From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/9] drm/i915/pfit: Check pfit scaling factors on ILK-BDW
Date: Tue, 22 Oct 2024 11:24:59 +0300 [thread overview]
Message-ID: <87msiwwnms.fsf@intel.com> (raw)
In-Reply-To: <20241016143134.26903-3-ville.syrjala@linux.intel.com>
On Wed, 16 Oct 2024, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Make sure we're not exceeding the max scaling factors for the panel
> fitter on ILK-BDW. SKL+ is skipped here since this is all supposed to
> be handled by the unified scaler code.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_panel.c | 39 ++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
> index b77017144818..fb7def772376 100644
> --- a/drivers/gpu/drm/i915/display/intel_panel.c
> +++ b/drivers/gpu/drm/i915/display/intel_panel.c
> @@ -421,6 +421,41 @@ static int intel_pch_pfit_check_src_size(const struct intel_crtc_state *crtc_sta
> return 0;
> }
>
> +static int intel_pch_pfit_check_scaling(const struct intel_crtc_state *crtc_state)
> +{
> + struct intel_display *display = to_intel_display(crtc_state);
> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> + const struct drm_rect *dst = &crtc_state->pch_pfit.dst;
> + int pipe_src_w = drm_rect_width(&crtc_state->pipe_src);
> + int pipe_src_h = drm_rect_height(&crtc_state->pipe_src);
> + int hscale, vscale, max_scale = 0x12000; /* 1.125 */
> + struct drm_rect src;
> +
> + drm_rect_init(&src, 0, 0, pipe_src_w << 16, pipe_src_h << 16);
> +
> + hscale = drm_rect_calc_hscale(&src, dst, 0, max_scale);
> + if (hscale < 0) {
> + drm_dbg_kms(display->drm,
> + "[CRTC:%d:%s] pfit horizontal downscaling (%d->%d) exceeds max (0x%x)\n",
> + crtc->base.base.id, crtc->base.name,
> + pipe_src_w, drm_rect_width(dst),
> + max_scale);
> + return hscale;
> + }
> +
> + vscale = drm_rect_calc_vscale(&src, dst, 0, max_scale);
> + if (vscale < 0) {
> + drm_dbg_kms(display->drm,
> + "[CRTC:%d:%s] pfit vertical downscaling (%d->%d) exceeds max (0x%x)\n",
> + crtc->base.base.id, crtc->base.name,
> + pipe_src_h, drm_rect_height(dst),
> + max_scale);
> + return vscale;
> + }
> +
> + return 0;
> +}
> +
> /* adjusted_mode has been preset to be the panel's fixed mode */
> static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state)
> @@ -503,6 +538,10 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
> if (ret)
> return ret;
>
> + ret = intel_pch_pfit_check_scaling(crtc_state);
> + if (ret)
> + return ret;
> +
> return 0;
> }
--
Jani Nikula, Intel
next prev parent reply other threads:[~2024-10-22 8:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-16 14:31 [PATCH 0/9] drm/i915/pfit: Panel fitter stuff Ville Syrjala
2024-10-16 14:31 ` [PATCH 1/9] drm/i915/pfit: Check pipe source size against pfit limits on ILK-BDW Ville Syrjala
2024-10-22 8:24 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 2/9] drm/i915/pfit: Check pfit scaling factors " Ville Syrjala
2024-10-22 8:24 ` Jani Nikula [this message]
2024-10-16 14:31 ` [PATCH 3/9] drm/i915/pfit: Reject pfit downscaling for GMCH platforms Ville Syrjala
2024-10-22 8:25 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 4/9] drm/i915/pfit: Check pfit minimum timings in pre-SKL Ville Syrjala
2024-10-22 8:25 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 5/9] drm/i915/pfit: Reject cloning when using pfit on ILK-BDW Ville Syrjala
2024-10-22 8:25 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 6/9] drm/i915/pfit: Check pfit destination window " Ville Syrjala
2024-10-22 8:26 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 7/9] drm/i915/panel: Convert panel code to intel_display Ville Syrjala
2024-10-22 8:26 ` Jani Nikula
2024-10-16 14:31 ` [PATCH 8/9] drm/i915/pfit: Extract intel_pfit.c Ville Syrjala
2024-10-22 8:31 ` Jani Nikula
2024-10-23 15:38 ` Ville Syrjälä
2024-10-16 14:31 ` [PATCH 9/9] drm/i915: Remove ckey/format checks from skl_update_scaler_plane() Ville Syrjala
2024-10-22 9:04 ` Jani Nikula
2024-10-16 19:58 ` ✓ Fi.CI.BAT: success for drm/i915/pfit: Panel fitter stuff Patchwork
2024-10-16 19:59 ` ✗ Fi.CI.CHECKPATCH: warning " Patchwork
2024-10-16 19:59 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-10-16 22:16 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87msiwwnms.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox