From: Uma Shankar <uma.shankar@intel.com>
To: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org
Cc: dibin.moolakadan.subrahmanian@intel.com,
Uma Shankar <uma.shankar@intel.com>
Subject: [v4 3/4] drm/i915/display: Reprogram AS SDP skip frames on seamless VRR transitions
Date: Tue, 1 Sep 2026 03:04:20 +0530 [thread overview]
Message-ID: <20260831213421.1804635-4-uma.shankar@intel.com> (raw)
In-Reply-To: <20260831213421.1804635-1-uma.shankar@intel.com>
The AS SDP skip-frame count is written to PR_ALPM_CTL only from
lnl_alpm_configure(), which runs from intel_psr_enable_locked() on a
Panel Replay disabled->enabled transition. VRR, however, can be enabled
and disabled seamlessly - without a modeset and without cycling Panel
Replay (intel_crtc_vrr_enabling()/disabling() in the pipe update path).
As a result, when a panel comes up with VRR off the non-zero skip count
is programmed, and when VRR is later turned on seamlessly PR stays
enabled, lnl_alpm_configure() is not re-invoked, and the stale skip
count is left in the register. This also leaves the coupled AS SDP
transmission / DC3CO idle-protocol bits inconsistent with the DC3co
state, which is recomputed on every commit.
Factor the PR_ALPM_CTL AS SDP programming out of lnl_alpm_configure()
into intel_alpm_configure_pr_as_sdp() and expose
intel_alpm_pr_as_sdp_update(), which recomputes those fields for the
current VRR state. Call it from the seamless VRR enable and disable
sites (non-modeset only; a modeset re-runs PR enable anyway) so the skip
counter always matches whether VRR is actively driving the refresh rate.
v2: Fixed Sashiko review comments
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
---
drivers/gpu/drm/i915/display/intel_alpm.c | 119 +++++++++++++------
drivers/gpu/drm/i915/display/intel_alpm.h | 1 +
drivers/gpu/drm/i915/display/intel_display.c | 18 +++
3 files changed, 100 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c
index 0a33a89975bc..c784e77f610b 100644
--- a/drivers/gpu/drm/i915/display/intel_alpm.c
+++ b/drivers/gpu/drm/i915/display/intel_alpm.c
@@ -427,6 +427,85 @@ bool intel_alpm_pr_as_sdp_skip_frames_enabled(struct intel_dp *intel_dp,
return intel_pr_as_sdp_skip_frames(intel_dp) > 0;
}
+/*
+ * Program the AS SDP portion of PR_ALPM_CTL: the transmission position, the
+ * skip-frame counter and the coupled AS SDP transmission / DC3CO idle-protocol
+ * bits. This is a full recompute of those fields (the base value is built from
+ * scratch, not read back), so it can be called both at PR enable time and when
+ * VRR is toggled seamlessly - which changes whether periodic AS SDP is used.
+ *
+ * Caller must hold intel_dp->alpm.lock.
+ */
+static void intel_alpm_configure_pr_as_sdp(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
+{
+ struct intel_display *display = to_intel_display(intel_dp);
+ enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
+ u32 pr_alpm_ctl = get_pr_alpm_as_sdp_transmission_time(crtc_state);
+ u32 skip_frames = 0;
+
+ if (intel_alpm_pr_as_sdp_skip_frames_enabled(intel_dp, crtc_state))
+ skip_frames = intel_pr_as_sdp_skip_frames(intel_dp);
+
+ if (crtc_state->link_off_after_as_sdp_when_pr_active)
+ pr_alpm_ctl |= PR_ALPM_CTL_ALLOW_LINK_OFF_BETWEEN_AS_SDP_AND_SU;
+
+ /*
+ * Skip frames needs the AS SDP to keep flowing during PR active, so it
+ * is mutually exclusive with disabling AS SDP transmission in active and
+ * with the DC3CO idle protocol.
+ */
+ if (skip_frames) {
+ pr_alpm_ctl |= PR_ALPM_CTL_AS_SDP_SKIP_FRAMES(skip_frames);
+ pr_alpm_ctl &= ~PR_ALPM_CTL_AS_SDP_TRANSMISSION_IN_ACTIVE_DISABLE;
+ pr_alpm_ctl &= ~PR_ALPM_CTL_USE_DC3CO_IDLE_PROTOCOL;
+ } else {
+ pr_alpm_ctl &= ~PR_ALPM_CTL_AS_SDP_SKIP_FRAMES_MASK;
+
+ if (crtc_state->disable_as_sdp_when_pr_active)
+ pr_alpm_ctl |= PR_ALPM_CTL_AS_SDP_TRANSMISSION_IN_ACTIVE_DISABLE;
+
+ if (intel_display_power_dc3co_allowed(display))
+ pr_alpm_ctl |= PR_ALPM_CTL_USE_DC3CO_IDLE_PROTOCOL;
+ }
+
+ intel_de_write(display, PR_ALPM_CTL(display, cpu_transcoder), pr_alpm_ctl);
+}
+
+/*
+ * VRR can be enabled or disabled seamlessly, i.e. without a modeset and without
+ * cycling Panel Replay, so the AS SDP skip-frame programming done at PR enable
+ * time would otherwise go stale across a VRR toggle. Reprogram it here so the
+ * skip counter (and the coupled bits) matches the new VRR state.
+ */
+void intel_alpm_pr_as_sdp_update(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_display *display = to_intel_display(crtc_state);
+ struct intel_encoder *encoder;
+
+ /* AS SDP skip frames field only exists on Xe3p_LPD+ */
+ if (DISPLAY_VER(display) < 35)
+ return;
+
+ for_each_intel_encoder_mask(display->drm, encoder,
+ crtc_state->uapi.encoder_mask) {
+ struct intel_dp *intel_dp;
+
+ if (!intel_encoder_is_dp(encoder))
+ continue;
+
+ intel_dp = enc_to_intel_dp(encoder);
+
+ if (!intel_dp->as_sdp_supported ||
+ !intel_alpm_is_alpm_aux_less(intel_dp, crtc_state))
+ continue;
+
+ mutex_lock(&intel_dp->alpm.lock);
+ intel_alpm_configure_pr_as_sdp(intel_dp, crtc_state);
+ mutex_unlock(&intel_dp->alpm.lock);
+ }
+}
+
static void lnl_alpm_configure(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
@@ -449,44 +528,8 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp,
ALPM_CTL_AUX_LESS_SLEEP_HOLD_TIME_50_SYMBOLS |
ALPM_CTL_AUX_LESS_WAKE_TIME(crtc_state->alpm_state.aux_less_wake_lines);
- if (intel_dp->as_sdp_supported) {
- u32 pr_alpm_ctl = get_pr_alpm_as_sdp_transmission_time(crtc_state);
- u32 skip_frames = 0;
-
- /*
- * AS SDP skip frames field only exists on Xe3p_LPD+, and
- * periodic AS SDP is a Panel Replay feature that is only
- * used when VRR is not actively driving the refresh rate.
- */
- if (DISPLAY_VER(display) >= 35 && crtc_state->has_panel_replay &&
- !crtc_state->vrr.enable)
- skip_frames = intel_pr_as_sdp_skip_frames(intel_dp);
-
- if (crtc_state->link_off_after_as_sdp_when_pr_active)
- pr_alpm_ctl |= PR_ALPM_CTL_ALLOW_LINK_OFF_BETWEEN_AS_SDP_AND_SU;
-
- /*
- * Skip frames needs the AS SDP to keep flowing during PR
- * active, so it is mutually exclusive with disabling AS SDP
- * transmission in active and with the DC3CO idle protocol.
- */
- if (skip_frames) {
- pr_alpm_ctl |= PR_ALPM_CTL_AS_SDP_SKIP_FRAMES(skip_frames);
- pr_alpm_ctl &= ~PR_ALPM_CTL_AS_SDP_TRANSMISSION_IN_ACTIVE_DISABLE;
- pr_alpm_ctl &= ~PR_ALPM_CTL_USE_DC3CO_IDLE_PROTOCOL;
- } else {
- pr_alpm_ctl &= ~PR_ALPM_CTL_AS_SDP_SKIP_FRAMES_MASK;
-
- if (crtc_state->disable_as_sdp_when_pr_active)
- pr_alpm_ctl |= PR_ALPM_CTL_AS_SDP_TRANSMISSION_IN_ACTIVE_DISABLE;
-
- if (intel_display_power_dc3co_allowed(display))
- pr_alpm_ctl |= PR_ALPM_CTL_USE_DC3CO_IDLE_PROTOCOL;
- }
-
- intel_de_write(display, PR_ALPM_CTL(display, cpu_transcoder),
- pr_alpm_ctl);
- }
+ if (intel_dp->as_sdp_supported)
+ intel_alpm_configure_pr_as_sdp(intel_dp, crtc_state);
} else {
alpm_ctl = ALPM_CTL_EXTENDED_FAST_WAKE_ENABLE |
diff --git a/drivers/gpu/drm/i915/display/intel_alpm.h b/drivers/gpu/drm/i915/display/intel_alpm.h
index 328920027f1c..f8f605d94f96 100644
--- a/drivers/gpu/drm/i915/display/intel_alpm.h
+++ b/drivers/gpu/drm/i915/display/intel_alpm.h
@@ -36,6 +36,7 @@ bool intel_alpm_is_alpm_aux_less(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state);
bool intel_alpm_pr_as_sdp_skip_frames_enabled(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state);
+void intel_alpm_pr_as_sdp_update(const struct intel_crtc_state *crtc_state);
void intel_alpm_disable(struct intel_dp *intel_dp);
bool intel_alpm_get_error(struct intel_dp *intel_dp);
void intel_alpm_lobf_compute_config_late(struct intel_dp *intel_dp,
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index fc30a455bed3..9151ea6c15ab 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -1232,6 +1232,14 @@ static void intel_pre_plane_update(struct intel_atomic_state *state,
intel_vrr_disable(old_crtc_state);
intel_vrr_dcb_reset(old_crtc_state, crtc);
intel_crtc_update_active_timings(old_crtc_state, false);
+
+ /*
+ * VRR is being disabled seamlessly (no modeset, Panel Replay
+ * stays enabled), so re-apply the AS SDP skip-frame programming
+ * for the new (VRR off) state.
+ */
+ if (!intel_crtc_needs_modeset(new_crtc_state))
+ intel_alpm_pr_as_sdp_update(new_crtc_state);
}
if (audio_disabling(old_crtc_state, new_crtc_state))
@@ -6971,6 +6979,16 @@ static void intel_update_crtc(struct intel_atomic_state *state,
intel_crtc_update_active_timings(new_crtc_state,
new_crtc_state->vrr.enable);
+ /*
+ * VRR is being enabled seamlessly (no modeset, Panel Replay stays
+ * enabled), so re-apply the AS SDP skip-frame programming for the new
+ * (VRR on) state. Done here, outside the vblank-evasion critical section
+ * (which runs with interrupts disabled), because it takes alpm.lock.
+ */
+ if (intel_crtc_vrr_enabling(state, crtc) &&
+ !intel_crtc_needs_modeset(new_crtc_state))
+ intel_alpm_pr_as_sdp_update(new_crtc_state);
+
if (new_crtc_state->vrr.dc_balance.enable)
intel_vrr_dcb_increment_flip_count(new_crtc_state, crtc);
--
2.50.1
next prev parent reply other threads:[~2026-08-31 21:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-31 21:34 [v4 0/4] drm/i915/display: Enable AS SDP Skip Frames Uma Shankar
2026-08-31 21:34 ` [v4 1/4] drm/i915/display: Enable periodic AS SDP skip frames Uma Shankar
2026-09-02 16:15 ` Dibin Moolakadan Subrahmanian
2026-09-03 6:13 ` Naladala, Ramanaidu
2026-08-31 21:34 ` [v4 2/4] drm/i915/display: Force disable DC3co when AS SDP skip frames is enabled Uma Shankar
2026-09-02 16:29 ` Dibin Moolakadan Subrahmanian
2026-09-03 6:18 ` Naladala, Ramanaidu
2026-08-31 21:34 ` Uma Shankar [this message]
2026-09-02 16:44 ` [v4 3/4] drm/i915/display: Reprogram AS SDP skip frames on seamless VRR transitions Dibin Moolakadan Subrahmanian
2026-09-03 6:21 ` Naladala, Ramanaidu
2026-09-03 6:36 ` Naladala, Ramanaidu
2026-08-31 21:34 ` [v4 4/4] drm/i915/display: Gate periodic AS SDP skip frames behind a module parameter Uma Shankar
2026-08-31 22:28 ` sashiko-bot
2026-09-02 18:00 ` Dibin Moolakadan Subrahmanian
2026-09-03 6:37 ` Naladala, Ramanaidu
2026-09-01 14:03 ` ✓ i915.CI.BAT: success for drm/i915/display: Enable AS SDP Skip Frames (rev4) Patchwork
2026-09-01 18:02 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260831213421.1804635-4-uma.shankar@intel.com \
--to=uma.shankar@intel.com \
--cc=dibin.moolakadan.subrahmanian@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox