[PATCH 4/9] drm/panel: panel-orisetech-otm8009a: Use backlight power constants

[Thomas Zimmermann <tzimmermann@suse.de>]

Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality or semantics.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
---
 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index 93183f30d7d6..a9b5dad70bc1 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -389,7 +389,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
 		return -ENXIO;
 	}
 
-	if (bd->props.power <= FB_BLANK_NORMAL) {
+	if (bd->props.power <= BACKLIGHT_POWER_REDUCED) {
 		/* Power on the backlight with the requested brightness
 		 * Note We can not use mipi_dsi_dcs_set_display_brightness()
 		 * as otm8009a driver support only 8-bit brightness (1 param).
@@ -465,7 +465,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 
 	ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
 	ctx->bl_dev->props.brightness = OTM8009A_BACKLIGHT_DEFAULT;
-	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+	ctx->bl_dev->props.power = BACKLIGHT_POWER_OFF;
 	ctx->bl_dev->props.type = BACKLIGHT_RAW;
 
 	drm_panel_add(&ctx->panel);
-- 
2.45.2