From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 17/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_dsc_compute_config()
Date: Fri, 6 Oct 2023 16:37:25 +0300 [thread overview]
Message-ID: <20231006133727.1822579-18-imre.deak@intel.com> (raw)
In-Reply-To: <20231006133727.1822579-1-imre.deak@intel.com>
Use the connector's DSC DPCD capabilities in
intel_dp_dsc_compute_config().
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index baab353154e85..f58940c1baf9c 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2150,7 +2150,7 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
/* Calculate Slice count */
if (intel_dp_is_edp(intel_dp)) {
pipe_config->dsc.slice_count =
- drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
+ drm_dp_dsc_sink_max_slice_count(connector->dp.dsc_dpcd,
true);
if (!pipe_config->dsc.slice_count) {
drm_dbg_kms(&dev_priv->drm, "Unsupported Slice Count %d\n",
--
2.39.2
next prev parent reply other threads:[~2023-10-06 13:37 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-06 13:37 [Intel-gfx] [PATCH 00/19] drm/i915: Store DSC DPCD capabilities in the connector Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 01/19] drm/i915/dp: Sanitize DPCD revision check in intel_dp_get_dsc_sink_cap() Imre Deak
2023-10-06 14:59 ` Lisovskiy, Stanislav
2023-10-10 10:14 ` Imre Deak
2023-10-09 14:48 ` Ville Syrjälä
2023-10-10 9:20 ` Imre Deak
2023-10-10 11:25 ` [Intel-gfx] [PATCH v2 " Imre Deak
2023-10-11 17:16 ` [Intel-gfx] [PATCH v3 " Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 02/19] drm/i915/dp: Store DSC DPCD capabilities in the connector Imre Deak
2023-10-09 11:17 ` Lisovskiy, Stanislav
2023-10-10 11:25 ` [Intel-gfx] [PATCH v2 " Imre Deak
2023-10-11 17:16 ` [Intel-gfx] [PATCH v3 " Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 03/19] drm/i915/dp_mst: Set connector DSC capabilities and decompression AUX Imre Deak
2023-10-09 13:51 ` Lisovskiy, Stanislav
2023-10-10 11:25 ` [Intel-gfx] [PATCH v2 " Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 04/19] drm/i915/dp: Use i915/intel connector local variables in i915_dsc_fec_support_show() Imre Deak
2023-10-09 13:58 ` Lisovskiy, Stanislav
2023-10-06 13:37 ` [Intel-gfx] [PATCH 05/19] drm/i915/dp: Use connector DSC DPCD " Imre Deak
2023-10-09 14:04 ` Lisovskiy, Stanislav
2023-10-06 13:37 ` [Intel-gfx] [PATCH 06/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_dsc_compute_max_bpp() Imre Deak
2023-10-09 20:16 ` Lisovskiy, Stanislav
2023-10-06 13:37 ` [Intel-gfx] [PATCH 07/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_supports_fec() Imre Deak
2023-10-09 20:17 ` Lisovskiy, Stanislav
2023-10-06 13:37 ` [Intel-gfx] [PATCH 08/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_supports_dsc() Imre Deak
2023-10-09 20:18 ` Lisovskiy, Stanislav
2023-10-06 13:37 ` [Intel-gfx] [PATCH 09/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_dsc_max_sink_compressed_bppx16() Imre Deak
2023-10-09 20:19 ` Lisovskiy, Stanislav
2023-10-06 13:37 ` [Intel-gfx] [PATCH 10/19] drm/i915/dp: Pass connector DSC DPCD to drm_dp_dsc_sink_supported_input_bpcs() Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 11/19] drm/i915/dp: Pass only the required i915 to intel_dp_source_dsc_version_minor() Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 12/19] drm/i915/dp: Pass only the required DSC DPCD to intel_dp_sink_dsc_version_minor() Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 13/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_dsc_compute_params() Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 14/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_dsc_supports_format() Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 15/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_dsc_get_slice_count() Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 16/19] drm/i915/dp: Use connector DSC DPCD in intel_dp_mode_valid() Imre Deak
2023-10-06 13:37 ` Imre Deak [this message]
2023-10-06 13:37 ` [Intel-gfx] [PATCH 18/19] drm/i915/dp_mst: Use connector DSC DPCD in intel_dp_mst_mode_valid_ctx() Imre Deak
2023-10-06 13:37 ` [Intel-gfx] [PATCH 19/19] drm/i915/dp: Remove unused DSC caps from intel_dp Imre Deak
2023-10-09 14:05 ` Lisovskiy, Stanislav
2023-10-10 11:25 ` [Intel-gfx] [PATCH v2 " Imre Deak
2023-10-11 17:16 ` [Intel-gfx] [PATCH v3 " Imre Deak
2023-10-06 17:56 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Store DSC DPCD capabilities in the connector Patchwork
2023-10-06 18:10 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-10-07 7:23 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-10-10 16:17 ` [Intel-gfx] [PATCH 00/19] " Ville Syrjälä
2023-10-10 21:50 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Store DSC DPCD capabilities in the connector (rev5) Patchwork
2023-10-10 22:04 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-10-11 10:02 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-10-13 5:33 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Store DSC DPCD capabilities in the connector (rev9) Patchwork
2023-10-13 5:51 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-10-14 5:20 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2023-10-16 14:15 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231006133727.1822579-18-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox