From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH 5/9] drm/i915/pfit: Reject cloning when using pfit on ILK-BDW
Date: Wed, 16 Oct 2024 17:31:30 +0300 [thread overview]
Message-ID: <20241016143134.26903-6-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20241016143134.26903-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
The panel fitter lives inside the pipe and so would affect all cloned
outputs. However the relevant properties (scaling mode, TV margins)
are per-connector so we could end up with a situation where each cloned
output wants a different pfit configuration. Let's just reject pfit
usage with cloning entirely.
Currently not an issue as we don't yet expose the TV margin
properties, but if/when we add those to HDMI we could end up
in this situation. For eDP/DP we don't support cloning anyyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_panel.c | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index dc843892b01b..593e41907d53 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -474,6 +474,29 @@ static int intel_pch_pfit_check_timings(const struct intel_crtc_state *crtc_stat
return 0;
}
+static int intel_pch_pfit_check_cloning(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_display *display = to_intel_display(crtc_state);
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+
+ /*
+ * The panel fitter is in the pipe and thus would affect every
+ * cloned output. The relevant properties (scaling mode, TV
+ * margins) are per-connector so we'd have to make sure each
+ * output sets them up identically. Seems like a very niche use
+ * case so let's just reject cloning entirely when pfit is used.
+ */
+ if (crtc_state->uapi.encoder_mask &&
+ !is_power_of_2(crtc_state->uapi.encoder_mask)) {
+ drm_dbg_kms(display->drm,
+ "[CRTC:%d:%s] no pfit when cloning\n",
+ crtc->base.base.id, crtc->base.name);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* adjusted_mode has been preset to be the panel's fixed mode */
static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
@@ -564,6 +587,10 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
if (ret)
return ret;
+ ret = intel_pch_pfit_check_cloning(crtc_state);
+ if (ret)
+ return ret;
+
return 0;
}
--
2.45.2
next prev parent reply other threads:[~2024-10-16 14:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-16 14:31 [PATCH 0/9] drm/i915/pfit: Panel fitter stuff Ville Syrjala
2024-10-16 14:31 ` [PATCH 1/9] drm/i915/pfit: Check pipe source size against pfit limits on ILK-BDW Ville Syrjala
2024-10-22 8:24 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 2/9] drm/i915/pfit: Check pfit scaling factors " Ville Syrjala
2024-10-22 8:24 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 3/9] drm/i915/pfit: Reject pfit downscaling for GMCH platforms Ville Syrjala
2024-10-22 8:25 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 4/9] drm/i915/pfit: Check pfit minimum timings in pre-SKL Ville Syrjala
2024-10-22 8:25 ` Jani Nikula
2024-10-16 14:31 ` Ville Syrjala [this message]
2024-10-22 8:25 ` [PATCH 5/9] drm/i915/pfit: Reject cloning when using pfit on ILK-BDW Jani Nikula
2024-10-16 14:31 ` [PATCH 6/9] drm/i915/pfit: Check pfit destination window " Ville Syrjala
2024-10-22 8:26 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 7/9] drm/i915/panel: Convert panel code to intel_display Ville Syrjala
2024-10-22 8:26 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 8/9] drm/i915/pfit: Extract intel_pfit.c Ville Syrjala
2024-10-22 8:31 ` Jani Nikula
2024-10-23 15:38 ` Ville Syrjälä
2024-10-16 14:31 ` [PATCH 9/9] drm/i915: Remove ckey/format checks from skl_update_scaler_plane() Ville Syrjala
2024-10-22 9:04 ` Jani Nikula
2024-10-16 19:58 ` ✓ Fi.CI.BAT: success for drm/i915/pfit: Panel fitter stuff Patchwork
2024-10-16 19:59 ` ✗ Fi.CI.CHECKPATCH: warning " Patchwork
2024-10-16 19:59 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-10-16 22:16 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241016143134.26903-6-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox