From: Gustavo Sousa <gustavo.sousa@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: Luca Coelho <luciano.coelho@intel.com>,
Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH v3 10/18] drm/i915/dmc_wl: Allow simpler syntax for single reg in range tables
Date: Thu, 7 Nov 2024 15:27:15 -0300 [thread overview]
Message-ID: <20241107182921.102193-11-gustavo.sousa@intel.com> (raw)
In-Reply-To: <20241107182921.102193-1-gustavo.sousa@intel.com>
Allow simpler syntax for defining entries for single registers in range
tables. That makes them easier to type as well as to read, allowing one
to quickly tell whether a range actually refers to a single register or
a "true range".
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
---
drivers/gpu/drm/i915/display/intel_dmc_wl.c | 118 ++++++++++----------
1 file changed, 60 insertions(+), 58 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dmc_wl.c b/drivers/gpu/drm/i915/display/intel_dmc_wl.c
index db01b65cb05d..4a182a049374 100644
--- a/drivers/gpu/drm/i915/display/intel_dmc_wl.c
+++ b/drivers/gpu/drm/i915/display/intel_dmc_wl.c
@@ -58,82 +58,82 @@ static struct intel_dmc_wl_range powered_off_ranges[] = {
};
static struct intel_dmc_wl_range xe3lpd_dc5_dc6_dmc_ranges[] = {
- { .start = 0x45500, .end = 0x45500 }, /* DC_STATE_SEL */
+ { .start = 0x45500 }, /* DC_STATE_SEL */
{ .start = 0x457a0, .end = 0x457b0 }, /* DC*_RESIDENCY_COUNTER */
- { .start = 0x45504, .end = 0x45504 }, /* DC_STATE_EN */
+ { .start = 0x45504 }, /* DC_STATE_EN */
{ .start = 0x45400, .end = 0x4540c }, /* PWR_WELL_CTL_* */
- { .start = 0x454f0, .end = 0x454f0 }, /* RETENTION_CTRL */
+ { .start = 0x454f0 }, /* RETENTION_CTRL */
/* DBUF_CTL_* */
- { .start = 0x44300, .end = 0x44300 },
- { .start = 0x44304, .end = 0x44304 },
- { .start = 0x44f00, .end = 0x44f00 },
- { .start = 0x44f04, .end = 0x44f04 },
- { .start = 0x44fe8, .end = 0x44fe8 },
- { .start = 0x45008, .end = 0x45008 },
+ { .start = 0x44300 },
+ { .start = 0x44304 },
+ { .start = 0x44f00 },
+ { .start = 0x44f04 },
+ { .start = 0x44fe8 },
+ { .start = 0x45008 },
- { .start = 0x46070, .end = 0x46070 }, /* CDCLK_PLL_ENABLE */
- { .start = 0x46000, .end = 0x46000 }, /* CDCLK_CTL */
- { .start = 0x46008, .end = 0x46008 }, /* CDCLK_SQUASH_CTL */
+ { .start = 0x46070 }, /* CDCLK_PLL_ENABLE */
+ { .start = 0x46000 }, /* CDCLK_CTL */
+ { .start = 0x46008 }, /* CDCLK_SQUASH_CTL */
/* TRANS_CMTG_CTL_* */
- { .start = 0x6fa88, .end = 0x6fa88 },
- { .start = 0x6fb88, .end = 0x6fb88 },
-
- { .start = 0x46430, .end = 0x46430 }, /* CHICKEN_DCPR_1 */
- { .start = 0x46434, .end = 0x46434 }, /* CHICKEN_DCPR_2 */
- { .start = 0x454a0, .end = 0x454a0 }, /* CHICKEN_DCPR_4 */
- { .start = 0x42084, .end = 0x42084 }, /* CHICKEN_MISC_2 */
- { .start = 0x42088, .end = 0x42088 }, /* CHICKEN_MISC_3 */
- { .start = 0x46160, .end = 0x46160 }, /* CMTG_CLK_SEL */
+ { .start = 0x6fa88 },
+ { .start = 0x6fb88 },
+
+ { .start = 0x46430 }, /* CHICKEN_DCPR_1 */
+ { .start = 0x46434 }, /* CHICKEN_DCPR_2 */
+ { .start = 0x454a0 }, /* CHICKEN_DCPR_4 */
+ { .start = 0x42084 }, /* CHICKEN_MISC_2 */
+ { .start = 0x42088 }, /* CHICKEN_MISC_3 */
+ { .start = 0x46160 }, /* CMTG_CLK_SEL */
{ .start = 0x8f000, .end = 0x8ffff }, /* Main DMC registers */
{},
};
static struct intel_dmc_wl_range xe3lpd_dc3co_dmc_ranges[] = {
- { .start = 0x454a0, .end = 0x454a0 }, /* CHICKEN_DCPR_4 */
+ { .start = 0x454a0 }, /* CHICKEN_DCPR_4 */
- { .start = 0x45504, .end = 0x45504 }, /* DC_STATE_EN */
+ { .start = 0x45504 }, /* DC_STATE_EN */
/* DBUF_CTL_* */
- { .start = 0x44300, .end = 0x44300 },
- { .start = 0x44304, .end = 0x44304 },
- { .start = 0x44f00, .end = 0x44f00 },
- { .start = 0x44f04, .end = 0x44f04 },
- { .start = 0x44fe8, .end = 0x44fe8 },
- { .start = 0x45008, .end = 0x45008 },
-
- { .start = 0x46070, .end = 0x46070 }, /* CDCLK_PLL_ENABLE */
- { .start = 0x46000, .end = 0x46000 }, /* CDCLK_CTL */
- { .start = 0x46008, .end = 0x46008 }, /* CDCLK_SQUASH_CTL */
+ { .start = 0x44300 },
+ { .start = 0x44304 },
+ { .start = 0x44f00 },
+ { .start = 0x44f04 },
+ { .start = 0x44fe8 },
+ { .start = 0x45008 },
+
+ { .start = 0x46070 }, /* CDCLK_PLL_ENABLE */
+ { .start = 0x46000 }, /* CDCLK_CTL */
+ { .start = 0x46008 }, /* CDCLK_SQUASH_CTL */
{ .start = 0x8f000, .end = 0x8ffff }, /* Main DMC registers */
/* Scanline registers */
- { .start = 0x70000, .end = 0x70000 },
- { .start = 0x70004, .end = 0x70004 },
- { .start = 0x70014, .end = 0x70014 },
- { .start = 0x70018, .end = 0x70018 },
- { .start = 0x71000, .end = 0x71000 },
- { .start = 0x71004, .end = 0x71004 },
- { .start = 0x71014, .end = 0x71014 },
- { .start = 0x71018, .end = 0x71018 },
- { .start = 0x72000, .end = 0x72000 },
- { .start = 0x72004, .end = 0x72004 },
- { .start = 0x72014, .end = 0x72014 },
- { .start = 0x72018, .end = 0x72018 },
- { .start = 0x73000, .end = 0x73000 },
- { .start = 0x73004, .end = 0x73004 },
- { .start = 0x73014, .end = 0x73014 },
- { .start = 0x73018, .end = 0x73018 },
- { .start = 0x7b000, .end = 0x7b000 },
- { .start = 0x7b004, .end = 0x7b004 },
- { .start = 0x7b014, .end = 0x7b014 },
- { .start = 0x7b018, .end = 0x7b018 },
- { .start = 0x7c000, .end = 0x7c000 },
- { .start = 0x7c004, .end = 0x7c004 },
- { .start = 0x7c014, .end = 0x7c014 },
- { .start = 0x7c018, .end = 0x7c018 },
+ { .start = 0x70000 },
+ { .start = 0x70004 },
+ { .start = 0x70014 },
+ { .start = 0x70018 },
+ { .start = 0x71000 },
+ { .start = 0x71004 },
+ { .start = 0x71014 },
+ { .start = 0x71018 },
+ { .start = 0x72000 },
+ { .start = 0x72004 },
+ { .start = 0x72014 },
+ { .start = 0x72018 },
+ { .start = 0x73000 },
+ { .start = 0x73004 },
+ { .start = 0x73014 },
+ { .start = 0x73018 },
+ { .start = 0x7b000 },
+ { .start = 0x7b004 },
+ { .start = 0x7b014 },
+ { .start = 0x7b018 },
+ { .start = 0x7c000 },
+ { .start = 0x7c004 },
+ { .start = 0x7c014 },
+ { .start = 0x7c018 },
{},
};
@@ -187,7 +187,9 @@ static bool intel_dmc_wl_reg_in_range(i915_reg_t reg,
u32 offset = i915_mmio_reg_offset(reg);
for (int i = 0; ranges[i].start; i++) {
- if (ranges[i].start <= offset && offset <= ranges[i].end)
+ u32 end = ranges[i].end ?: ranges[i].start;
+
+ if (ranges[i].start <= offset && offset <= end)
return true;
}
--
2.47.0
next prev parent reply other threads:[~2024-11-07 18:30 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-07 18:27 [PATCH v3 00/18] drm/i915/dmc_wl: Fixes and enablement for Xe3_LPD Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 01/18] drm/i915/dmc_wl: Use i915_mmio_reg_offset() instead of reg.reg Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 02/18] drm/xe: Mimic i915 behavior for non-sleeping MMIO wait Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 03/18] drm/i915/dmc_wl: Use non-sleeping variant of " Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 04/18] drm/i915/dmc_wl: Check for non-zero refcount in release work Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 05/18] drm/i915/dmc_wl: Get wakelock when disabling dynamic DC states Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 06/18] drm/i915/dmc_wl: Use sentinel item for range tables Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 07/18] drm/i915/dmc_wl: Extract intel_dmc_wl_reg_in_range() Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 08/18] drm/i915/dmc_wl: Rename lnl_wl_range to powered_off_ranges Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 09/18] drm/i915/dmc_wl: Track registers touched by the DMC Gustavo Sousa
2024-11-07 18:27 ` Gustavo Sousa [this message]
2024-11-07 18:27 ` [PATCH v3 11/18] drm/i915/dmc_wl: Deal with existing references when disabling Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 12/18] drm/i915/dmc_wl: Couple enable/disable with dynamic DC states Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 13/18] drm/i915/dmc_wl: Add and use HAS_DMC_WAKELOCK() Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 14/18] drm/i915/dmc_wl: Init only after we have runtime device info Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 15/18] drm/i915/dmc_wl: Use HAS_DMC() in HAS_DMC_WAKELOCK() Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 16/18] drm/i915/dmc_wl: Sanitize enable_dmc_wl according to hardware support Gustavo Sousa
2024-11-07 18:27 ` [PATCH v3 17/18] drm/i915/dmc_wl: Do nothing until initialized Gustavo Sousa
2024-11-07 19:23 ` Luca Coelho
2024-11-07 20:14 ` Gustavo Sousa
2024-11-07 20:22 ` Gustavo Sousa
2024-11-08 9:57 ` Luca Coelho
2024-11-08 13:10 ` Gustavo Sousa
2024-11-07 20:47 ` Gustavo Sousa
2024-11-08 10:00 ` Luca Coelho
2024-11-07 18:27 ` [PATCH v3 18/18] drm/i915/xe3lpd: Use DMC wakelock by default Gustavo Sousa
2024-11-07 19:04 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/dmc_wl: Fixes and enablement for Xe3_LPD (rev3) Patchwork
2024-11-07 19:04 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-11-07 19:29 ` ✓ Fi.CI.BAT: success " Patchwork
2024-11-07 21:32 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107182921.102193-11-gustavo.sousa@intel.com \
--to=gustavo.sousa@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=luciano.coelho@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox