Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: jani.nikula@linux.intel.com, imre.deak@intel.com,
	Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Subject: [PATCH 09/17] drm/i915/dp_mst: Extract helper to compute link for given joiner config
Date: Mon,  2 Feb 2026 16:07:23 +0530	[thread overview]
Message-ID: <20260202103731.357416-10-ankit.k.nautiyal@intel.com> (raw)
In-Reply-To: <20260202103731.357416-1-ankit.k.nautiyal@intel.com>

Move the joiner-dependent portion of mst_stream_compute_config() into
mst_stream_compute_link_for_joined_pipes(), which computes the MST link
configuration for a specific num_joined_pipes.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 73 ++++++++++++++-------
 1 file changed, 48 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 5209cc1843ba..9c6b27f35114 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -595,40 +595,19 @@ mst_stream_compute_config_limits(struct intel_dp *intel_dp,
 							    dsc);
 }
 
-static int mst_stream_compute_config(struct intel_encoder *encoder,
-				     struct intel_crtc_state *pipe_config,
-				     struct drm_connector_state *conn_state)
+static int mst_stream_compute_link_for_joined_pipes(struct intel_encoder *encoder,
+						    struct intel_crtc_state *pipe_config,
+						    struct drm_connector_state *conn_state,
+						    int num_joined_pipes)
 {
 	struct intel_display *display = to_intel_display(encoder);
-	struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state);
-	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
 	struct intel_dp *intel_dp = to_primary_dp(encoder);
 	struct intel_connector *connector =
 		to_intel_connector(conn_state->connector);
-	const struct drm_display_mode *adjusted_mode =
-		&pipe_config->hw.adjusted_mode;
 	struct link_config_limits limits;
 	bool dsc_needed, joiner_needs_dsc;
-	int num_joined_pipes;
 	int ret = 0;
 
-	if (pipe_config->fec_enable &&
-	    !intel_dp_supports_fec(intel_dp, connector, pipe_config))
-		return -EINVAL;
-
-	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
-		return -EINVAL;
-
-	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
-	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
-	pipe_config->has_pch_encoder = false;
-
-	num_joined_pipes = intel_dp_num_joined_pipes(intel_dp, connector,
-						     adjusted_mode->crtc_hdisplay,
-						     adjusted_mode->crtc_clock);
-	if (num_joined_pipes > 1)
-		pipe_config->joiner_pipes = GENMASK(crtc->pipe + num_joined_pipes - 1, crtc->pipe);
-
 	joiner_needs_dsc = intel_dp_joiner_needs_dsc(display, num_joined_pipes);
 
 	dsc_needed = joiner_needs_dsc || intel_dp->force_dsc_en ||
@@ -683,6 +662,8 @@ static int mst_stream_compute_config(struct intel_encoder *encoder,
 		ret = intel_dp_dsc_compute_config(intel_dp, pipe_config,
 						  conn_state, &limits,
 						  pipe_config->dp_m_n.tu);
+		if (ret)
+			return ret;
 	}
 
 	if (ret)
@@ -692,6 +673,48 @@ static int mst_stream_compute_config(struct intel_encoder *encoder,
 	if (ret)
 		return ret;
 
+	return 0;
+}
+
+static int mst_stream_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_state *pipe_config,
+				     struct drm_connector_state *conn_state)
+{
+	struct intel_display *display = to_intel_display(encoder);
+	struct intel_atomic_state *state = to_intel_atomic_state(conn_state->state);
+	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
+	struct intel_dp *intel_dp = to_primary_dp(encoder);
+	struct intel_connector *connector =
+		to_intel_connector(conn_state->connector);
+	const struct drm_display_mode *adjusted_mode =
+		&pipe_config->hw.adjusted_mode;
+	int num_joined_pipes;
+	int ret = 0;
+
+	if (pipe_config->fec_enable &&
+	    !intel_dp_supports_fec(intel_dp, connector, pipe_config))
+		return -EINVAL;
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return -EINVAL;
+
+	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
+	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
+	pipe_config->has_pch_encoder = false;
+
+	num_joined_pipes = intel_dp_num_joined_pipes(intel_dp, connector,
+						     adjusted_mode->crtc_hdisplay,
+						     adjusted_mode->crtc_clock);
+	if (num_joined_pipes > 1)
+		pipe_config->joiner_pipes = GENMASK(crtc->pipe + num_joined_pipes - 1, crtc->pipe);
+
+	ret = mst_stream_compute_link_for_joined_pipes(encoder,
+						       pipe_config,
+						       conn_state,
+						       num_joined_pipes);
+	if (ret)
+		return ret;
+
 	pipe_config->limited_color_range =
 		intel_dp_limited_color_range(pipe_config, conn_state);
 
-- 
2.45.2


  parent reply	other threads:[~2026-02-02 10:53 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-02 10:37 [PATCH 00/17] Account for DSC bubble overhead for horizontal slices Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 01/17] drm/i915/dp: Early reject bad hdisplay in intel_dp_mode_valid Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 02/17] drm/i915/dp: Move num_joined_pipes and related checks together Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 03/17] drm/i915/dp: Extract helper to get the hdisplay limit Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 04/17] drm/i915/dp: Rework pipe joiner logic in mode_valid Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 05/17] drm/i915/dp: Rework pipe joiner logic in compute_config Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 06/17] drm/i915/dp_mst: Move the check for dotclock at the end Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 07/17] drm/i915/dp_mst: Move the joiner dependent code together Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 08/17] drm/i915/dp_mst: Rework pipe joiner logic in mode_valid Ankit Nautiyal
2026-02-02 10:37 ` Ankit Nautiyal [this message]
2026-02-02 10:37 ` [PATCH 10/17] drm/i915/dp_mst: Rework pipe joiner logic in compute_config Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 11/17] drm/i915/dp: Remove unused joiner helpers Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 12/17] drm/i915/dp: Introduce helper to check pixel rate against dotclock limits Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 13/17] drm/i915/dp: Refactor dsc_slice_count handling in intel_dp_mode_valid() Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 14/17] drm/i915/dp: Account for DSC slice overhead Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 15/17] drm/i915/dp: Add helpers for joiner candidate loops Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 16/17] drm/i915/display: Add upper limit check for pixel clock Ankit Nautiyal
2026-02-02 10:37 ` [PATCH 17/17] drm/i915/display: Extend the max dotclock limit to WCL Ankit Nautiyal
2026-02-02 20:56 ` ✓ i915.CI.BAT: success for Account for DSC bubble overhead for horizontal slices (rev7) Patchwork
2026-02-03  2:34 ` ✗ i915.CI.Full: failure " Patchwork
2026-02-03  8:03 ` ✓ i915.CI.Full: success " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2026-01-30  8:17 [PATCH 00/17] Account for DSC bubble overhead for horizontal slices Ankit Nautiyal
2026-01-30  8:18 ` [PATCH 09/17] drm/i915/dp_mst: Extract helper to compute link for given joiner config Ankit Nautiyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260202103731.357416-10-ankit.k.nautiyal@intel.com \
    --to=ankit.k.nautiyal@intel.com \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox