From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
suraj.kandpal@intel.com
Subject: Re: [PATCH 07/15] drm/i915: Split current joiner hw state readout
Date: Thu, 19 Sep 2024 18:18:17 +0300 [thread overview]
Message-ID: <ZuxAufMczyfSMX6B@intel.com> (raw)
In-Reply-To: <20240918144343.2876184-8-ankit.k.nautiyal@intel.com>
On Wed, Sep 18, 2024 at 08:13:35PM +0530, Ankit Nautiyal wrote:
> We need to add a new sanity checks and also do
> some preparations for adding ultrajoiner hw state readout.
> Lets first split reading of the uncompressed joiner and bigjoiner
> bit masks into separate functions.
>
> v2: Fixed checkpatch warnings (Ankit)
> v3: Use struct intel_display in the new functions. (Ankit)
> v4: Use check for bigjoiner before reading the regs. (Ville)
>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 74 +++++++++++++++-----
> 1 file changed, 55 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 7cdc12188df9..28447d4c8934 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3591,26 +3591,57 @@ static bool transcoder_ddi_func_is_enabled(struct drm_i915_private *dev_priv,
> return tmp & TRANS_DDI_FUNC_ENABLE;
> }
>
> -static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> - u8 *primary_pipes, u8 *secondary_pipes)
> +static void enabled_uncompressed_joiner_pipes(struct intel_display *display,
> + u8 *primary_pipes, u8 *secondary_pipes)
> {
> + struct drm_i915_private *i915 = to_i915(display->drm);
> struct intel_crtc *crtc;
>
> *primary_pipes = 0;
> *secondary_pipes = 0;
>
> - if (!HAS_BIGJOINER(dev_priv))
> + if (!HAS_UNCOMPRESSED_JOINER(display))
> return;
>
> - for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, crtc,
> - joiner_pipes(dev_priv)) {
> + for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc,
> + joiner_pipes(i915)) {
> enum intel_display_power_domain power_domain;
> enum pipe pipe = crtc->pipe;
> intel_wakeref_t wakeref;
>
> - power_domain = intel_dsc_power_domain(crtc, (enum transcoder) pipe);
> - with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) {
> - u32 tmp = intel_de_read(dev_priv, ICL_PIPE_DSS_CTL1(pipe));
> + power_domain = POWER_DOMAIN_PIPE(pipe);
> + with_intel_display_power_if_enabled(i915, power_domain, wakeref) {
> + u32 tmp = intel_de_read(display, ICL_PIPE_DSS_CTL1(pipe));
> +
> + if (tmp & UNCOMPRESSED_JOINER_PRIMARY)
> + *primary_pipes |= BIT(pipe);
> + if (tmp & UNCOMPRESSED_JOINER_SECONDARY)
> + *secondary_pipes |= BIT(pipe);
> + }
> + }
> +}
> +
> +static void enabled_bigjoiner_pipes(struct intel_display *display,
> + u8 *primary_pipes, u8 *secondary_pipes)
> +{
> + struct drm_i915_private *i915 = to_i915(display->drm);
> + struct intel_crtc *crtc;
> +
> + *primary_pipes = 0;
> + *secondary_pipes = 0;
> +
> + if (!HAS_BIGJOINER(display))
> + return;
> +
> + for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc,
> + joiner_pipes(i915)) {
> + enum intel_display_power_domain power_domain;
> + enum pipe pipe = crtc->pipe;
> + intel_wakeref_t wakeref;
> +
> + power_domain = intel_dsc_power_domain(crtc, (enum transcoder)pipe);
> + with_intel_display_power_if_enabled(i915, power_domain, wakeref) {
> + u32 tmp = intel_de_read(display, ICL_PIPE_DSS_CTL1(pipe));
>
> if (!(tmp & BIG_JOINER_ENABLE))
> continue;
> @@ -3620,20 +3651,25 @@ static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> else
> *secondary_pipes |= BIT(pipe);
> }
> + }
> +}
>
> - if (!HAS_UNCOMPRESSED_JOINER(dev_priv))
> - continue;
> +static void enabled_joiner_pipes(struct drm_i915_private *dev_priv,
> + u8 *primary_pipes, u8 *secondary_pipes)
> +{
> + struct intel_display *display = to_intel_display(&dev_priv->drm);
> + u8 primary_uncompressed_joiner_pipes, primary_bigjoiner_pipes;
> + u8 secondary_uncompressed_joiner_pipes, secondary_bigjoiner_pipes;
>
> - power_domain = POWER_DOMAIN_PIPE(pipe);
> - with_intel_display_power_if_enabled(dev_priv, power_domain, wakeref) {
> - u32 tmp = intel_de_read(dev_priv, ICL_PIPE_DSS_CTL1(pipe));
> + enabled_uncompressed_joiner_pipes(display, &primary_uncompressed_joiner_pipes,
> + &secondary_uncompressed_joiner_pipes);
>
> - if (tmp & UNCOMPRESSED_JOINER_PRIMARY)
> - *primary_pipes |= BIT(pipe);
> - if (tmp & UNCOMPRESSED_JOINER_SECONDARY)
> - *secondary_pipes |= BIT(pipe);
> - }
> - }
> + enabled_bigjoiner_pipes(display, &primary_bigjoiner_pipes,
> + &secondary_bigjoiner_pipes);
> +
> + *primary_pipes = primary_uncompressed_joiner_pipes | primary_bigjoiner_pipes;
> +
> + *secondary_pipes = secondary_uncompressed_joiner_pipes | secondary_bigjoiner_pipes;
>
> /* Joiner pipes should always be consecutive primary and secondary */
> drm_WARN(&dev_priv->drm, *secondary_pipes != *primary_pipes << 1,
> --
> 2.45.2
--
Ville Syrjälä
Intel
next prev parent reply other threads:[~2024-09-19 15:18 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 14:43 [PATCH 00/15] Ultrajoiner basic functionality series Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 01/15] drm/i915: Add some essential functionality for joiners Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 02/15] drm/i915/display: Enhance iterators for modeset en/disable Ankit Nautiyal
2024-09-18 14:43 ` [PATCH 03/15] drm/i915/display_debugfs: Allow force joiner only if supported Ankit Nautiyal
2024-09-19 15:04 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 04/15] drm/i915/display: Modify debugfs for joiner to force n pipes Ankit Nautiyal
2024-09-19 15:07 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 05/15] drm/i915/dp: Add helper to compute num pipes required Ankit Nautiyal
2024-09-19 15:12 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 06/15] drm/i915/display: Add debugfs support to avoid joiner Ankit Nautiyal
2024-09-19 15:15 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 07/15] drm/i915: Split current joiner hw state readout Ankit Nautiyal
2024-09-19 15:18 ` Ville Syrjälä [this message]
2024-09-18 14:43 ` [PATCH 08/15] drm/i915: Add bigjoiner and uncompressed joiner hw readout sanity checks Ankit Nautiyal
2024-09-19 15:22 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 09/15] drm/i915/display: Add macro HAS_ULTRAJOINER() Ankit Nautiyal
2024-09-19 15:24 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 10/15] drm/i915: Implement hw state readout and checks for ultrajoiner Ankit Nautiyal
2024-09-19 15:33 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 11/15] drm/i915/display: Refactor enable_joiner_pipes Ankit Nautiyal
2024-09-19 18:02 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 12/15] drm/i915/display/vdsc: Add ultrajoiner support with DSC Ankit Nautiyal
2024-09-19 18:06 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 13/15] drm/i915: Compute config and mode valid changes for ultrajoiner Ankit Nautiyal
2024-09-19 18:30 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 14/15] drm/i915/display: Consider ultrajoiner for computing maxdotclock Ankit Nautiyal
2024-09-19 18:42 ` Ville Syrjälä
2024-09-18 14:43 ` [PATCH 15/15] drm/i915/intel_dp: Add support for forcing ultrajoiner Ankit Nautiyal
2024-09-19 18:45 ` Ville Syrjälä
2024-09-18 15:22 ` ✗ Fi.CI.CHECKPATCH: warning for Ultrajoiner basic functionality series (rev9) Patchwork
2024-09-18 15:22 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-09-18 15:30 ` ✓ Fi.CI.BAT: success " Patchwork
2024-09-19 5:01 ` ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZuxAufMczyfSMX6B@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=suraj.kandpal@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox