Re: [Intel-gfx] [PATCH] drm/i915: Add bigjoiner force enable option to debugfs

["Lisovskiy, Stanislav" <stanislav.lisovskiy@intel.com>]

On Thu, Oct 12, 2023 at 05:59:18PM +0300, Jani Nikula wrote:
> On Thu, 12 Oct 2023, Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> wrote:
> > For validation purposes, it might be useful to be able to
> > force Bigjoiner mode, even if current dotclock/resolution
> > do not require that.
> > Lets add such to option to debugfs.
> >
> > v2: - Apparently intel_dp_need_bigjoiner can't be used, when
> >       debugfs entry is created so lets just check manually
> >       the DISPLAY_VER.
> >
> > v3: - Switch to intel_connector from drm_connector(Jani Nikula)
> >     - Remove redundant modeset lock(Jani Nikula)
> >     - Use kstrtobool_from_user for boolean value(Jani Nikula)
> >
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> > ---
> >  .../drm/i915/display/intel_display_debugfs.c  | 72 ++++++++++++++++++-
> >  .../drm/i915/display/intel_display_types.h    |  2 +
> >  drivers/gpu/drm/i915/display/intel_dp.c       |  6 +-
> >  3 files changed, 76 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > index fbe75d47a165..dea7bbea83ba 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > @@ -1398,13 +1398,37 @@ out:	drm_modeset_unlock(&dev->mode_config.connection_mutex);
> >  	return ret;
> >  }
> >  
> > +static int i915_bigjoiner_enable_show(struct seq_file *m, void *data)
> > +{
> > +	struct intel_connector *connector = to_intel_connector(m->private);
> > +	struct drm_crtc *crtc;
> > +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> > +	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > +	int ret;
> > +
> > +	if (!encoder)
> > +		return -ENODEV;
> > +
> > +	crtc = connector->base.state->crtc;
> > +	if (connector->base.status != connector_status_connected || !crtc) {
> > +		ret = -ENODEV;
> > +		goto out;
> > +	}
> > +
> > +	seq_printf(m, "Bigjoiner enable: %d\n", intel_dp->force_bigjoiner_enable);
> > +
> > +out:
> > +
> > +	return ret;
> > +}
> > +
> >  static ssize_t i915_dsc_output_format_write(struct file *file,
> >  					    const char __user *ubuf,
> >  					    size_t len, loff_t *offp)
> >  {
> > -	struct drm_connector *connector =
> > -		((struct seq_file *)file->private_data)->private;
> > -	struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
> > +	struct seq_file *m = file->private_data;
> > +        struct intel_connector *connector = m->private;
> > +	struct intel_encoder *encoder = intel_attached_encoder(connector);
> 
> Ooops, I think you made those changes to the wrong function there. ;)

Ouch, they looked exactly identical! I would say this could have been changed too,
but not in that patch indeed :)))
Thanks for spotting..probably really time to think about starting using glasses.

> 
> >  	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> >  	int dsc_output_format = 0;
> >  	int ret;
> > @@ -1419,12 +1443,39 @@ static ssize_t i915_dsc_output_format_write(struct file *file,
> >  	return len;
> >  }
> >  
> > +static ssize_t i915_bigjoiner_enable_fops_write(struct file *file,
> > +						const char __user *ubuf,
> > +						size_t len, loff_t *offp)
> > +{
> > +	struct drm_connector *connector =
> > +		((struct seq_file *)file->private_data)->private;
> > +	struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
> 
> Should be here.
> 
> > +	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> > +	bool bigjoiner_en = 0;
> > +	int ret;
> > +
> > +	ret = kstrtobool_from_user(ubuf, len, &bigjoiner_en);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	intel_dp->force_bigjoiner_enable = bigjoiner_en;
> > +	*offp += len;
> > +
> > +	return len;
> > +}
> > +
> >  static int i915_dsc_output_format_open(struct inode *inode,
> >  				       struct file *file)
> >  {
> >  	return single_open(file, i915_dsc_output_format_show, inode->i_private);
> >  }
> >  
> > +static int i915_bigjoiner_enable_open(struct inode *inode,
> > +				      struct file *file)
> > +{
> > +	return single_open(file, i915_bigjoiner_enable_show, inode->i_private);
> > +}
> > +
> >  static const struct file_operations i915_dsc_output_format_fops = {
> >  	.owner = THIS_MODULE,
> >  	.open = i915_dsc_output_format_open,
> > @@ -1434,6 +1485,15 @@ static const struct file_operations i915_dsc_output_format_fops = {
> >  	.write = i915_dsc_output_format_write
> >  };
> >  
> > +static const struct file_operations i915_bigjoiner_enable_fops = {
> > +	.owner = THIS_MODULE,
> > +	.open = i915_bigjoiner_enable_open,
> > +	.read = seq_read,
> > +	.llseek = seq_lseek,
> > +	.release = single_release,
> > +	.write = i915_bigjoiner_enable_fops_write
> > +};
> > +
> >  /*
> >   * Returns the Current CRTC's bpc.
> >   * Example usage: cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc
> > @@ -1513,6 +1573,12 @@ void intel_connector_debugfs_add(struct intel_connector *intel_connector)
> >  				    connector, &i915_dsc_output_format_fops);
> >  	}
> >  
> > +	if (DISPLAY_VER(dev_priv) >= 11 &&
> > +	    intel_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
> > +		debugfs_create_file("i915_bigjoiner_force_enable", 0644, root,
> > +				    &intel_connector->base, &i915_bigjoiner_enable_fops);
> > +	}
> > +
> >  	if (connector->connector_type == DRM_MODE_CONNECTOR_DSI ||
> >  	    connector->connector_type == DRM_MODE_CONNECTOR_eDP ||
> >  	    connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 8d8b2f8d37a9..e0de6eeaf59e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1753,6 +1753,8 @@ struct intel_dp {
> >  	bool is_mst;
> >  	int active_mst_links;
> >  
> > +	bool force_bigjoiner_enable;
> > +
> >  	/* connector directly attached - won't be use for modeset in mst world */
> >  	struct intel_connector *attached_connector;
> >  
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 0ef7cb8134b6..daf9bc0d6838 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -1153,7 +1153,11 @@ bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp,
> >  	if (!intel_dp_can_bigjoiner(intel_dp))
> >  		return false;
> >  
> > -	return clock > i915->max_dotclk_freq || hdisplay > 5120;
> > +	if (intel_dp->force_bigjoiner_enable)
> > +		drm_dbg_kms(&i915->drm, "Forcing bigjoiner mode\n");
> > +
> > +	return clock > i915->max_dotclk_freq || hdisplay > 5120 ||
> > +	       intel_dp->force_bigjoiner_enable;
> >  }
> >  
> >  static enum drm_mode_status
> 
> -- 
> Jani Nikula, Intel