From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 01/14] drm/i915: Clean up ADPA pipe select bits
Date: Tue, 20 Mar 2018 08:27:02 +0200 [thread overview]
Message-ID: <87in9rz2h5.fsf@intel.com> (raw)
In-Reply-To: <20180302095512.19329-2-ville.syrjala@linux.intel.com>
On Fri, 02 Mar 2018, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Clean up the ADPA pipe select bits. To make the whole situation a bit
> less ugly we'll start to share the same code between .get_hw_state()
> and the port state asserts.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 11 +++++-----
> drivers/gpu/drm/i915/intel_crt.c | 40 ++++++++++++++++++------------------
> drivers/gpu/drm/i915/intel_display.c | 24 +++++-----------------
> drivers/gpu/drm/i915/intel_drv.h | 2 ++
> 4 files changed, 33 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 95a2e51ecbb0..f573095d60c2 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4199,11 +4199,12 @@ enum {
>
> #define ADPA_DAC_ENABLE (1<<31)
> #define ADPA_DAC_DISABLE 0
> -#define ADPA_PIPE_SELECT_MASK (1<<30)
> -#define ADPA_PIPE_A_SELECT 0
> -#define ADPA_PIPE_B_SELECT (1<<30)
> -#define ADPA_PIPE_SELECT(pipe) ((pipe) << 30)
> -/* CPT uses bits 29:30 for pch transcoder select */
> +#define ADPA_PIPE_SEL_MASK (1<<30)
> +#define ADPA_PIPE_SEL_SHIFT 30
> +#define ADPA_PIPE_SEL(pipe) ((pipe) << 30)
> +#define ADPA_PIPE_SEL_MASK_CPT (3<<29)
> +#define ADPA_PIPE_SEL_SHIFT_CPT 29
> +#define ADPA_PIPE_SEL_CPT(pipe) ((pipe) << 29)
> #define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */
> #define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24)
> #define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24)
> diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
> index 391dd69ae0a4..88889af44608 100644
> --- a/drivers/gpu/drm/i915/intel_crt.c
> +++ b/drivers/gpu/drm/i915/intel_crt.c
> @@ -63,33 +63,35 @@ static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
> return intel_encoder_to_crt(intel_attached_encoder(connector));
> }
>
> +bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
> + i915_reg_t adpa_reg, enum pipe *pipe)
> +{
> + u32 val;
> +
> + val = I915_READ(adpa_reg);
> +
> + /* asserts want to know the pipe even if the port is disabled */
> + if (HAS_PCH_CPT(dev_priv))
> + *pipe = (val & ADPA_PIPE_SEL_MASK_CPT) >> ADPA_PIPE_SEL_SHIFT_CPT;
> + else
> + *pipe = (val & ADPA_PIPE_SEL_MASK) >> ADPA_PIPE_SEL_SHIFT;
> +
> + return val & ADPA_DAC_ENABLE;
> +}
> +
> static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
> enum pipe *pipe)
> {
> - struct drm_device *dev = encoder->base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct intel_crt *crt = intel_encoder_to_crt(encoder);
> - u32 tmp;
> bool ret;
>
> if (!intel_display_power_get_if_enabled(dev_priv,
> encoder->power_domain))
> return false;
>
> - ret = false;
> -
> - tmp = I915_READ(crt->adpa_reg);
> -
> - if (!(tmp & ADPA_DAC_ENABLE))
> - goto out;
> + ret = intel_crt_port_enabled(dev_priv, crt->adpa_reg, pipe);
>
> - if (HAS_PCH_CPT(dev_priv))
> - *pipe = PORT_TO_PIPE_CPT(tmp);
> - else
> - *pipe = PORT_TO_PIPE(tmp);
> -
> - ret = true;
> -out:
> intel_display_power_put(dev_priv, encoder->power_domain);
>
> return ret;
> @@ -168,11 +170,9 @@ static void intel_crt_set_dpms(struct intel_encoder *encoder,
> if (HAS_PCH_LPT(dev_priv))
> ; /* Those bits don't exist here */
> else if (HAS_PCH_CPT(dev_priv))
> - adpa |= PORT_TRANS_SEL_CPT(crtc->pipe);
> - else if (crtc->pipe == 0)
> - adpa |= ADPA_PIPE_A_SELECT;
> + adpa |= ADPA_PIPE_SEL_CPT(crtc->pipe);
> else
> - adpa |= ADPA_PIPE_B_SELECT;
> + adpa |= ADPA_PIPE_SEL(crtc->pipe);
>
> if (!HAS_PCH_SPLIT(dev_priv))
> I915_WRITE(BCLRPAT(crtc->pipe), 0);
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 740a918ee578..545d89152e9b 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1317,21 +1317,6 @@ static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv,
> return true;
> }
>
> -static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv,
> - enum pipe pipe, u32 val)
> -{
> - if ((val & ADPA_DAC_ENABLE) == 0)
> - return false;
> - if (HAS_PCH_CPT(dev_priv)) {
> - if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
> - return false;
> - } else {
> - if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
> - return false;
> - }
> - return true;
> -}
> -
> static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
> enum pipe pipe, i915_reg_t reg,
> u32 port_sel)
> @@ -1362,16 +1347,17 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
> static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
> enum pipe pipe)
> {
> + enum pipe port_pipe;
> u32 val;
>
> assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
> assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
> assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
>
> - val = I915_READ(PCH_ADPA);
> - I915_STATE_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
> - "PCH VGA enabled on transcoder %c, should be disabled\n",
> - pipe_name(pipe));
> + I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) &&
> + port_pipe == pipe,
> + "PCH VGA enabled on transcoder %c, should be disabled\n",
> + pipe_name(pipe));
>
> val = I915_READ(PCH_LVDS);
> I915_STATE_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 652b11e788cc..79e741845e16 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1355,6 +1355,8 @@ void gen9_enable_guc_interrupts(struct drm_i915_private *dev_priv);
> void gen9_disable_guc_interrupts(struct drm_i915_private *dev_priv);
>
> /* intel_crt.c */
> +bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
> + i915_reg_t adpa_reg, enum pipe *pipe);
> void intel_crt_init(struct drm_i915_private *dev_priv);
> void intel_crt_reset(struct drm_encoder *encoder);
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-03-20 6:27 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-02 9:54 [PATCH 00/14] drm/i915: Clean up the port pipe select bits Ville Syrjala
2018-03-02 9:54 ` [PATCH 01/14] drm/i915: Clean up ADPA " Ville Syrjala
2018-03-20 6:27 ` Jani Nikula [this message]
2018-03-02 9:55 ` [PATCH 02/14] drm/i915: Clean up LVDS " Ville Syrjala
2018-03-20 6:39 ` Jani Nikula
2018-03-02 9:55 ` [PATCH 03/14] drm/i915: Clean up SDVO " Ville Syrjala
2018-03-20 6:50 ` Jani Nikula
2018-03-02 9:55 ` [PATCH 04/14] drm/i915: Clean up TV " Ville Syrjala
2018-03-20 6:55 ` Jani Nikula
2018-03-02 9:55 ` [PATCH 05/14] drm/i915: Clean up DVO " Ville Syrjala
2018-03-20 7:00 ` Jani Nikula
2018-03-02 9:55 ` [PATCH 06/14] drm/i915: Use intel_ddi_dp_voltage_max() for HSW/BDW too Ville Syrjala
2018-03-02 9:55 ` [PATCH 07/14] drm/i915: Use the same vswing->max_preemph mapping on HSW/BDW as on SKL+ Ville Syrjala
2018-03-02 9:55 ` [PATCH 08/14] drm/i915: Check for IVB instead of gen7 when we think about IVB CPU eDP Ville Syrjala
2018-03-20 7:11 ` Jani Nikula
2018-03-02 9:55 ` [PATCH 09/14] drm/i915: Move intel_ddi_get_crtc_new_encoder() out from ddi code Ville Syrjala
2018-03-20 7:19 ` Jani Nikula
2018-03-02 9:55 ` [PATCH 10/14] drm/i915: Parametrize TRANS_DP_PORT_SEL Ville Syrjala
2018-03-20 8:36 ` Jani Nikula
2018-03-02 9:55 ` [PATCH 11/14] drm/i915: Nuke intel_trans_dp_port_sel() Ville Syrjala
2018-03-02 9:55 ` [PATCH 12/14] drm/i915: Clean up DP pipe select bits Ville Syrjala
2018-03-02 18:08 ` [PATCH v2 " Ville Syrjala
2018-03-02 9:55 ` [PATCH 13/14] drm/i915: Allow eDP on port C in theory Ville Syrjala
2018-03-02 9:55 ` [PATCH 14/14] drm/i915: Implement the missing bits of assert_panel_unlocked() Ville Syrjala
2018-03-02 11:02 ` ✗ Fi.CI.BAT: failure for drm/i915: Clean up the port pipe select bits Patchwork
2018-03-02 13:09 ` Patchwork
2018-03-02 18:40 ` ✗ Fi.CI.BAT: failure for drm/i915: Clean up the port pipe select bits (rev2) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87in9rz2h5.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox