Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Jouni Högander" <jouni.hogander@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: animesh.manna@intel.com, mika.kahola@intel.com,
	"Jouni Högander" <jouni.hogander@intel.com>
Subject: [PATCH v3 11/20] drm/i915/psr: enable sink for eDP1.5 Panel Replay
Date: Mon, 27 May 2024 10:22:11 +0300	[thread overview]
Message-ID: <20240527072220.3294769-12-jouni.hogander@intel.com> (raw)
In-Reply-To: <20240527072220.3294769-1-jouni.hogander@intel.com>

eDP1.5 allows Panel Replay on eDP as well. Take this into account when
enabling sink PSR/Panel Replay. Write also PANEL_REPLAY_CONFIG2 register
accordingly.

Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
---
 drivers/gpu/drm/i915/display/intel_psr.c | 63 +++++++++++++++++-------
 1 file changed, 46 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index fcf73a5cbfc2..16e06312a8be 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -692,6 +692,23 @@ static unsigned int intel_psr_get_enable_sink_offset(struct intel_dp *intel_dp)
 		PANEL_REPLAY_CONFIG : DP_PSR_EN_CFG;
 }
 
+static void intel_psr_enable_sink_alpm(struct intel_dp *intel_dp,
+				       const struct intel_crtc_state *crtc_state)
+{
+	u32 val;
+
+	if (!crtc_state->has_sel_update && (!crtc_state->has_panel_replay ||
+					    !intel_dp_is_edp(intel_dp)))
+		return;
+
+	val = DP_ALPM_ENABLE | DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE;
+
+	if (crtc_state->has_panel_replay)
+		val |= DP_ALPM_MODE_AUX_LESS;
+
+	drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG, val);
+}
+
 /*
  * Note: Most of the bits are same in PANEL_REPLAY_CONFIG and DP_PSR_EN_CFG. We
  * are relying on PSR definitions on these "common" bits.
@@ -700,43 +717,55 @@ void intel_psr_enable_sink(struct intel_dp *intel_dp,
 			   const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
-	u8 dpcd_val = DP_PSR_ENABLE;
+	u8 enable_val = DP_PSR_ENABLE;
+	u8 panel_replay_config2 = 0;
+
+	intel_psr_enable_sink_alpm(intel_dp, crtc_state);
 
 	if (crtc_state->has_sel_update) {
-		/* Enable ALPM at sink for psr2 */
-		if (!crtc_state->has_panel_replay) {
-			drm_dp_dpcd_writeb(&intel_dp->aux,
-					   DP_RECEIVER_ALPM_CONFIG,
-					   DP_ALPM_ENABLE |
-					   DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE);
+		/* PSR2 and Panel Replay SU on eDP */
+		if (intel_dp_is_edp(intel_dp)) {
+			if (crtc_state->req_psr2_sdp_prior_scanline) {
+				if (crtc_state->has_panel_replay)
+					panel_replay_config2 |=
+						DP_PANEL_REPLAY_SU_REGION_SCANLINE_CAPTURE;
+				else
+					enable_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
+			}
 
 			if (psr2_su_region_et_valid(intel_dp,
 						    intel_dp->psr.panel_replay_enabled))
-				dpcd_val |= DP_PSR_ENABLE_SU_REGION_ET;
+				enable_val |= DP_PSR_ENABLE_SU_REGION_ET;
 		}
 
-		dpcd_val |= DP_PSR_ENABLE_PSR2 | DP_PSR_IRQ_HPD_WITH_CRC_ERRORS;
+		enable_val |= DP_PSR_ENABLE_PSR2 | DP_PSR_IRQ_HPD_WITH_CRC_ERRORS;
 	} else {
+		/* PSR2 and Panel Replay Full Frame Update */
 		if (intel_dp->psr.link_standby)
-			dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
+			enable_val |= DP_PSR_MAIN_LINK_ACTIVE;
 
 		if (!crtc_state->has_panel_replay && DISPLAY_VER(dev_priv) >= 8)
-			dpcd_val |= DP_PSR_CRC_VERIFICATION;
+			enable_val |= DP_PSR_CRC_VERIFICATION;
 	}
 
-	if (crtc_state->has_panel_replay)
-		dpcd_val |= DP_PANEL_REPLAY_UNRECOVERABLE_ERROR_EN |
+	if (crtc_state->has_panel_replay) {
+		enable_val |= DP_PANEL_REPLAY_UNRECOVERABLE_ERROR_EN |
 			DP_PANEL_REPLAY_RFB_STORAGE_ERROR_EN;
 
-	if (crtc_state->req_psr2_sdp_prior_scanline)
-		dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
+		if (intel_dp_is_edp(intel_dp))
+			enable_val |= DP_PANEL_REPLAY_VSC_SDP_CRC_EN;
+	}
 
 	if (intel_dp->psr.entry_setup_frames > 0)
-		dpcd_val |= DP_PSR_FRAME_CAPTURE;
+		enable_val |= DP_PSR_FRAME_CAPTURE;
 
 	drm_dp_dpcd_writeb(&intel_dp->aux,
 			   intel_psr_get_enable_sink_offset(intel_dp),
-			   dpcd_val);
+			   enable_val);
+
+	if (crtc_state->has_panel_replay && intel_dp_is_edp(intel_dp))
+		drm_dp_dpcd_writeb(&intel_dp->aux, PANEL_REPLAY_CONFIG2,
+				   panel_replay_config2);
 
 	if (intel_dp_is_edp(intel_dp))
 		drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
-- 
2.34.1


  parent reply	other threads:[~2024-05-27  7:23 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-27  7:22 [PATCH v3 00/20] Panel Replay eDP support Jouni Högander
2024-05-27  7:22 ` [PATCH v3 01/20] drm/i915/psr: Store pr_dpcd in intel_dp Jouni Högander
2024-05-28  6:27   ` Manna, Animesh
2024-05-27  7:22 ` [PATCH v3 02/20] drm/panel replay: Add edp1.5 Panel Replay bits and register Jouni Högander
2024-05-28  6:28   ` Manna, Animesh
2024-05-28 13:02   ` Maarten Lankhorst
2024-05-27  7:22 ` [PATCH v3 03/20] drm/i915/psr: Move printing sink PSR support to own function Jouni Högander
2024-05-28  6:29   ` Manna, Animesh
2024-05-27  7:22 ` [PATCH v3 04/20] drm/i915/psr: Move printing PSR mode " Jouni Högander
2024-05-28  6:30   ` Manna, Animesh
2024-05-27  7:22 ` [PATCH v3 05/20] drm/i915/psr: modify psr status debugfs to support eDP Panel Replay Jouni Högander
2024-05-28  6:40   ` Manna, Animesh
2024-05-27  7:22 ` [PATCH v3 06/20] drm/i915/psr: Add Panel Replay support to intel_psr2_config_et_valid Jouni Högander
2024-05-29  7:20   ` Manna, Animesh
2024-05-27  7:22 ` [PATCH v3 07/20] drm/i915/psr: Add Early Transport into psr debugfs interface Jouni Högander
2024-05-29  7:21   ` Manna, Animesh
2024-05-27  7:22 ` [PATCH v3 08/20] drm/display: Add missing aux less alpm wake related bits Jouni Högander
2024-05-27  7:22 ` [PATCH v3 09/20] drm/i915/psr: Check panel ALPM capability for eDP Panel Replay Jouni Högander
2024-05-27  7:22 ` [PATCH v3 10/20] drm/i915/psr: Inform Panel Replay source support on eDP as well Jouni Högander
2024-05-27  7:22 ` Jouni Högander [this message]
2024-05-27  7:22 ` [PATCH v3 12/20] drm/i915/psr: Check panel Early Transport capability for eDP PR Jouni Högander
2024-05-27  7:22 ` [PATCH v3 13/20] drm/i915/psr: Perfrom psr2 checks related to ALPM for Panel Replay Jouni Högander
2024-05-27  7:22 ` [PATCH v3 14/20] drm/i915/psr: Add Panel Replay compute_config helper Jouni Högander
2024-05-27  7:22 ` [PATCH v3 15/20] drm/i915/psr: 128b/132b Panel Replay is not supported on eDP Jouni Högander
2024-05-27  7:22 ` [PATCH v3 16/20] drm/i915/psr: HW will not allow PR on eDP when HDCP enabled Jouni Högander
2024-05-27  7:22 ` [PATCH v3 17/20] drm/i915/psr: Check Early Transport for Panel Replay as well Jouni Högander
2024-05-27  7:22 ` [PATCH v3 18/20] drm/i915/psr: Modify dg2_activate_panel_replay to support eDP Jouni Högander
2024-05-27  7:22 ` [PATCH v3 19/20] drm/i915/psr: Add new debug bit to disable Panel Replay Jouni Högander
2024-05-27  7:22 ` [PATCH v3 20/20] Revert "drm/i915/psr: Disable early transport by default" Jouni Högander
2024-05-27  7:50 ` ✗ Fi.CI.CHECKPATCH: warning for Panel Replay eDP support (rev3) Patchwork
2024-05-27  7:50 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-05-27  8:08 ` ✗ Fi.CI.BAT: failure " Patchwork
2024-05-27 10:25 ` ✗ Fi.CI.CHECKPATCH: warning for Panel Replay eDP support (rev4) Patchwork
2024-05-27 10:25 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-05-27 10:35 ` ✗ Fi.CI.BAT: failure " Patchwork
2024-05-27 11:25 ` ✓ Fi.CI.BAT: success " Patchwork
2024-05-27 16:15 ` ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240527072220.3294769-12-jouni.hogander@intel.com \
    --to=jouni.hogander@intel.com \
    --cc=animesh.manna@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=mika.kahola@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox