Re: [Intel-gfx] [PATCH v2 1/7] drm/i915/pxp: Make gt and pxp init/fini aware of PXP-owning-GT

["Teres Alexis, Alan Previn" <alan.previn.teres.alexis@intel.com>]

On Mon, 2022-10-17 at 10:03 -0700, Alan Previn Teres Alexis wrote:
> 
> On Thu, 2022-10-13 at 13:48 -0700, Ceraolo Spurio, Daniele wrote:
> > 
> > On 10/5/2022 9:38 PM, Alan Previn wrote:
> > > In preparation for future MTL-PXP feature support, PXP control
> > > context should only valid on the correct gt tile. Depending on the
> > > device-info this mat not necessarily be the root GT tile and
> > > depends on which tile owns the VEBOX and KCR.
> > > 
> Alan:[snip]
> > > diff --git a/drivers/gpu/drm/i915/gt/intel_gt.c b/drivers/gpu/drm/i915/gt/intel_gt.c
> > > index b367cfff48d5..e61f6c5ed440 100644
> > > --- a/drivers/gpu/drm/i915/gt/intel_gt.c
> > > +++ b/drivers/gpu/drm/i915/gt/intel_gt.c
> > > @@ -850,6 +850,10 @@ int intel_gt_probe_all(struct drm_i915_private *i915)
> > >   	gt->name = "Primary GT";
> > >   	gt->info.engine_mask = RUNTIME_INFO(i915)->platform_engine_mask;
> > >   
> > > +	/* device config determines which GT owns the global pxp-tee context */
> > > +	if (VDBOX_MASK(gt) && !INTEL_INFO(i915)->has_nonroot_pxpgt)
> > > +		gt->pxptee_iface_owner = true;
> > > +
> > 
> > I'm not convinced that we need dedicated has_nonroot_pxpgt and 
> > pxptee_iface_owner flags. MTL moves the GSC inside a GT and the owner of 
> > PXP is the GT where the GSC engine resides. So we could have a checker like:
> > 
> > bool intel_pxp_supported(struct intel_gt *gt)
> > {
> >          /* we only support HECI PXP from the root GT */
> >          if (HAS_HECI_PXP(gt->i915))
> >                  return gt_is_root(gt);
> > 
> >          return HAS_ENGINE(gt, GSC);
> > }
> > 
> > I'm aware that the GSC engine code is still not available, but we can 
> > special case for MTL for now and then replace it when the GSC code lands:
> > 
> > bool intel_pxp_supported(struct intel_gt *gt)
> > {
> >          /* we only support HECI PXP from the root GT */
> >          if (HAS_HECI_PXP(gt->i915))
> >                  return gt_is_root(gt);
> > 
> >          /* TODO: replace with GSC check */
> >          return IS_METEORLAKE(gt->i915) && !gt_is_root(gt);
> > }
> > 
> > Then we can use intel_pxp_supported(gt) instead of 
> > gt->pxptee_iface_owner and we can drop has_nonroot_pxpgt. Might also be 
> > worth merging this with HAS_PXP for a unified check, but that can come 
> > later.
> > 
> > Daniele
> 
> As per offline conversations, we know above combination may not work for the DG2 case, but i'll go ahead and re-rev this
> after i look for another way to avoid creating another device info variable- i'll try to get a karnaugh map going to
> ensure we have a good combination of existing device-config info that are reliable for all current and MTL usages else
> we may need a new device-config after all (maybe a better named one if needed).

Alan: Looks like the original intel_pxp_init (with only the change to HAS_PXP to take in gt as input) might be
sufficient for all cases we have with today's hw - without the need for the pxptee_iface_owner or has_nonroot_pxpgt:

	* for HW without PXP/GSC-HuC-Authent: will fail on either HAS_PXP and _gt_needs_teelink
	* for adl/tgl: HAS_PXP will PASS
	* for dg2: HAS_PXP will fail, but _gt_needs_teelink will pass
	* for mtl: HAS_PXP will pass for 2nd tile only due to VDBOX mask

...alan