From: Jani Nikula <jani.nikula@intel.com>
To: Arun R Murthy <arun.r.murthy@intel.com>,
intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCHv4 2/2] i915/display/dp: SDP CRC16 for 128b132b link layer
Date: Tue, 07 Mar 2023 11:09:56 +0200 [thread overview]
Message-ID: <87o7p5rkpn.fsf@intel.com> (raw)
In-Reply-To: <20230302081532.765821-3-arun.r.murthy@intel.com>
On Thu, 02 Mar 2023, Arun R Murthy <arun.r.murthy@intel.com> wrote:
> Enable SDP error detection configuration, this will set CRC16 in
> 128b/132b link layer.
> For Display version 13 a hardware bit31 in register VIDEO_DIP_CTL is
> added to enable/disable SDP CRC applicable for DP2.0 only, but the
> default value of this bit will enable CRC16 in 128b/132b hence
> skipping this write.
> Corrective actions on SDP corruption is yet to be defined.
>
> v2: Moved the CRC enable to link training init(Jani N)
> v3: Moved crc enable to ddi pre enable <Jani N>
> v4: Separate function for SDP CRC16 (Jani N)
>
> Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 4 ++++
> .../drm/i915/display/intel_dp_link_training.c | 20 +++++++++++++++++++
> .../drm/i915/display/intel_dp_link_training.h | 2 ++
> 3 files changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index e5979427b38b..127b3035f92d 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -2519,6 +2519,10 @@ static void intel_ddi_pre_enable_dp(struct intel_atomic_state *state,
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>
> + if (HAS_DP20(dev_priv))
> + intel_dp_128b132b_sdp_crc16(enc_to_intel_dp(encoder),
> + crtc_state);
> +
> if (DISPLAY_VER(dev_priv) >= 12)
> tgl_ddi_pre_enable_dp(state, encoder, crtc_state, conn_state);
> else
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> index 3d3efcf02011..35d31e4efab9 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> @@ -1454,3 +1454,23 @@ void intel_dp_start_link_train(struct intel_dp *intel_dp,
> if (!passed)
> intel_dp_schedule_fallback_link_training(intel_dp, crtc_state);
> }
> +
> +void intel_dp_128b132b_sdp_crc16(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state)
> +{
> + struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> +
> + /*
> + * VIDEO_DIP_CTL register bit 31 should be set to '0' to not
> + * disable SDP CRC. This is applicable for Display version 13.
> + * Default value of bit 31 is '0' hence discarding the write
> + * TODO: Corrective actions on SDP corruption yet to be defined
> + */
> + if (intel_dp_is_uhbr(crtc_state))
> + /* DP v2.0 SCR on SDP CRC16 for 128b/132b Link Layer */
> + drm_dp_dpcd_writeb(&intel_dp->aux,
> + DP_SDP_ERROR_DETECTION_CONFIGURATION,
> + DP_SDP_CRC16_128B132B_EN);
> +
> + drm_dbg_kms(&i915->drm, "DP2.0 SDP CRC16 for 128b/132b enabled\n");
> +}
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.h b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
> index 7fa1c0833096..2c8f2775891b 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.h
> @@ -39,4 +39,6 @@ static inline u8 intel_dp_training_pattern_symbol(u8 pattern)
> return pattern & ~DP_LINK_SCRAMBLING_DISABLE;
> }
>
> +void intel_dp_128b132b_sdp_crc16(struct intel_dp *intel_dp,
> + const struct intel_crtc_state *crtc_state);
> #endif /* __INTEL_DP_LINK_TRAINING_H__ */
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2023-03-07 9:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-02 8:15 [Intel-gfx] [PATCHv3 0/2] DP2.0 SDP CRC16 for 128/132b link layer Arun R Murthy
2023-03-02 8:15 ` [Intel-gfx] [RESEND PATCHv2 1/2] drm: Add SDP Error Detection Configuration Register Arun R Murthy
2023-03-02 8:15 ` [Intel-gfx] [PATCHv4 2/2] i915/display/dp: SDP CRC16 for 128b132b link layer Arun R Murthy
2023-03-07 9:09 ` Jani Nikula [this message]
2023-03-07 9:10 ` Jani Nikula
2023-03-21 14:49 ` Jani Nikula
2023-03-02 8:46 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for DP2.0 SDP CRC16 for 128/132b link layer (rev3) Patchwork
2023-03-02 8:57 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2023-03-14 13:52 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for DP2.0 SDP CRC16 for 128/132b link layer (rev5) Patchwork
2023-03-14 15:10 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-03-15 18:58 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o7p5rkpn.fsf@intel.com \
--to=jani.nikula@intel.com \
--cc=arun.r.murthy@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox