From: Suraj Kandpal <suraj.kandpal@intel.com>
To: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v3 3/7] drm/i915/dsc: Adding the new registers for DSC
Date: Thu, 9 Mar 2023 11:58:51 +0530 [thread overview]
Message-ID: <20230309062855.393087-4-suraj.kandpal@intel.com> (raw)
In-Reply-To: <20230309062855.393087-1-suraj.kandpal@intel.com>
Adding new DSC register which are introducted MTL onwards
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Vandita Kulkarni <Vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
---
.../gpu/drm/i915/display/intel_vdsc_regs.h | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc_regs.h b/drivers/gpu/drm/i915/display/intel_vdsc_regs.h
index 4fd883463752..b71f00b5c761 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_vdsc_regs.h
@@ -46,6 +46,32 @@
_ICL_PIPE_DSS_CTL2_PB, \
_ICL_PIPE_DSS_CTL2_PC)
+/* MTL Display Stream Compression registers */
+#define _MTL_DSC0_PICTURE_PARAMETER_SET_17_PB 0x782B4
+#define _MTL_DSC1_PICTURE_PARAMETER_SET_17_PB 0x783B4
+#define _MTL_DSC0_PICTURE_PARAMETER_SET_17_PC 0x784B4
+#define _MTL_DSC1_PICTURE_PARAMETER_SET_17_PC 0x785B4
+#define MTL_DSC0_PICTURE_PARAMETER_SET_17(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
+ _MTL_DSC0_PICTURE_PARAMETER_SET_17_PB, \
+ _MTL_DSC0_PICTURE_PARAMETER_SET_17_PC)
+#define MTL_DSC1_PICTURE_PARAMETER_SET_17(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
+ _MTL_DSC1_PICTURE_PARAMETER_SET_17_PB, \
+ _MTL_DSC1_PICTURE_PARAMETER_SET_17_PC)
+#define DSC_SL_BPG_OFFSET(offset) ((offset) << 27)
+
+#define _MTL_DSC0_PICTURE_PARAMETER_SET_18_PB 0x782B8
+#define _MTL_DSC1_PICTURE_PARAMETER_SET_18_PB 0x783B8
+#define _MTL_DSC0_PICTURE_PARAMETER_SET_18_PC 0x784B8
+#define _MTL_DSC1_PICTURE_PARAMETER_SET_18_PC 0x785B8
+#define MTL_DSC0_PICTURE_PARAMETER_SET_18(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
+ _MTL_DSC0_PICTURE_PARAMETER_SET_18_PB, \
+ _MTL_DSC0_PICTURE_PARAMETER_SET_18_PC)
+#define MTL_DSC1_PICTURE_PARAMETER_SET_18(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
+ _MTL_DSC1_PICTURE_PARAMETER_SET_18_PB, \
+ _MTL_DSC1_PICTURE_PARAMETER_SET_18_PC)
+#define DSC_NSL_BPG_OFFSET(offset) ((offset) << 16)
+#define DSC_SL_OFFSET_ADJ(offset) ((offset) << 0)
+
/* Icelake Display Stream Compression Registers */
#define DSCA_PICTURE_PARAMETER_SET_0 _MMIO(0x6B200)
#define DSCC_PICTURE_PARAMETER_SET_0 _MMIO(0x6BA00)
@@ -59,6 +85,8 @@
#define ICL_DSC1_PICTURE_PARAMETER_SET_0(pipe) _MMIO_PIPE((pipe) - PIPE_B, \
_ICL_DSC1_PICTURE_PARAMETER_SET_0_PB, \
_ICL_DSC1_PICTURE_PARAMETER_SET_0_PC)
+#define DSC_NATIVE_422_ENABLE BIT(23)
+#define DSC_NATIVE_420_ENABLE BIT(22)
#define DSC_ALT_ICH_SEL (1 << 20)
#define DSC_VBR_ENABLE (1 << 19)
#define DSC_422_ENABLE (1 << 18)
--
2.25.1
next prev parent reply other threads:[~2023-03-09 6:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-09 6:28 [Intel-gfx] [PATCH v3 0/7] Enable YCbCr420 format for VDSC Suraj Kandpal
2023-03-09 6:28 ` [Intel-gfx] [PATCH v3 1/7] drm/dp_helper: Add helper to check DSC support with given o/p format Suraj Kandpal
2023-03-20 8:59 ` Jani Nikula
2023-03-24 15:42 ` Maarten Lankhorst
2023-03-09 6:28 ` [Intel-gfx] [PATCH v3 2/7] drm/i915/dp: Check if DSC supports the given output_format Suraj Kandpal
2023-03-09 6:28 ` Suraj Kandpal [this message]
2023-03-09 6:28 ` [Intel-gfx] [PATCH v3 4/7] drm/i915/dsc: Enable YCbCr420 for VDSC Suraj Kandpal
2023-03-09 6:28 ` [Intel-gfx] [PATCH v3 5/7] drm/i915/dsc: Fill in native_420 field Suraj Kandpal
2023-03-09 6:28 ` [Intel-gfx] [PATCH v3 6/7] drm/i915/vdsc: Check slice design requirement Suraj Kandpal
2023-03-09 6:28 ` [Intel-gfx] [PATCH v3 7/7] drm/i915/dsc: Add debugfs entry to validate DSC output formats Suraj Kandpal
2023-03-09 7:05 ` [Intel-gfx] ✓ Fi.CI.BAT: success for Enable YCbCr420 format for VDSC (rev3) Patchwork
2023-03-10 20:16 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230309062855.393087-4-suraj.kandpal@intel.com \
--to=suraj.kandpal@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox