-24 13:51 Stanislav Lisovskiy
2023-04-04 10:56 ` Govindapillai, Vinod
2023-01-13 13:06 Stanislav Lisovskiy
2023-01-13 14:43 ` Ville Syrjälä
2023-01-16 7:51 ` Lisovskiy, Stanislav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230227112030.5229-1-stanislav.lisovskiy@intel.com \
--to=stanislav.lisovskiy@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox