[PATCH v7 31/31] docs/dyndbg: add classmap info to howto

[Jim Cromie <jim.cromie@gmail.com>]

Describe the 3 API macros providing dynamic_debug's classmaps

DYNAMIC_DEBUG_CLASSMAP_DEFINE - create & export a classmap
DYNAMIC_DEBUG_CLASSMAP_USE    - refer to exported map
DYNAMIC_DEBUG_CLASSMAP_PARAM  - bind control param to the classmap
DYNAMIC_DEBUG_CLASSMAP_PARAM_REF + use module's storage - __drm_debug

NB: The _DEFINE & _USE model makes the user dependent on the definer,
just like EXPORT_SYMBOL(__drm_debug) already does.

cc: linux-doc@vger.kernel.org
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
 .../admin-guide/dynamic-debug-howto.rst       | 135 ++++++++++++++++--
 1 file changed, 123 insertions(+), 12 deletions(-)

diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index 89ee15d7ae58..c85266ee8eed 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -146,6 +146,9 @@ keywords are::
   "1-30" is valid range but "1 - 30" is not.
 
 
+Keywords
+--------
+
 The meanings of each keyword are:
 
 func
@@ -194,16 +197,6 @@ format
 	format "nfsd: SETATTR"  // a neater way to match a format with whitespace
 	format 'nfsd: SETATTR'  // yet another way to match a format with whitespace
 
-class
-    The given class_name is validated against each module, which may
-    have declared a list of known class_names.  If the class_name is
-    found for a module, callsite & class matching and adjustment
-    proceeds.  Examples::
-
-	class DRM_UT_KMS	# a DRM.debug category
-	class JUNK		# silent non-match
-	// class TLD_*		# NOTICE: no wildcard in class names
-
 line
     The given line number or range of line numbers is compared
     against the line number of each ``pr_debug()`` callsite.  A single
@@ -218,6 +211,25 @@ line
 	line -1605          // the 1605 lines from line 1 to line 1605
 	line 1600-          // all lines from line 1600 to the end of the file
 
+class
+
+    The given class_name is validated against each module, which may
+    have declared a list of class_names it accepts.  If the class_name
+    accepted by a module, callsite & class matching and adjustment
+    proceeds.  Examples::
+
+	class DRM_UT_KMS	# a drm.debug category
+	class JUNK		# silent non-match
+	// class TLD_*		# NOTICE: no wildcard in class names
+
+.. note::
+
+    Unlike other keywords, classes are "name-to-change", not
+    "omitting-constraint-allows-change".  See Dynamic Debug Classmaps
+
+Flags
+-----
+
 The flags specification comprises a change operation followed
 by one or more flag characters.  The change operation is one
 of the characters::
@@ -238,11 +250,15 @@ The flags are::
   s    Include the source file name
   l    Include line number
 
+.. note::
+
+   * To query without changing	``+_`` or ``-_``.
+   * To clear all flags		``=_`` or ``-fslmpt``.
+
 For ``print_hex_dump_debug()`` and ``print_hex_dump_bytes()``, only
 the ``p`` flag has meaning, other flags are ignored.
 
-Note the regexp ``^[-+=][fslmpt_]+$`` matches a flags specification.
-To clear all flags at once, use ``=_`` or ``-fslmpt``.
+The regexp ``^[-+=][fslmpt_]+$`` matches a flags specification.
 
 
 Debug messages during Boot Process
@@ -394,3 +410,98 @@ just a shortcut for ``print_hex_dump(KERN_DEBUG)``.
 For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is
 its ``prefix_str`` argument, if it is constant string; or ``hexdump``
 in case ``prefix_str`` is built dynamically.
+
+.. _dyndbg-classmaps:
+
+Dynamic Debug Classmaps
+=======================
+
+The "class" keyword selects prdbgs based on author supplied,
+domain-oriented names.  This complements the nested-scope keywords:
+module, file, function, line.
+
+The main difference from the others: classes must be named to be
+changed.  This protects them from unintended overwrite::
+
+  # IOW this cannot undo any drm.debug settings
+  :#> ddcmd -p
+
+This protection is needed; /sys/module/drm/parameters/debug is ABI.
+drm.debug is authoritative when dyndbg is not used, dyndbg-under-DRM
+is an implementation detail, and must not behave erratically, just
+because another admin fed >control something unrelated.
+
+So each class must be enabled individually (no wildcards)::
+
+  :#> ddcmd class DRM_UT_CORE +p
+  :#> ddcmd class DRM_UT_KMS +p
+  # or more selectively
+  :#> ddcmd class DRM_UT_CORE module drm +p
+
+That makes direct >control wordy and annoying, but it is a secondary
+interface; it is not intended to replace the ABI, just slide in
+underneath and reimplement the guaranteed behavior.  So DRM would keep
+using the convenient way, and be able to trust it::
+
+  :#> echo 0x1ff > /sys/module/drm/parameters/debug
+
+That said, since the sysfs/kparam is the ABI, if the author omits the
+CLASSMAP_PARAM, theres no ABI to guard, and he probably wants a less
+pedantic >control interface.  In this case, protection is dropped.
+
+Dynamic Debug Classmap API
+==========================
+
+DYNAMIC_DEBUG_CLASSMAP_DEFINE(clname,type,_base,classnames) - this maps
+classnames (a list of strings) onto class-ids consecutively, starting
+at _base.
+
+DYNAMIC_DEBUG_CLASSMAP_USE(clname) & _USE_(clname,_base) - modules
+call this to refer to the var _DEFINEd elsewhere (and exported).
+
+DYNAMIC_DEBUG_CLASSMAP_PARAM(clname) - creates the sysfs/kparam,
+maps/exposes bits 0..N as class-names.
+
+Classmaps are opt-in: modules invoke _DEFINE or _USE to authorize
+dyndbg to update those named classes.  "class FOO" queries are
+validated against the classes defined or used by the module, this
+finds the classid to alter; classes are not directly selectable by
+their classid.
+
+Classnames are global in scope, so subsystems (module-groups) should
+prepend a subsystem name; unqualified names like "CORE" are discouraged.
+
+NB: It is an inherent API limitation (due to class_id's int type) that
+the following are possible:
+
+  // these errors should be caught in review
+  __pr_debug_cls(0, "fake DRM_UT_CORE msg");  // this works
+  __pr_debug_cls(62, "un-known classid msg"); // this compiles, does nothing
+
+There are 2 types of classmaps:
+
+* DD_CLASS_TYPE_DISJOINT_BITS: classes are independent, like drm.debug
+* DD_CLASS_TYPE_LEVEL_NUM: classes are relative, ordered (V3 > V2)
+
+DYNAMIC_DEBUG_CLASSMAP_PARAM - modelled after module_param_cb, it
+refers to a DEFINEd classmap, and associates it to the param's
+data-store.  This state is then applied to DEFINEr and USEr modules
+when they're modprobed.
+
+The PARAM interface also enforces the DD_CLASS_TYPE_LEVEL_NUM relation
+amongst the contained classnames; all classes are independent in the
+control parser itself.  There is no implied meaning in names like "V4"
+or "PL_ERROR" vs "PL_WARNING".
+
+Modules or subsystems (drm & drivers) can define multiple classmaps,
+as long as they (all the classmaps) share the limited 0..62
+per-module-group _class_id range, without overlap.
+
+If a module encounters a conflict between 2 classmaps it is _USEing or
+_DEFINEing, it can invoke the extended _USE_(name,_base) macro to
+de-conflict the respective ranges.
+
+``#define DEBUG`` will enable all pr_debugs in scope, including any
+class'd ones.  This won't be reflected in the PARAM readback value,
+but the class'd pr_debug callsites can be forced off by toggling the
+classmap-kparam all-on then all-off.
-- 
2.52.0