From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 2/3] drm/i915/gt: Set the PP_DIR registers upon enabling ring submission
Date: Thu, 06 Feb 2020 18:14:39 +0200 [thread overview]
Message-ID: <87ftfnae1c.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <20200206014439.2137800-2-chris@chris-wilson.co.uk>
Chris Wilson <chris@chris-wilson.co.uk> writes:
> Always prime the page table registers before starting the ring. Even
> though we will update these to the per-context page tables during
> dispatch, it is prudent to ensure that the registers always point to a
> valid PD.
>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
> ---
> .../gpu/drm/i915/gt/intel_ring_submission.c | 40 ++++++++++++-------
> 1 file changed, 26 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/intel_ring_submission.c b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> index 42168d7cf5b5..f915a63e1110 100644
> --- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> +++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
> @@ -635,6 +635,27 @@ static bool stop_ring(struct intel_engine_cs *engine)
> return (ENGINE_READ(engine, RING_HEAD) & HEAD_ADDR) == 0;
> }
>
> +static struct i915_address_space *vm_alias(struct i915_address_space *vm)
> +{
> + if (i915_is_ggtt(vm))
> + vm = &i915_vm_to_ggtt(vm)->alias->vm;
> +
> + return vm;
> +}
> +
> +static void set_pp_dir(struct intel_engine_cs *engine)
> +{
> + struct i915_address_space *vm = vm_alias(engine->gt->vm);
> +
> + if (vm) {
> + struct i915_ppgtt *ppgtt = i915_vm_to_ppgtt(vm);
> +
> + ENGINE_WRITE(engine, RING_PP_DIR_DCLV, PP_DIR_DCLV_2G);
I did think that for setup we set these zero first. But it seems
pointless. They should be zero after reset anywasy.
> + ENGINE_WRITE(engine, RING_PP_DIR_BASE,
> + px_base(ppgtt->pd)->ggtt_offset << 10);
Shift for 16 and then index by cacheline so 16-6 it seems.
> + }
> +}
> +
> static int xcs_resume(struct intel_engine_cs *engine)
> {
> struct drm_i915_private *dev_priv = engine->i915;
> @@ -693,6 +714,8 @@ static int xcs_resume(struct intel_engine_cs *engine)
> GEM_BUG_ON(!intel_ring_offset_valid(ring, ring->tail));
> intel_ring_update_space(ring);
>
> + set_pp_dir(engine);
> +
Then rings are off and we start by setting up the pd.
Can't figure out a better spot.
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
> /* First wake the ring up to an empty/idle ring */
> ENGINE_WRITE(engine, RING_HEAD, ring->head);
> ENGINE_WRITE(engine, RING_TAIL, ring->head);
> @@ -1169,23 +1192,12 @@ static void ring_context_destroy(struct kref *ref)
> intel_context_free(ce);
> }
>
> -static struct i915_address_space *vm_alias(struct intel_context *ce)
> -{
> - struct i915_address_space *vm;
> -
> - vm = ce->vm;
> - if (i915_is_ggtt(vm))
> - vm = &i915_vm_to_ggtt(vm)->alias->vm;
> -
> - return vm;
> -}
> -
> static int __context_pin_ppgtt(struct intel_context *ce)
> {
> struct i915_address_space *vm;
> int err = 0;
>
> - vm = vm_alias(ce);
> + vm = vm_alias(ce->vm);
> if (vm)
> err = gen6_ppgtt_pin(i915_vm_to_ppgtt((vm)));
>
> @@ -1196,7 +1208,7 @@ static void __context_unpin_ppgtt(struct intel_context *ce)
> {
> struct i915_address_space *vm;
>
> - vm = vm_alias(ce);
> + vm = vm_alias(ce->vm);
> if (vm)
> gen6_ppgtt_unpin(i915_vm_to_ppgtt(vm));
> }
> @@ -1553,7 +1565,7 @@ static int switch_context(struct i915_request *rq)
>
> GEM_BUG_ON(HAS_EXECLISTS(rq->i915));
>
> - ret = switch_mm(rq, vm_alias(ce));
> + ret = switch_mm(rq, vm_alias(ce->vm));
> if (ret)
> return ret;
>
> --
> 2.25.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-02-06 16:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-06 1:44 [Intel-gfx] [PATCH 1/3] drm/i915/gt: Tweak gen7 xcs flushing Chris Wilson
2020-02-06 1:44 ` [Intel-gfx] [PATCH 2/3] drm/i915/gt: Set the PP_DIR registers upon enabling ring submission Chris Wilson
2020-02-06 16:14 ` Mika Kuoppala [this message]
2020-02-06 1:44 ` [Intel-gfx] [PATCH 3/3] drm/i915/gt: Stop invalidating the PD cachelines for gen7 Chris Wilson
2020-02-06 16:32 ` Mika Kuoppala
2020-02-06 19:26 ` Chris Wilson
2020-02-06 4:07 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for series starting with [1/3] drm/i915/gt: Tweak gen7 xcs flushing Patchwork
2020-02-06 4:36 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-02-06 16:35 ` [Intel-gfx] [PATCH 1/3] " Mika Kuoppala
2020-02-06 19:27 ` Chris Wilson
2020-02-08 16:35 ` [Intel-gfx] ✓ Fi.CI.IGT: success for series starting with [1/3] " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ftfnae1c.fsf@gaia.fi.intel.com \
--to=mika.kuoppala@linux.intel.com \
--cc=chris@chris-wilson.co.uk \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox