From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Subject: [PATCH v2 11/11] drm/i915/ddi: Sanitize DDI_BUF_CTL register definitions
Date: Fri, 14 Feb 2025 16:20:01 +0200 [thread overview]
Message-ID: <20250214142001.552916-12-imre.deak@intel.com> (raw)
In-Reply-To: <20250214142001.552916-1-imre.deak@intel.com>
Align the DDI_BUF_CTL register flag definitions with how this is done
elsewhere.
v2: Robustify macro calls with parens. (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 50efaab3b5536..3a936a4aa2e88 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3625,27 +3625,29 @@ enum skl_power_gate {
#define _DDI_BUF_CTL_B 0x64100
/* Known as DDI_CTL_DE in MTL+ */
#define DDI_BUF_CTL(port) _MMIO_PORT(port, _DDI_BUF_CTL_A, _DDI_BUF_CTL_B)
-#define DDI_BUF_CTL_ENABLE (1 << 31)
+#define DDI_BUF_CTL_ENABLE REG_BIT(31)
#define XE2LPD_DDI_BUF_D2D_LINK_ENABLE REG_BIT(29)
#define XE2LPD_DDI_BUF_D2D_LINK_STATE REG_BIT(28)
-#define DDI_BUF_TRANS_SELECT(n) ((n) << 24)
-#define DDI_BUF_EMP_MASK (0xf << 24)
-#define DDI_BUF_PHY_LINK_RATE(r) ((r) << 20)
+#define DDI_BUF_EMP_MASK REG_GENMASK(27, 24)
+#define DDI_BUF_TRANS_SELECT(n) REG_FIELD_PREP(DDI_BUF_EMP_MASK, (n))
+#define DDI_BUF_PHY_LINK_RATE_MASK REG_GENMASK(23, 20)
+#define DDI_BUF_PHY_LINK_RATE(r) REG_FIELD_PREP(DDI_BUF_PHY_LINK_RATE_MASK, (r))
#define DDI_BUF_PORT_DATA_MASK REG_GENMASK(19, 18)
#define DDI_BUF_PORT_DATA_10BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 0)
#define DDI_BUF_PORT_DATA_20BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 1)
#define DDI_BUF_PORT_DATA_40BIT REG_FIELD_PREP(DDI_BUF_PORT_DATA_MASK, 2)
-#define DDI_BUF_PORT_REVERSAL (1 << 16)
+#define DDI_BUF_PORT_REVERSAL REG_BIT(16)
#define DDI_BUF_LANE_STAGGER_DELAY_MASK REG_GENMASK(15, 8)
#define DDI_BUF_LANE_STAGGER_DELAY(symbols) REG_FIELD_PREP(DDI_BUF_LANE_STAGGER_DELAY_MASK, \
(symbols))
-#define DDI_BUF_IS_IDLE (1 << 7)
+#define DDI_BUF_IS_IDLE REG_BIT(7)
#define DDI_BUF_CTL_TC_PHY_OWNERSHIP REG_BIT(6)
-#define DDI_A_4_LANES (1 << 4)
-#define DDI_PORT_WIDTH(width) (((width) == 3 ? 4 : ((width) - 1)) << 1)
-#define DDI_PORT_WIDTH_MASK (7 << 1)
+#define DDI_A_4_LANES REG_BIT(4)
+#define DDI_PORT_WIDTH_MASK REG_GENMASK(3, 1)
+#define DDI_PORT_WIDTH(width) REG_FIELD_PREP(DDI_PORT_WIDTH_MASK, \
+ ((width) == 3 ? 4 : (width) - 1))
#define DDI_PORT_WIDTH_SHIFT 1
-#define DDI_INIT_DISPLAY_DETECTED (1 << 0)
+#define DDI_INIT_DISPLAY_DETECTED REG_BIT(0)
/* DDI Buffer Translations */
#define _DDI_BUF_TRANS_A 0x64E00
--
2.44.2
next prev parent reply other threads:[~2025-02-14 14:19 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-14 14:19 [PATCH v2 00/11] drm/i915/ddi: Fix/simplify port enabling/disabling Imre Deak
2025-02-14 14:19 ` [PATCH v2 01/11] drm/i915/dsi: Use TRANS_DDI_FUNC_CTL's own port width macro Imre Deak
2025-02-14 14:19 ` [PATCH v2 02/11] drm/i915/ddi: Fix HDMI port width programming in DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` [PATCH v2 03/11] drm/i915/ddi: Make all the PORT_WIDTH macros work the same way Imre Deak
2025-02-14 14:19 ` [PATCH v2 04/11] drm/i915/ddi: Set missing TC DP PHY lane stagger delay in DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` [PATCH v2 05/11] drm/i915/ddi: Simplify the port enabling via DDI_BUF_CTL Imre Deak
2025-02-14 14:19 ` [PATCH v2 06/11] drm/i915/ddi: Simplify the port disabling " Imre Deak
2025-02-14 14:19 ` [PATCH v2 07/11] drm/i915/ddi: Simplify waiting for a port to get active/idle " Imre Deak
2025-02-14 14:19 ` [PATCH v2 08/11] drm/i915/ddi: Move platform checks within mtl_ddi_enable/disable_d2d_link() Imre Deak
2025-02-14 14:19 ` [PATCH v2 09/11] drm/i915/ddi: Unify the platform specific functions disabling a port Imre Deak
2025-02-14 14:20 ` [PATCH v2 10/11] drm/i915/ddi: Add a helper to enable " Imre Deak
2025-02-14 14:20 ` Imre Deak [this message]
2025-02-14 15:14 ` ✗ Fi.CI.CHECKPATCH: warning for drm/i915/ddi: Fix/simplify port enabling/disabling (rev2) Patchwork
2025-02-14 15:14 ` ✗ Fi.CI.SPARSE: " Patchwork
2025-02-14 15:33 ` ✓ i915.CI.BAT: success " Patchwork
2025-02-14 15:37 ` [PATCH v2 00/11] drm/i915/ddi: Fix/simplify port enabling/disabling Jani Nikula
2025-02-14 17:18 ` ✗ i915.CI.Full: failure for drm/i915/ddi: Fix/simplify port enabling/disabling (rev2) Patchwork
2025-02-14 20:15 ` Imre Deak
2025-02-14 20:22 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250214142001.552916-12-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox