From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH v3 02/21] drm/i915/dp: Move link train params to a substruct in intel_dp
Date: Mon, 10 Jun 2024 19:49:14 +0300 [thread overview]
Message-ID: <20240610164933.2947366-3-imre.deak@intel.com> (raw)
In-Reply-To: <20240610164933.2947366-1-imre.deak@intel.com>
For clarity move the link training parameters updated during link
training based on the pass/fail LT result under a substruct in intel_dp.
This prepares for later patches in this patchset adding similar params
here. Rename intel_dp_reset_max_link_params() to
intel_dp_reset_link_params() to better reflect what state gets reset.
v2: Add the parameters to a more generic link substruct. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
.../drm/i915/display/intel_display_types.h | 13 ++++----
drivers/gpu/drm/i915/display/intel_dp.c | 30 +++++++++----------
2 files changed, 23 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 83d6a3d901fd7..a725c2c9bdfc5 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1733,7 +1733,6 @@ struct intel_dp {
u8 lane_count;
u8 sink_count;
bool link_trained;
- bool reset_link_params;
bool use_max_params;
u8 dpcd[DP_RECEIVER_CAP_SIZE];
u8 psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
@@ -1755,10 +1754,14 @@ struct intel_dp {
/* intersection of source and sink rates */
int num_common_rates;
int common_rates[DP_MAX_SUPPORTED_RATES];
- /* Max lane count for the current link */
- int max_link_lane_count;
- /* Max rate for the current link */
- int max_link_rate;
+ struct {
+ /* TODO: move the rest of link specific fields to here */
+ /* Max lane count for the current link */
+ int max_lane_count;
+ /* Max rate for the current link */
+ int max_rate;
+ } link;
+ bool reset_link_params;
int mso_link_count;
int mso_pixel_overlap;
/* sink or branch descriptor */
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index fd054e16850da..f93c98ac97b05 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -373,13 +373,13 @@ int intel_dp_max_common_lane_count(struct intel_dp *intel_dp)
int intel_dp_max_lane_count(struct intel_dp *intel_dp)
{
- switch (intel_dp->max_link_lane_count) {
+ switch (intel_dp->link.max_lane_count) {
case 1:
case 2:
case 4:
- return intel_dp->max_link_lane_count;
+ return intel_dp->link.max_lane_count;
default:
- MISSING_CASE(intel_dp->max_link_lane_count);
+ MISSING_CASE(intel_dp->link.max_lane_count);
return 1;
}
}
@@ -645,7 +645,7 @@ static bool intel_dp_link_params_valid(struct intel_dp *intel_dp, int link_rate,
* boot-up.
*/
if (link_rate == 0 ||
- link_rate > intel_dp->max_link_rate)
+ link_rate > intel_dp->link.max_rate)
return false;
if (lane_count == 0 ||
@@ -706,8 +706,8 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
"Retrying Link training for eDP with same parameters\n");
return 0;
}
- intel_dp->max_link_rate = intel_dp_common_rate(intel_dp, index - 1);
- intel_dp->max_link_lane_count = lane_count;
+ intel_dp->link.max_rate = intel_dp_common_rate(intel_dp, index - 1);
+ intel_dp->link.max_lane_count = lane_count;
} else if (lane_count > 1) {
if (intel_dp_is_edp(intel_dp) &&
!intel_dp_can_link_train_fallback_for_edp(intel_dp,
@@ -717,8 +717,8 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp,
"Retrying Link training for eDP with same parameters\n");
return 0;
}
- intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
- intel_dp->max_link_lane_count = lane_count >> 1;
+ intel_dp->link.max_rate = intel_dp_max_common_rate(intel_dp);
+ intel_dp->link.max_lane_count = lane_count >> 1;
} else {
drm_err(&i915->drm, "Link Training Unsuccessful\n");
return -1;
@@ -1383,7 +1383,7 @@ intel_dp_max_link_rate(struct intel_dp *intel_dp)
{
int len;
- len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->max_link_rate);
+ len = intel_dp_common_len_rate_limit(intel_dp, intel_dp->link.max_rate);
return intel_dp_common_rate(intel_dp, len - 1);
}
@@ -3019,10 +3019,10 @@ void intel_dp_set_link_params(struct intel_dp *intel_dp,
intel_dp->lane_count = lane_count;
}
-static void intel_dp_reset_max_link_params(struct intel_dp *intel_dp)
+static void intel_dp_reset_link_params(struct intel_dp *intel_dp)
{
- intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
- intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
+ intel_dp->link.max_lane_count = intel_dp_max_common_lane_count(intel_dp);
+ intel_dp->link.max_rate = intel_dp_max_common_rate(intel_dp);
}
/* Enable backlight PWM and backlight PP control. */
@@ -3357,7 +3357,7 @@ void intel_dp_sync_state(struct intel_encoder *encoder,
intel_dp_tunnel_resume(intel_dp, crtc_state, dpcd_updated);
if (crtc_state)
- intel_dp_reset_max_link_params(intel_dp);
+ intel_dp_reset_link_params(intel_dp);
}
bool intel_dp_initial_fastset_check(struct intel_encoder *encoder,
@@ -5892,7 +5892,7 @@ intel_dp_detect(struct drm_connector *connector,
* supports link training fallback params.
*/
if (intel_dp->reset_link_params || intel_dp->is_mst) {
- intel_dp_reset_max_link_params(intel_dp);
+ intel_dp_reset_link_params(intel_dp);
intel_dp->reset_link_params = false;
}
@@ -6746,7 +6746,7 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
intel_dp_set_source_rates(intel_dp);
intel_dp_set_common_rates(intel_dp);
- intel_dp_reset_max_link_params(intel_dp);
+ intel_dp_reset_link_params(intel_dp);
/* init MST on ports that can support it */
intel_dp_mst_encoder_init(dig_port,
--
2.43.3
next prev parent reply other threads:[~2024-06-10 16:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 16:49 [PATCH v3 00/21] drm/i915/dp_mst: Enable link training fallback Imre Deak
2024-06-10 16:49 ` [PATCH v3 01/21] drm/i915/dp_mst: Align TUs to avoid splitting symbols across MTPs Imre Deak
2024-06-10 16:49 ` Imre Deak [this message]
2024-06-10 16:49 ` [PATCH v3 03/21] drm/i915/dp: Move link train fallback to intel_dp_link_training.c Imre Deak
2024-06-10 16:49 ` [PATCH v3 04/21] drm/i915/dp: Sanitize intel_dp_get_link_train_fallback_values() Imre Deak
2024-06-10 16:49 ` [PATCH v3 05/21] drm/i915: Factor out function to modeset commit a set of pipes Imre Deak
2024-06-10 16:49 ` [PATCH v3 06/21] drm/i915/dp: Use a commit modeset for link retraining MST links Imre Deak
2024-06-10 16:49 ` [PATCH v3 07/21] drm/i915/dp: Recheck link state after modeset Imre Deak
2024-06-10 18:14 ` [PATCH v4 " Imre Deak
2024-06-10 16:49 ` [PATCH v3 08/21] drm/i915/dp: Reduce link params only after retrying with unchanged params Imre Deak
2024-06-10 16:49 ` [PATCH v3 09/21] drm/i915/dp: Pass atomic state to link training function Imre Deak
2024-06-10 16:49 ` [PATCH v3 10/21] drm/i915/dp: Send a link training modeset-retry uevent to all MST connectors Imre Deak
2024-06-10 16:49 ` [PATCH v3 11/21] drm/i915/dp: Use check link state work in the hotplug handler Imre Deak
2024-06-10 16:49 ` [PATCH v3 12/21] drm/i915/dp: Use check link state work in the detect handler Imre Deak
2024-06-10 16:49 ` [PATCH v3 13/21] drm/i915/dp: Use check link state work in the HPD IRQ handler Imre Deak
2024-06-10 16:49 ` [PATCH v3 14/21] drm/i915/dp: Disable link retraining after the last fallback step Imre Deak
2024-06-10 16:49 ` [PATCH v3 15/21] drm/i915/dp_mst: Reset intel_dp->link_trained during disabling Imre Deak
2024-06-10 16:49 ` [PATCH v3 16/21] drm/i915/dp_mst: Enable link training fallback for MST Imre Deak
2024-06-10 16:49 ` [PATCH v3 17/21] drm/i915/dp: Add debugfs entries to force the link rate/lane count Imre Deak
2024-06-10 16:49 ` [PATCH v3 18/21] drm/i915/dp: Add debugfs entries to get the max " Imre Deak
2024-06-10 16:49 ` [PATCH v3 19/21] drm/i915/dp: Add debugfs entry to force link training failure Imre Deak
2024-06-10 16:49 ` [PATCH v3 20/21] drm/i915/dp: Add debugfs entry to force link retrain Imre Deak
2024-06-10 16:49 ` [PATCH v3 21/21] drm/i915/dp: Add debugfs entry to get the link retrain disabled state Imre Deak
2024-06-10 17:43 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp_mst: Enable link training fallback (rev4) Patchwork
2024-06-10 17:43 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-06-10 17:51 ` ✗ Fi.CI.BAT: failure " Patchwork
2024-06-10 19:29 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dp_mst: Enable link training fallback (rev5) Patchwork
2024-06-10 19:30 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-06-10 19:39 ` ✓ Fi.CI.BAT: success " Patchwork
2024-06-11 7:15 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-06-13 19:40 ` Imre Deak
2024-06-12 12:29 ` [PATCH v3 00/21] drm/i915/dp_mst: Enable link training fallback Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240610164933.2947366-3-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox