Intel-GFX Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 3/3] drm/i915/gt: Stop invalidating the PD cachelines for gen7
Date: Thu, 06 Feb 2020 18:32:22 +0200	[thread overview]
Message-ID: <87d0arad7t.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <20200206014439.2137800-3-chris@chris-wilson.co.uk>

Chris Wilson <chris@chris-wilson.co.uk> writes:

> Trust that the HW does the right thing after simply updating the
> PD_DIR_BASE?

Bspec offers an invalidate before writing the base.

So, lets assume the DCLV write is superfluous as it will be
the same.

Then the sequence would be TLB_INVLIDATE followed by
PP_DIR_BASE (which will all pds)

-Mika

>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/gt/intel_ring_submission.c | 10 +---------
>  1 file changed, 1 insertion(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/intel_ring_submission.c b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> index f915a63e1110..23f4fc2669d1 100644
> --- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> +++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> @@ -1341,14 +1341,10 @@ static int load_pd_dir(struct i915_request *rq,
>  	const struct intel_engine_cs * const engine = rq->engine;
>  	u32 *cs;
>  
> -	cs = intel_ring_begin(rq, 12);
> +	cs = intel_ring_begin(rq, 6);
>  	if (IS_ERR(cs))
>  		return PTR_ERR(cs);
>  
> -	*cs++ = MI_LOAD_REGISTER_IMM(1);
> -	*cs++ = i915_mmio_reg_offset(RING_PP_DIR_DCLV(engine->mmio_base));
> -	*cs++ = valid;
> -
>  	*cs++ = MI_LOAD_REGISTER_IMM(1);
>  	*cs++ = i915_mmio_reg_offset(RING_PP_DIR_BASE(engine->mmio_base));
>  	*cs++ = px_base(ppgtt->pd)->ggtt_offset << 10;
> @@ -1359,10 +1355,6 @@ static int load_pd_dir(struct i915_request *rq,
>  	*cs++ = intel_gt_scratch_offset(engine->gt,
>  					INTEL_GT_SCRATCH_FIELD_DEFAULT);
>  
> -	*cs++ = MI_LOAD_REGISTER_IMM(1);
> -	*cs++ = i915_mmio_reg_offset(RING_INSTPM(engine->mmio_base));
> -	*cs++ = _MASKED_BIT_ENABLE(INSTPM_TLB_INVALIDATE);
> -
>  	intel_ring_advance(rq, cs);
>  
>  	return rq->engine->emit_flush(rq, EMIT_FLUSH);
> -- 
> 2.25.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-02-06 16:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-06  1:44 [Intel-gfx] [PATCH 1/3] drm/i915/gt: Tweak gen7 xcs flushing Chris Wilson
2020-02-06  1:44 ` [Intel-gfx] [PATCH 2/3] drm/i915/gt: Set the PP_DIR registers upon enabling ring submission Chris Wilson
2020-02-06 16:14   ` Mika Kuoppala
2020-02-06  1:44 ` [Intel-gfx] [PATCH 3/3] drm/i915/gt: Stop invalidating the PD cachelines for gen7 Chris Wilson
2020-02-06 16:32   ` Mika Kuoppala [this message]
2020-02-06 19:26     ` Chris Wilson
2020-02-06  4:07 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/3] drm/i915/gt: Tweak gen7 xcs flushing Patchwork
2020-02-06  4:36 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-02-06 16:35 ` [Intel-gfx] [PATCH 1/3] " Mika Kuoppala
2020-02-06 19:27   ` Chris Wilson
2020-02-08 16:35 ` [Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [1/3] " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87d0arad7t.fsf@gaia.fi.intel.com \
    --to=mika.kuoppala@linux.intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox